Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

No-Load Magnetic Field Distribution in Axial Flux Permanent Magnet Machine with Static Eccentricity

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Unbalanced Magnetic Force Prediction in Permanent Magnet Machines with Rotor Eccentricity by Improved Superposition Method

Electromagnetic performance of interior permanent magnet machines with eccentricity

An Accurate No-Load Analytical Model of Flat Linear Permanent Magnet Synchronous Machine Accounting for End Effects

Quasi-3-D Analytical Method of Open-Circuit Magnetic Field for Yokeless and Segmented Armature Machine

Unbalanced Magnetic Force In Permanent Magnet Machines Having Asymmetric Windings And Static/Rotating Eccentricities

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Performance Analysis of Asymmetric-Excited Flux Reversal Permanent Magnet Linear Machines

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Analytical Solution of Magnetic Field Distribution in Brushless Permanent Magnet Machines With Rotor Axis Deflection

Analysis of the Flux Density and Back EMF in Eccentric Permanent Magnet Machines Based on 2-D Air-Gap Modulation Theory

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Subdomain Model For Predicting Magnetic Field In Slotted Surface Mounted Permanent-Magnet Machines With Rotor Eccentricity

Investigation of Postdemagnetization Unbalanced Magnetic Force in PM Machines Considering Short-Circuit Faults

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Eccentric position diagnosis of static eccentricity fault of external rotor permanent magnet synchronous motor as an in‐wheel motor