NiCo Bimetallic Nanoparticles Encapsulated in Graphite-Like Carbon Layers As Efficient and Robust Hydrogenation Catalysts

Ting Ni,Sai Zhang,Fangxian Cao,Yuanyuan Ma

DOI: https://doi.org/10.1039/c7qi00492c

IF: 7.779

2017-01-01

Inorganic Chemistry Frontiers

Abstract:The highest catalytic performance of Ni0.5Co0.5@NC catalysts can be attributed to their optimized electronic structure to facilitate the hydrogen activation.

What problem does this paper attempt to address?

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Yeliang Sheng,Jinfei Peng,Lei Ma,Yunyi Zhang,Taotao Jiang,Xiaonian Li

DOI: https://doi.org/10.1016/j.carbon.2022.06.017

IF: 10.9

2022-01-01

Carbon

Abstract:The preparation method of porous carbon coated honeycomb ceramic monolithic catalysts is limited to tradi-tional ideas. The porous carbon and the active metal particles are formed step by step. We have designed a novel preparation method and constructed a series of nickel-embedded porous carbon-coated (Ni@C) monolithic catalysts with different carbonization temperatures. Through the synchronous formation of porous carbon and active metal particles, the relationship between porous carbon and metal is changed from "supported " to "embedded ". The "embedded " structure between nickel particles and porous carbon formed at suitable carbonization temperature is an inseparable whole. Correlation characterization results show that the "embedded " structure has not changed the physical-chemical properties of porous carbon. However, the effect on the physical-chemical properties of nickel particles is very significant. Compared with conventional supported nickel-based monolithic catalysts (NiO/C), embedded nickel particles in the Ni@C monolithic catalyst have four characteristics. They are more uniform particle dispersion, smaller average particle size, more difficult to migrate and stable in metallic Ni0 form in air. Based on these advantages, Ni@C monolithic catalysts show better catalytic activity, stability and convenience in the continuous catalytic hydrogenation of aromatic nitro compounds.
Co-modified Ni/N-doped Carbon As Electrocatalysts for HER and OER

Shen Xinyi,Tan Wei,Wei Zhicheng,Wang Xianyi,Zhou Hailong,Lv Jianguo,Zhao Min,Hefei Normal University,Yang Jin,He Gang,Yang Lei

DOI: https://doi.org/10.1007/s10854-021-06782-w

2021-01-01

Journal of Materials Science Materials in Electronics

Abstract:Ni,Co-MOFs have been synthetized by a simple hydrothermal method. Subsequently, Co,Ni/N-doped porous carbon have been prepared by pyrolysis method using the Ni,Co-MOFs as precursor. The results show that the samples present high degree of graphitization. The Co-1–Ni-0.5/NC possesses the largest BET surface area (94.73 m2/g) and pore volume (0.456 cm3/g). The Co-1–Ni-0.5/NC presents the smallest HER overpotential (179 mV) and the best electrocatalytic activity for HER. The Co-0.5–Ni-0.5/NC and Co-1–Ni-0.5/NC have the relatively low overpotential for OER, which are about 348 mV and 383 mV, respectively. The smallest Tafel slope value indicates that Co-1–Ni-0.5/NC presents the best electrocatalytic reactive kinetics. Excellent electrocatalytic performance may be attributed to the more active sites, the higher specific surface area and mesopores as well as the lower charge-transfer resistance. The excellent HER and OER of Co-1–Ni-0.5/NC make its potential to be used on overall water splitting.
Nickel–platinum Nanoparticles Immobilized on Graphitic Carbon Nitride As Highly Efficient Catalyst for Hydrogen Release from Hydrous Hydrazine

Lixin Xu,Na Liu,Bing Hong,Ping Cui,Dang-guo Cheng,Fengqiu Chen,Yue An,Chao Wan

DOI: https://doi.org/10.1039/c6ra01335j

IF: 4.036

2016-01-01

RSC Advances

Abstract:Here we demonstrate that the combination of NiPt alloy nanoparticles with a graphitic carbon nitride (g-C3N4) support facilitates H2 production from hydrous hydrazine in an alkaline solution under moderate conditions.
NiCoP/CoP Nanoparticles Supported on Ti<sub>4</sub>O<sub>7</sub> as the Electrocatalyst Possessing an Excellent Catalytic Performance toward the Hydrogen Evolution Reaction

Dan Ma,Ruihao Li,Zhilin Zheng,Zhijun Jia,Kai Meng,Yi Wang,Guangming Zhu,Hui Zhang,Tao Qi

DOI: https://doi.org/10.1021/acssuschemeng.8b02935

IF: 8.4

2018-01-01

ACS Sustainable Chemistry & Engineering

Abstract:NiCoP/CoP nanoparticles and NiCoP/CoP nanoparticles supported on carbon black (NiCoP/CoP–C) and titanium suboxide (NiCoP/CoP–Ti4O7), respectively, are prepared by a hydrothermal method followed by two steps of low temperature annealing processes. As hydrogen evolution reaction (HER) catalysts, the activities of the three catalysts are measured by linear sweep voltammetry (LSV), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and so on. Impressively, NiCoP/CoP–Ti4O7 shows the best electrocatalytic performance for HER with an ultralow overpotential of 128 mV at 10 mA cm–2 along with negligible catalytic activity degradation after 1000 cycles of CV, which is partly ascribed to the high conductivity and corrosion resistance of Ti4O7. According to the characterization of X-ray photoelectron spectra (XPS), it is found that NiCoP/CoP–Ti4O7 has a higher ratio of Ni2+ and surface defects, which can be also used to explain the reason why NiCoP/CoP–Ti4O7 owns the most preeminent HER activity among the three catalysts.
NiCoP/CoP nanoparticles supported on Ti4O7 as the electrocatalyst possessing an excellent catalytic performance toward hydrogen evolution reaction

Dan Ma,Ruihao Li,Zhilin Zheng,Zhijun Jia,Kai Meng,Yi Wang,Guangming Zhu,Hui Zhang,Tao Qi

DOI: https://doi.org/10.1021/acssuschemeng.8b02935

IF: 8.4

2018-01-01

ACS Sustainable Chemistry & Engineering

Abstract:NiCoP/CoP nanoparticles and NiCoP/CoP nanoparticles supported on carbon black (NiCoP/CoP–C) and titanium suboxide (NiCoP/CoP–Ti4O7), respectively, are prepared by a hydrothermal method followed by two steps of low temperature annealing processes. As hydrogen evolution reaction (HER) catalysts, the activities of the three catalysts are measured by linear sweep voltammetry (LSV), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and so on. Impressively, NiCoP/CoP–Ti4O7 shows the best electrocatalytic performance for HER with an ultralow overpotential of 128 mV at 10 mA cm–2 along with negligible catalytic activity degradation after 1000 cycles of CV, which is partly ascribed to the high conductivity and corrosion resistance of Ti4O7. According to the characterization of X-ray photoelectron spectra (XPS), it is found that NiCoP/CoP–Ti4O7 has a higher ratio of Ni2+ and surface defects, which can be also used to explain the reason why NiCoP/CoP–Ti4O7 owns the most preeminent HER activity a...
NiCo Nanoalloy Encapsulated in Graphene Layers for Improving Hydrogen Storage Properties of LiAlH 4

Chengli Jiao,Lixian Sun,Fen Xu,Shu-Sheng Liu,Jian Zhang,Xia Jiang,Lini Yang

DOI: https://doi.org/10.1038/srep27429

IF: 4.6

2016-01-01

Scientific Reports

Abstract:NiCo nanoalloy (4–6 nm) encapsulated in grapheme layers (NiCo@G) has been prepared by thermolysis of a 3D bimetallic complex CoCo[Ni(EDTA)] 2 ·4H 2 O and successfully employed as a catalyst to improve the dehydrogenation performances of LiAlH 4 by solid ball-milling. NiCo@G presents a superior catalytic effect on the dehydrogenation of LiAlH 4 . For LiAlH 4 doped with 1 wt% NiCo@G (LiAlH 4 -1 wt% NiCo@G), the onset dehydrogenation temperature of LiAlH 4 is as low as 43 °C, which is 109 °C lower than that of pristine LiAlH 4 . 7.3 wt% of hydrogen can be released from LiAlH 4 -1 wt% NiCo@G at 150 °C within 60 min. The activation energies of LiAlH 4 dehydrogenation are extremely reduced by 1 wt% NiCo@G doping.
Synthesis of Mesoporous Silica-Supported NiCo Bimetallic Nanocatalysts and Their Enhanced Catalytic Hydrogenation Performance

Jiajuan Li,Zizhu Wang,Yirui Ma,Caiyun Xu,Shenghu Zhou

DOI: https://doi.org/10.1021/acsomega.3c00076

IF: 4.1

2023-03-20

ACS Omega

Abstract:In this work, mesoporous silica SBA-16-supported NiCo bimetallic nanocatalysts were synthesized by coimpregnation of Ni and Co precursors followed by calcination and reduction, and various characterization techniques confirm the formation of NiCo bimetallic nanostructures in the catalysts. The synthesized NiCo/SBA-16 shows enhanced catalytic performance for hydrogenation of a series of nitroaromatics. Under the reaction conditions of 80 °C and 1.0 MPa of H2, the yields of aniline for nitrobenzene hydrogenation over NiCo0.3/SBA-16 can reach more than 99% at 2.0 h. The enhanced catalytic performance can be ascribed to the formation of NiCo bimetallic nanostructures, where the synergistic effect between Ni and Co improves their catalytic activities for hydrogenation of nitroaromatics.
Nitrogen-coordinated Cobalt Nanocrystals for Oxidative Dehydrogenation and Hydrogenation of N-heterocycles

Yue Wu,Zheng Chen,Weng-Chon Cheong,Chao Zhang,Lirong Zheng,Wensheng Yan,Rong Yu,Chen,Yadong Li

DOI: https://doi.org/10.1039/c9sc00475k

IF: 8.4

2019-01-01

Chemical Science

Abstract:To endow non-noble metals with the high catalytic activity that is typically exhibited by noble metals is the central yet challenging aim for substituting noble metals. In this regard, by exploiting the coordination effect of nitrogen, we prepared cobalt nanocrystals stabilized by nitrogen-doped graphitized carbon (Co NCs/N-C). The obtained Co NC/N-C catalyst showed extraordinary performances toward both oxidative dehydrogenation of N-heterocycles and its reverse hydrogenation process under extremely mild conditions. A nearly quantitative conversion could be achieved for oxidative dehydrogenation even at room temperature (25 °C), for which the coordination effect of nitrogen is responsible: the interaction of Co-N induces a partial positive charge on the Co surface, thereby promoting the reaction. In contrast, cobalt nanocrystals supported by pristine carbon (Co NCs/C) proved to be inactive for oxidative dehydrogenation, owing to the lack of nitrogen. Moreover, in Co NCs/N-C, the N-doped graphitized carbon formed a protective layer for Co NCs, which preserved the active valence of Co species and prevented the catalyst from leaching. It was found that the catalyst still retained its excellent catalytic activity after five regeneration cycles; in comparison, its cobaltous oxide counterpart (CoO x /N-C) was barely active. As for the mechanism, electron paramagnetic resonance (EPR) analysis revealed the formation of superoxide anion radicals during the dehydrogenation process. Interestingly, the pressure of feed hydrogen had little effect on the hydrogenation process. Our Co NC/N-C catalyst is capable of activating molecular oxygen and hydrogen as effectively as noble metals; the coordination effect of nitrogen and the protection by the carbon layer in combination confer tremendous potential on the Co NCs/N-C for substituting noble-metal-based catalysts and soluble catalysts for homogeneous reactions.
Porous N-Doped Carbon-Encapsulated CoNi Alloy Nanoparticles Derived from MOFs As Efficient Bifunctional Oxygen Electrocatalysts.

Honghui Ning,Guoqiang Li,Yu Chen,Kaikai Zhang,Zhuang Gong,Renfeng Nie,Wei Hu,Qinghua Xia

DOI: https://doi.org/10.1021/acsami.8b13290

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:A porous N-doped carbon-encapsulated CoNi alloy nanoparticle composite (CoNi@N-C) was prepared using a bimetallic metal-organic framework composite as the precursor. The optimal prepared Co1Ni1@N-C material at 800 °C exhibited well-defined porosities, uniform CoNi alloy nanoparticle dispersion, a high doped-N level, and scattered CoNi-N x active sites, therefore affording excellent oxygen catalytic activities toward the reduction and evolution processes of oxygen. The oxygen reduction (ORR) onset potential ( Eonset) on Co1Ni1@N-C was 0.91 V and the half-wave potential ( E1/2) was 0.82 V, very close to the parameters recorded on the Pt/C (20 wt Pt%) benchmark. Moreover, it is worth noting that the ORR stability of Co1Ni1@N-C was prominently higher than that of Pt/C. Under the oxygen evolution reaction condition, Co1Ni1@N-C generated the maximum current density at the potential of 1.7 V (8.60 mA cm-2) and the earliest Eonset (1.35 V) among all Co xNi y@N-C hybrids. The Co1Ni1@N-C catalyst exhibited the smallest Δ E value, confirming the superior bifunctional activity. The high surface area and porosity, and CoNi-N x active sites on the carbon surface including the proper interactions between the N-doped C shell and CoNi nanoparticles were attributed as the main contributors to the outstanding oxygen electrocatalytic property and good stability.
Graphitic carbon nitride supported Ni-Co dual-atom catalysts beyond Ni 1 (Co 1 ) single-atom catalysts for hydrogen production: A density functional theory study

Yue He,Furui Chen,Gang Zhou

DOI: https://doi.org/10.1039/d4cp00616j

IF: 3.3

2024-04-26

Physical Chemistry Chemical Physics

Abstract:Using density functional theory calculations we investigate the formation, structural and electronic properties of gh-C3N4-supported Ni-Co (Ni-Co/gh-C3N4) dual-atom catalysts and Ni1(Co1) single-metal catalysts, as a paradigmatic example of single-atom versus few-atom catalysts. An inverted mold assumption is proposed to identify the factors determining the number, shape and packing manner of metal atoms inside the pores of gh-C3N4. The area matching between virtual fragments and metal fillers and lattice inheritance from N coordinations and metal aggregates allow for a stable Ni-Co/gh-C3N4, which would possess more active sites and more complex structure-activity relation than single-atom doping. The hydrogen production behavior and catalytic activity of this catalyst are comprehensively discussed. Ni-Co/gh-C3N4 exhibits higher hydrogen evolution activity than Ni1(Co1)/gh-C3N4 at an appropriate H coverage, which is approximately comparable to Pt under analogous conditions. This strategy, derived from the inverted mold assumption, is deemed to be a simple and easy-to-operate method for designing and building metal aggregates confined inside the pores of two-dimensional materials and in the cavities of nanoparticles for few-atom catalysts.

chemistry, physical,physics, atomic, molecular & chemical
Nitrogen-doped mesoporous carbon-armored cobalt nanoparticles as efficient hydrogen evolving electrocatalysts.

Duihai Tang,Kuo Li,Wenting Zhang,Zhen-An Qiao,Junjiang Zhu,Zhen Zhao

DOI: https://doi.org/10.1016/j.jcis.2017.12.026

IF: 9.9

2017-01-01

Journal of Colloid and Interface Science

Abstract:A series of Co nanoparticles embedded, N-doped mesoporous carbons have been synthesized through chelate-assisted co-assembly strategy followed by thermal treatment. The preparation is based on an assembly process, with evaporation of an ethanol-water solution containing melamine formaldehyde resin (MF resin) as carbon source, nitrogen source, and chelating agent. Moreover, F127 and Co(NO3)2 are used as template and metallic precursor, respectively. The Co nanoparticles embedded, N-doped mesoporous carbon annealed at 800 °C (denoted as MFCo800) shows high electrocatalytic activity for hydrogen evolution reaction (HER) with high current density and low overpotential, which has the ability to operate in both acidic and alkaline electrolytes.
2D/2D-Ni–Co–B/rGO Nanolayers Prepared by Galvanic Replacement for Hydrogen Generation through NaBH 4 Hydrolysis

Mengtian Shi,Yongjiang Hou,Xiaohan Du,Jie Guo,Bo Li,Yixuan Li

DOI: https://doi.org/10.1021/acsanm.3c00515

IF: 6.14

2023-04-18

ACS Applied Nano Materials

Abstract:While non-precious metals like Co and Ni have shown good performance in generating hydrogen from NaBH4, the challenges of catalyst agglomeration and deactivation have become a focus of future research. To address this issue, in this study, Co nanoparticles on graphene carriers and controllably replaced with nickel atoms to form highly dispersed two-dimensional (2D)/2D Ni–Co nanolayers by Galvanic Replacement Reaction were prepared. Characterization analyses (transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and hydrogen temperature-programmed desorption (H2 TPD)) suggested that 2D/2D Ni–Co nanolayer catalysts were observed with ultrathin nanolayer structures after using graphene as a carrier. In the hydrogen generation process, the Ni atoms as the main active centers, combined with the synergistic effect of Co and the good conductivity of graphene, contribute to improved hydrogen release. The 2D material showed good hydrogen generation performance, with a rate of 4300 mL·(min·g)−1, maintenance of 94% hydrogen generating activity after five cycles, and lower activation energy of 29 kJ·mol–1.

materials science, multidisciplinary,nanoscience & nanotechnology
Structural and electronic engineering of Co‐doped Ni3C nanoparticles encapsulated in ultrathin carbon layers for hydrogen evolution reaction

Tianyu Zhang,Shensong Wang,Fengling Zhou,Sangaraju Shanmugam,Hasuck Kim,Xinyi Zhang

DOI: https://doi.org/10.1002/cctc.202300883

IF: 4.5

2023-09-21

ChemCatChem

Abstract:With resurgent interest in green hydrogen as a key element in the transition to a renewable‐energy economy, developing efficient, earth‐abundant, and low‐cost catalysts for hydrogen evolution reaction (HER) is becoming increasingly important but is still very challenging. Herein, we report the synthesis of Co‐doped Ni3C nanoparticles encapsulated in ultrathin carbon layers (CNCC) by in‐situ thermal decomposition of organic‐inorganic hybrid as high‐performance HER electrocatalysts. Experimental and density functional theory studies evidence that the substantial high‐index (113) surfaces in synergy with a few atomic carbon layers contribute significantly to the activity and stability, while the electronic structure of Ni3C is optimized through tuning the Co content to enhance the intrinsic kinetics for HER. The CNCC exhibits excellent HER activities with overpotentials at 10 mA cm−2 (η10) of 102 and 69 mV and Tafel slopes of 74 and 43 mV dec‐1 in respective neutral and alkaline media along with a superior stability without noticeable decay up to 100 h. More importantly, the CNCC outperforms the benchmark Pt/C catalyst under high current density (> 38 mA cm‐2) in an alkaline electrolyte, showing great potential for practical hydrogen production.

chemistry, physical
Encapsulated Ni Nanoparticles in the Incomplete Graphite Layer Anchored on NiMo Oxides Enabling Superior Hydrogen Evolution to Pt

Jiajia Lu,Peng-Jun Deng,Anyong Chen,Chen Yang,Hongwei Zhu,Han-Pu Liang

DOI: https://doi.org/10.1039/d2ta07871f

IF: 11.9

2023-01-01

Journal of Materials Chemistry A

Abstract:Carbon-encapsulation and etching–hydrolysis strategies are deployed to synthesize encapsulated Ni nanoparticles in the incomplete graphite layer anchored on NiMo oxides, which show superior hydrogen evolution to Pt.
Carbon dots-induced carbon-coated Ni and Mo2N nanosheets for efficient hydrogen production

Fan Liu,Yang Tang,Jiaming Zhao,Yu Bai,Jiucun Chen,Liangliang Tian,Syed Shoaib Ahmad Shah,Shu-juan Bao

DOI: https://doi.org/10.1016/j.electacta.2022.140671

IF: 6.6

2022-08-20

Electrochimica Acta

Abstract:The insufficient intrinsic activity and electrical conductivity of transition metal-based catalysts still inhibits their practical application. In this work, carbon-coated nano-Ni-armed Mo2N nanosheets (Ni@C-Mo2N) assembled on Ni Foam (NF) by using CDs-NH2 as reaction inducing and welding reagent. In-depth experiments reveal that the functional groups of (CDs) play a decisive role in regulating the phase composition and hierarchical structure of the final hybrid material. As electrocatalysts for hydrogen evolution reaction (HER), the optimized hierarchical Ni@C-Mo2N/NF achieved a very low overpotential of 38 mV at 10 mA cm−2 and outstanding stability of over 60 h, which should from the synergistic interfacial effect among the Ni, Mo2N and graphitic carbon optimized the electronic structure of catalyst with enhanced active sites, and improved electrical conductivity. This work provides novel insights for constructing more hierarchical multicomponent materials with the help of variable functional groups of CDs for further electrochemical applications.

electrochemistry
Nickel nanoparticles coated with graphene layers as efficient co-catalyst for photocatalytic hydrogen evolution

Li Jun Fang,Xue Lu Wang,Yu Hang Li,Peng Fei Liu,Yu Lei Wang,Hui Dan Zeng,Hua Gui Yang

DOI: https://doi.org/10.1016/j.apcatb.2016.07.033

2017-01-01

Abstract:•Nickel Nanoparticles wrapped up by graphene layers (Ni@C) has been prepared complicated processes.•Ni@C can function as a platinum-like co-catalyst for photocatalytic hydrogen evolution.•Graphene layers played an essential role in catalytic reaction, such as forming intimate contact with g-C3N4.•This work open up new insights to improve photocatalytic performance by architecturally designing new co-catalysts.
2D/2d-Ni–co–b/rgo Nanolayers Prepared by Galvanic Replacement for Hydrogen Generation Through NaBH4 Hydrolysis

Mengtian Shi,Yongjiang Hou,Xiaohan Du,Jie Guo,Bo Li,Yixuan Li

DOI: https://doi.org/10.1021/acsanm.3c00515

IF: 6.14

2023-01-01

ACS Applied Nano Materials

Abstract:While non-precious metals like Co and Ni have shown good performance in generating hydrogen from NaBH4, the challenges of catalyst agglomeration and deactivation have become a focus of future research. To address this issue, in this study, Co nanoparticles on graphene carriers and controllably replaced with nickel atoms to form highly dispersed two-dimensional (2D)/2D Ni-Co nanolayers by Galvanic Replacement Reaction were prepared. Characterization analyses (transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and hydrogen temperature programmed desorption (H2 TPD)) suggested that 2D/2D Ni- Co nanolayer catalysts were observed with ultrathin nanolayer structures after using graphene as a carrier. In the hydrogen generation process, the Ni atoms as the main active centers, combined with the synergistic effect of Co and the good conductivity of graphene, contribute to improved hydrogen release. The 2D material showed good hydrogen generation performance, with a rate of 4300 mL center dot(min center dot g)-1, maintenance of 94% hydrogen generating activity after five cycles, and lower activation energy of 29 kJ center dot mol-1.
Synthesis of “needle-cluster” NiCo2O4 carbon nanofibers and loading of Co-B nanoparticles for hydrogen production through the hydrolysis of NaBH4

Feiyan Yang,Yongjin Zou,Cuili Xiang,Fen Xu,Lixian Sun

DOI: https://doi.org/10.1016/j.jallcom.2022.165069

IF: 6.2

2022-08-01

Journal of Alloys and Compounds

Abstract:Hydrogen production through chemical processes has received considerable attention. Replacing precious-metal-based catalysts in NaBH4 hydrolysis entails challenges such as the low durability and efficiency of non-precious metals. Here, carbon nanofiber (CNF)-supported NiCo2O4 and CoB were synthesized to form a burr-shaped rod-like catalyst (CNF-NiCo2O4-CoB). The morphology and microstructure of the catalyst were characterized through scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller adsorption analysis. Then, NaBH4 hydrolysis was catalyzed using CNF-NiCo2O4-CoB. At 303 K, the hydrogen production rate and activation energy of the hydrolysis reaction were 5225 mL min−1 g−1 and 38.32 kJ mol−1, respectively. The maximum hydrogen production rate achieved using this composite catalyst was significantly higher than that of a pure CoB catalyst. The composite catalyst also exhibited high durability, maintaining 82.5% of its initial catalytic activity even after nine hydrolysis cycles. The magnetic nature of the catalyst improved its recyclability. This work provides a new method for synthesizing composite-structured catalysts, exhibiting considerable potential in the hydrolysis of NaBH4.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Hydrothermal Hydrolyzation-Driven Topological Transformation of Ni-Co Bimetallic Compounds with Hollow Nanoflower Structure for Optimizing Hydrogen Evolution Catalysis

Bingrong Xu,Mengting Duan,Kuan Shen,Xingmei Guo,Xinran Yang,Mingming Zhang,Bincheng Yue,Mengjia Zhang,Junhao Zhang,Zhong Jin

DOI: https://doi.org/10.1021/acsami.4c02566

IF: 9.5

2024-01-01

ACS Applied Materials & Interfaces

Abstract:Composition screening and structure optimization are two critical factors in improving the electrocatalytic performance of hybrid materials. Herein, we present a straightforward hydrothermal hydrolyzation-topological transformation strategy for the synthesis of a range of Ni-Co bimetallic compounds with a hollow nanoflower structure. Among these Ni-Co compounds, Ni2P/Co2P hollow nanoflowers (HNFs) exhibit the most impressive electrocatalytic activity for the hydrogen evolution reaction (HER), necessitating only an 153 mV overpotential to achieve a current density of 10 mA cm-2 under alkaline conditions. Importantly, this performance remains stable for over 48 h, indicating exceptional durability. The exceptional catalytic performance of Ni2P/Co2P HNFs arises from the synergy between the hybrid Ni2P/Co2P components and the hollow nanoflower structure. The former provides abundant catalytic sites, while electron rearrangement at the heterointerfaces enhances the adsorption/desorption of active species and facilitates electron transfer. The latter contributes to the exposure of catalytic sites, shortening mass and charge transfer routes, and bolstering structural stability during prolonged electrocatalysis. This research offers valuable insights into the screening and optimization of advanced hybrid electrocatalysts, holding significant promise for applications in the emerging field of new energy technologies.
CuNi alloy nanoparticles embedded in N-doped carbon framework for electrocatalytic reduction of CO2 to CO

Tiantian Yang,Wenke Xie,Na Tian,Xuan-He Liu,Xing Zhang

DOI: https://doi.org/10.1016/j.jallcom.2022.164042

IF: 6.2

2022-05-01

Journal of Alloys and Compounds

Abstract:Electrochemical conversion of CO2 into renewable fuel offers a promising approach to address the rising greenhouse gas accumulation in the atmosphere. The exploration of low-cost and efficient electrocatalysts with high selectivity is of great importance for development of electrochemical CO2 reduction (ECO2R). Here, we presented a CuNi alloy catalyst embedded in the N-doped carbon framework (CuNi/NC) derived from a metal-organic framework (Cu/Ni/Zn-MOF). The optimized Cu0.543Ni1/NC achieved high Faraday efficiency of CO (>90%) in the wide potential range of − 0.3 V to − 0.8 V. The maximum efficiency of CO was 99.7% at − 0.6 V. This study provided a strategy to construct non-precious metal electrocatalysts with high CO selectivity in wide potential range.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering

NiCo Bimetallic Nanoparticles Encapsulated in Graphite-Like Carbon Layers As Efficient and Robust Hydrogenation Catalysts

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Co-modified Ni/N-doped Carbon As Electrocatalysts for HER and OER

Nickel–platinum Nanoparticles Immobilized on Graphitic Carbon Nitride As Highly Efficient Catalyst for Hydrogen Release from Hydrous Hydrazine

NiCoP/CoP Nanoparticles Supported on Ti<sub>4</sub>O<sub>7</sub> as the Electrocatalyst Possessing an Excellent Catalytic Performance toward the Hydrogen Evolution Reaction

NiCoP/CoP nanoparticles supported on Ti4O7 as the electrocatalyst possessing an excellent catalytic performance toward hydrogen evolution reaction

NiCo Nanoalloy Encapsulated in Graphene Layers for Improving Hydrogen Storage Properties of LiAlH 4

Synthesis of Mesoporous Silica-Supported NiCo Bimetallic Nanocatalysts and Their Enhanced Catalytic Hydrogenation Performance

Nitrogen-coordinated Cobalt Nanocrystals for Oxidative Dehydrogenation and Hydrogenation of N-heterocycles

Porous N-Doped Carbon-Encapsulated CoNi Alloy Nanoparticles Derived from MOFs As Efficient Bifunctional Oxygen Electrocatalysts.

Graphitic carbon nitride supported Ni-Co dual-atom catalysts beyond Ni 1 (Co 1 ) single-atom catalysts for hydrogen production: A density functional theory study

Nitrogen-doped mesoporous carbon-armored cobalt nanoparticles as efficient hydrogen evolving electrocatalysts.

2D/2D-Ni–Co–B/rGO Nanolayers Prepared by Galvanic Replacement for Hydrogen Generation through NaBH 4 Hydrolysis

Structural and electronic engineering of Co‐doped Ni3C nanoparticles encapsulated in ultrathin carbon layers for hydrogen evolution reaction

Encapsulated Ni Nanoparticles in the Incomplete Graphite Layer Anchored on NiMo Oxides Enabling Superior Hydrogen Evolution to Pt

Carbon dots-induced carbon-coated Ni and Mo2N nanosheets for efficient hydrogen production

Nickel nanoparticles coated with graphene layers as efficient co-catalyst for photocatalytic hydrogen evolution

2D/2d-Ni–co–b/rgo Nanolayers Prepared by Galvanic Replacement for Hydrogen Generation Through NaBH4 Hydrolysis

Synthesis of “needle-cluster” NiCo2O4 carbon nanofibers and loading of Co-B nanoparticles for hydrogen production through the hydrolysis of NaBH4

Hydrothermal Hydrolyzation-Driven Topological Transformation of Ni-Co Bimetallic Compounds with Hollow Nanoflower Structure for Optimizing Hydrogen Evolution Catalysis

CuNi alloy nanoparticles embedded in N-doped carbon framework for electrocatalytic reduction of CO2 to CO