Abstract:The Exciplex Pumped Alkali Laser (XPAL) system, which is similar to DPAL (Diode Pumped Alkali vapor Laser), has been demonstrated in mixtures of Cs vapor, Ar, with and without ethane. Unlike DPAL, it uses the broadband absorption blue satellite of the alkali D-2 line, created by naturally occuring collision pairs. For example, Cs-Ar collision pairs have an absorption width which is as wide as the one of commercial semiconductor diode lasers. A continuous wave XPAL four-level theoretical model is presented in this paper. More factors are considered, such as the spectral dependence of pumped laser absorption for broadband pumping and the longitudinal population variation. Some intra-cavity details, such as longitudinal distributions of pumped laser and alkali laser, can also be solved well. The predictions of optical-to-optical efficiency as a function of temperature and pumped laser intensity are presented. The model predicts that there is an optimum value of temperature or pumped laser intensity. The analysis of the influence of cell length on optical-to-optical efficiency shows that a better performance can be achieved when using longer cell. The prediction of influence of Ar concentration and reflectivity of output coupler shows that higher optical-to-optical efficiency could be achieved if lower reflectivity of output coupler and higher Ar concentration are used. The optical-to-optical efficiency as high as 84% achieved by optimizing configuration with the pumped intensity of 5 x 10(7) W/cm(2) presented shows that broadband pumped four-level XPAL system has a potential of high optical-to-optical efficiency. (C) 2015 Optical Society of America

Self-heated diode-pumped alkali laser with a microfabricated alkali cell

Modeling of Time Evolution of Power and Temperature in Single-Pulse and Multi-Pulses Diode-Pumped Alkali Vapor Lasers

Analysis of temperature distributions in diode-pumped alkali vapor lasers

Modeling of a Diode Four-Side Pumped Cesium Vapor Laser Amplifier with Flowing Medium

Thermal Effects of High-Power Side-Pumped Alkali Vapor Lasers and the Compensation Method

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Modeling of Steady-State Temperature Distribution in Diode-Pumped Alkali Vapor Lasers: Analysis of the Experimental Results

Modeling of a diode four-side symmetrically pumped alkali vapor amplifier.

Three-Dimensional Kinetic and Fluid Dynamic Modeling and Three Iterative Algorithms for Side-Pumped Alkali Vapor Lasers

Modeling of the Static and Flowing-Gas Ring-Ld Side-Pumped Alkali Vapor Amplifiers

Theoretical Analysis of the Semi-Ring and Trapezoid LD Side-Pumped Alkali Vapor Lasers

Modeling of an alkali vapor laser MOPA system

Investigation of Pump-to-seed Beam Matching on Output Features of Rb and Cs Vapor Laser Amplifiers

Influences of Operating Parameters on Deleterious Processes of Side-Pumped Cesium Vapor Laser Amplifiers with Flowing Medium

Detailed Computation on Exciplex Pumped Alkali Vapor Laser with Supersonic Flow

Output Properties of Self-Heated Alkali Laser with Mini Vapor Cell

Comparative Study of Diode-Pumped Alkali Vapor Laser and Exciplex-Pumped Alkali Laser Systems and Selection Principal of Parameters

Theoretical model and simulations for a cw exciplex pumped alkali laser.

Modeling of Pulsed Cs Vapor Lasers in Transversely Pumped Configuration

Investigations on the carbon contaminations on the alkali cells of DPAL with hydrocarbon buffer