Abstract:This present paper is focused on the study of the evaluation of the effluent chemical oxygen demand(COD) and nitrogen(N) based on the activated sludge model No.1(ASM1) through comparing the results with the modeling of traditional activated sludge processes.As is known,membrane bioreactors(MBRs) are attracting the whole global interest in water and sewage treatment because of its advantage of producing highly qualified effluent that can meet the commonly needed water quality regulations.However,due to the intrinsic complexity and instability of MBR processes,basic models are needed to provide a holistic understanding of the technology at a fundamental level and then compare the results of the treatment with the modeling of traditional activated sludge processes.The experimental results of our evaluation demonstrate that the influent COD and N in traditional Chinese medicine sewage proves quite different from that of domestic sewage.When compared with the experimental research and development,due to the commercialization of the technology,modeling studies for system design analysis and performance prediction are at a relatively rudimentary state.However,mathematical modeling of the biological performance of MBRs remains very limited in use,which has made us conduct a test in a membrane bioreactor(MBR) to treat high-strength traditional Chinese medicine(TCM) wastewater from two-phase anaerobic digest effluent.The experimental results we have gained demonstrate that the influent COD and N of traditional Chinese medicine wastewater were different to that of domestic sewage.The experimental results also demonstrate that readily biodegradable substrate(SS) proves 141.2 mg/L,with its slowly biodegradable substrate(XS) being 2 113.2 mg/L,particulate(XI) material being 85.3 mg/L,and soluble(SI) material ─ 53.8 mg/L.In addition,ammonia nitrogen(SNH) in the medicine was 20.93 mg/L,nitrate nitrogen(SNO) was 0.5 mg/L,soluble biodegradable organic nitrogen(SND) was 17.6 mg/L,particulate biodegradable organic nitrogen(XND) was 263.4 mg/L.COD and nitrogen(N) evaluation was input of ASM1 and its validity of evaluation was correlative to simulation results of ASM1.Thus,COD and N evaluation tends to be very important to the ASM1 model.Moreover,evaluation of COD and N may have the oriented and referential function for the similar sewage.And,therefore,it proves a real need to develop a model to predict and simulate the effluent COD quality and the process of membrane blocking.

Modeling and Simulation of a Biological Process for Treating Different COD:N Ratio Wastewater Using an Extended ASM1 Model

Modeling and simulation of an extended ASM2d model for the treatment of wastewater under different COD: N ratio

Modeling and simulation of the biological process for treating wastewater with a low COD:N ratio under different dissolved oxygen conditions using an extended ASM2d model

Simulating a Cyclic Activated Sludge System by Employing a Modified ASM3 Model for Wastewater Treatment.

Modeling the Effect of External Carbon Source Addition under Different Electron Acceptor Conditions in Biological Nutrient Removal Activated Sludge Systems

[Modeling and Dynamic Simulation of the Multimode Anaerobic/anoxic/aerobic Wastewater Treatment Process].

Simulation and Optimization of a Coking Wastewater Biological Treatment Process by Activated Sludge Models (ASM)

Activated Sludge Model Based COD Fractionation in Wastewater Characterization

Simulation and performance evaluation of the anoxic/anaerobic/aerobic process for biological nutrient removal

Simulation Of Nitrogen And Phosphorus Removal In Amon Integrative Reactor By Activated Sludge Model 2d

Optimization of biological nitrogen removal in full-scale municipal WWTPs using activated sludge model simulation

Optimization of AmOn Integrative Nutrients Removal Reactor Based on Numerical Simulation

Development of a mechanistic model for biological nutrient removal activated sludge systems and application to a full-scale WWTP

Modeling EGSB-BAF process capable of biological nitrogen removal and methanogenesis

Mathematical Simulating the Process of Aerobic Granular Sludge Treating High Carbon and Nitrogen Concentration Wastewater

Optimization of A<inf>m</inf>O<inf>n</inf> Integrative Nutrients Removal Reactor Based on Numerical Simulation

The ASM2d model with two-step nitrification can better simulate biological nutrient removal systems enriched with complete ammonia oxidizing bacteria (comammox Nitrospira )

Development of Mechanistically Based Model for Simulating Soluble Microbial Products Generation in an Aerated/non-Aerated SBR

Modeling and Simulation of the Industrial Sequencing Batch Reactor Wastewater Treatment Process for Cleaner Production in Pulp and Paper Mills

On the Evaluation of the Sewage-Contaminated COD and N in Traditional Chinese Medicine Based on the Activated Sludge Model No.1

Modeling And Particular Application Of Asm2d Model For Describing Organic Matter And Nutrient Removal In A Novel Anaerobic-Anoxic/Oxiceight-Phased System