Abstract:A hydrophilic membrane commonly performs better in resisting fouling. But most prevailing polymeric membrane materials are hydrophobic thus prone to be fouled in practical operations. The current study presents a facile strategy for the fabrication of superhydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes on the basis of a blending method and a dip-coating technique. A carboxyl-rich substance was firstly blended as an additive in the PVDF membrane matrix during fabrication. The incorporated carboxyl groups acted as anchor sites for the subsequent binding of amine-grafted silica nanoparticles (NPs). After a simple dip-coating operation, the PVDF membrane would be covalently functionalized to be superhydrophilic. Three types of carboxyl-rich additives including poly(methacrylic acid sodium salt), sodium alginate, and ethylenediaminetetraacetic acid (EDTA) were separately used to prepare different primary membranes for respective functionalization operations. The resultant membranes were systematically characterized in terms of hydrophilicity, morphology, permeability, and antifouling performance. Consequently, the simple dip-coating functionalization dramatically enhanced the surface hydrophilicity of all the additive-blended PVDF membranes. All the functionalized membranes obtained a significantly lower initial contact angle, which instantly reduced to < 5 degrees within several seconds. This could be attributed to the hydrophilic chains grafted on the NPs and the proper micro-/nano topography offered by the stack of NPs. Particularly, the EDTA-blended membranes achieved a higher and more stable hydrophilicity. Also, all the functionalized membranes obtained higher water permeabilities as compared with the pristine membrane. Moreover, all the superhydrophilic membranes restored over 80% flux (much higher than the similar to 53% for the pristine membrane) after cleaning in the fouling tests, demonstrating dramatically enhanced antifouling capacity.

Facile Fabrication and Application of Superhydrophilic Stainless Steel Hollow Fiber Microfiltration Membranes

Fabrication of a Novel Superhydrophobic and Superoleophilic Surface by One-Step Electrodeposition Method for Continuous Oil/water Separation

A FACILE WAY TO PREPARE A SPONGE/CELLULOSE FIBER COMPOSITE AND ITS APPLICATION IN OIL/WATER SEPARATION

One-step in-situ fabrication of carbon nanotube/stainless steel mesh membrane with excellent anti-fouling properties for effective gravity-driven filtration of oil-in-water emulsions

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Ni-Al Layered Double Hydroxides (ldhs) Coated Superhydrophobic Mesh with Flower-Like Hierarchical Structure for Oil/water Separation

Fabrication of a superhydrophilic/underwater superoleophobic stainless steel mesh for oil/water separation with ultrahigh flux

Preparation of Underwater Superoleophobic Membranes Via TiO2 Electrostatic Self-Assembly for Separation of Stratified Oil/water Mixtures and Emulsions

A Facile Approach to Fabrication of Superhydrophilic Ultrafiltration Membranes with Surface-Tailored Nanoparticles

Synthesis of Si-Based High-Efficiency and High-Durability Superhydrophilic-Underwater Superoleophobic Membrane of Oil–Water Separation

Antioil-Fouling Superoleophobic-Superhydrophilic Nanofibrous Membranes for Separation of Immiscible Oil–Water Mixtures and Emulsions

Fabrication of Durable Superhydrophobic Stainless Steel Mesh with Nano/Micro Flower-Like Morphologies for Self-Cleaning and Efficient Oil/Water Separation

Fabrication of a robust superhydrophobic stainless steel mesh for efficient oil/water separation

A rapid two-step process to prepare a high-throughput, efficient, reusable superhydrophobic–superoleophilic stainless steel mesh for oil/water separation

Fabrication and Oil/Water Separation Performance of a Chemical Resistant Superhydrophobic Mesh

Fabrication of superhydrophilic and underwater superoleophobic membranes for fast and effective oil/water separation with excellent durability

One-Step Fabrication of a Micro/Nanosphere-Coordinated Dual Stimulus-Responsive Nanofibrous Membrane for Intelligent Antifouling and Ultrahigh Permeability of Viscous Water-in-Oil Emulsions.

Superhydrophilic and underwater superoleophobic cement-coated mesh for oil/water separation by gravity

Facile Fabrication of Superhydrophobic Filtration Fabric with Honeycomb Structures for the Separation of Water and Oil

Fabrication of Highly Durable and Robust Superhydrophobic-Superoleophilic Nanofibrous Membranes Based on a Fluorine-Free System for Efficient Oil/water Separation

Cubic MOF coated stainless steel mesh with underwater superoleophobicity for highly efficient oil/water separation