Abstract:Metal/polymer reactive materials have been studied and applied in a wide range of ways in recent years. This type of material is insensitive under normal conditions but reacts violently and releases a large amount of chemical energy under high-speed impact or high strain rate loading conditions. Compared with conventional explosives, it has better mechanical properties, and its unit mass energy is several times that of TNT. In this paper, PTFE/Al/CuO reactive materials are the main research objects, and we assess the impact energy release abilities of this type of reactive material through experimental research. To this end, eight sets of material formulations are designed, and the effects of particle size, the ratio of PTFE/Al and Al/CuO materials, and sintering on the energy release ability of the reactive materials are investigated. All experiments are carried out based on a self-designed new energy release testing device. The experimental device can measure the pressure time history curve generated by the reactive materials, and the rationality of the pressure time history curve can also be verified by the displacement time curve of the piston. The results show that with an increase in the Al/CuO thermite content, the energy release rate of the reactive material clearly increases, which is attributed to the reaction threshold of Al/CuO being low and because the heat generated can promote the reaction of PTFE/Al. The energy release rate of the nano-scale reactive materials is higher than that of the micron-scale reactive materials because the reduction in particle size results in a larger specific surface area. Thus, the energy required for ignition is lower. The energy release rate of sintered reactive materials is higher than that of unsintered reactive materials, which can be explained by the interfacial area between Al particles and PTFE particles in sintered reactive materials being larger, which makes the reaction more sufficient. The self-designed energy release testing device for the reactive materials and the conclusions obtained in this paper have clear significance for guiding engineering applications.

Measurement of the Heat of Reaction of Polytetrafluoroethylene/Aluminum Composites Based on Laser Initiation

Initial response and combustion behavior of microscale Al/PTFE energetic material by nanosecond laser ignition

Reactivity and reaction mechanism of Al-PTFE mechanically activated energetic composites

Flammability of Heat Transfer Fluid Aerosols Produced by Electrospray Measured by Laser Diffraction Analysis

Experimental study and simulation of the reaction mechanism of Al–PTFE mechanically activated energetic composites

An approach to distinguish chemical and kinetic energy of reactive materials: PTFE/LiF as an inert substitute to PTFE/Al

Research on the Impact Initiation Behavior of PTFE/Al/Ni2O3 Reactive Materials.

Impact Energy Release Characteristics of PTFE/Al/CuO Reactive Materials Measured by a New Energy Release Testing Device

Shock-induced chemical reaction characteristics of PTFE-Al-Bi2O3 reactive materials

Investigation of the shock compression behaviors of Al/PTFE composites with experimental and a 3D mesoscale-model

Quantitative Measurement of Transfer Film Thickness of PTFE Based Composites by Infrared Spectroscopy

Thermal Data of Perfluorinated Carboxylic Acid Functionalized Aluminum Nanoparticles

Development and Performance Analysis of an Atomic Layer Thermopile Sensor for Composite Heat Flux Testing in an Explosive Environment

Investigation on the microstructures, mechanical properties and impact initiation characteristics of Al/PTFE reactive materials reinforced by TiH 2 particles

Preparation of Al@FTCS/P(VDF-HFP) Composite Energetic Materials and Their Reaction Properties

Challenging the paradigm for reactive material's ignition from shear to pressure: Thermomechanical study of Al-PTFE

Evolutionary characteristics of infrared temperature field and micro analysis for Al/PTFE reactive materials in cook-off experiment

High speed 2-dimensional temperature measurements of nanothermite composites: Probing thermal vs. Gas generation effects

Investigation of temperature field for the in-situ fabrication of particle-reinforced alumina ceramics coating via laser induction

An approach to the induced reaction mechanism of the combustion of the nano-Al/PVDF composite particles

Mechanism of Pyrolysis Reaction of Al-Rich Al/PTFE/TiH2 Active Material