Abstract:The comprehensive performance of sine wavy fin in plate-fin heat exchangers (PFHEs) is numerically studied based on fluid structure interaction (FSI) analysis in this paper. The analysis results of stress distribution reveal that the highest stress is located in the inlet and outlet region of fin structure, and the fluctuant stress reaches to the peak in the wave crest. By way of analyzing Full 2nd-Order Polynomial response surface (RS), the effects of inlet velocity and five configuration parameters (fin height, fin space, fin thickness, fin wavelength and double amplitude) on heat transfer, flow resistance and stress of sine wavy fin structure are quantitatively assessed. The results reveal that the j factor increases with the increase of fin space and fin height, and decreases with the increase of fin thickness, wavelength and inlet velocity. The j factor firstly increases with the increase of double amplitude and then decreases. The f factor increases with double amplitude, fin space and fin height, and decreases with fin thickness, wavelength and inlet velocity. The maximum stress increases with the increase of wavelength and fin space, and decreases with the increase of fin thickness and double amplitude. The interaction effects of input parameters on the j factor and f factor are not obvious. While the interaction effects of fin thickness and wavelength, double amplitude and wavelength on the maximum stress are obvious. Based on RS, Multi-objective Genetic Algorithm (MOGA) is performed to optimize the fin structure comprehensively, with multiple objectives of increasing the JF factor (JF = j/f(1/3)) and decreasing the maximum stress to the best. The optimization results shows that, compared with the original design, the JF factor of optimal design 1, 2, and 3 increases by 11.0%, 8.4% and 15.9% respectively, and the maximum stress decreases by 32.3%, 42.4% and 20.7% respectively. (C) 2018 Elsevier Ltd. All rights reserved.

Analytical Evaluation of the Homogenized Elastic Constants of Plate-Fin Structures

Mechanics Model and Stress Analysis of Rectangular Vessel with Internal Fins

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

A Semi-Analytical Method to Evaluate the Dynamic Response of Functionally Graded Plates Subjected to Underwater Shock

Inelastic stress analysis of pressurized rectangular passage with multiple internal fins

METHOD FOR STRESS ANALYSIS OF THE CHANNEL-PLATE STRUCTURE

Sensitivity and Stress Analysis of Serrated Fin Structure in Plate-Fin Heat Exchanger on Cryogenic Condition

Multi-Objective Optimization of Serrated Fin in Plate-Fin Heat Exchanger by Fluid Structure Interaction

Influencing factors analysis in structural strength of plate-fin heat exchanger

Multi-parameter Optimization of Serrated Fins in Plate-Fin Heat Exchanger Based on Fluid-Structure Interaction

Creep-fatigue strength design of plate-fin heat exchanger by a homogeneous method

Application of Homogenization Theory in Study on Tube-Sheet

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Mechanical analysis of finned special-shaped tubes in bending-torsional coupling deformation

Optimization Investigation on Configuration Parameters of Sine Wavy Fin in Plate-Fin Heat Exchanger Based on Fluid Structure Interaction Analysis

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

Study on Performance Comparison of Different Fin Combinations of Catalyst Filled Plate Fin Heat Exchanger for Hydrogen Liquefaction

Performance Evaluation of Heat Transfer Enhancement for Offset Strip Fins Used in Plate-Fin Heat Exchangers

Fatigue Life Prediction of A Stainless Steel Plate-Fin Structure Using Equivalent-Homogeneous-Solid Method