Abstract:Forward osmosis (FO) has drawn wide attention as a promising method to address world-wide water crisis due to the advantages of low-energy consumption and easy separation operation. Unfortunately, the trade-off between permeability and selectivity as well as membrane fouling hindered the application of forward osmosis. Surface modification is a feasible method to address these issues. However, there is a lack of systematic evaluation about the effect of modification position on FO performance due to the asymmetric structure of thin film composite (TFC) FO membrane. To provide new insights into the design of FO membrane with satisfied permeability and fouling resistance, novel TFC FO membranes were fabricated by introducing polydopamine (PDA) on the support layer (TFC-I) or active layer (TFC-S), respectively. The surface morphology, chemical composition and wettability of the fabricated membrane were studied. It was found that the surface wettability of the modified membrane was improved greatly compared to pristine TFC membrane (TFC-C). Moreover, TFC-S membrane displayed a rougher surface than that of TFC-I membrane. As a result, a superior TFC-S membrane with a water flux of 60.95 +/- 3.15 L m(-2) h(-1) in AL-DS mode was obtained, which was 72.61% and 17.87% higher than that of TFC-C and TFC-I membrane, respectively. In addition, the TFC-S membrane also presented an excellent fouling resistance and membrane regeneration performance during the three organic fouling cycle experiments. The results indicated that the introduction of PDA as a surface coating for TFC membranes modification guaranteed the high-performance and fouling resistance. Especially, the PDA coating on the support layer surface resulted in an enhancement in permeability, while both the permeability and anti-fouling performance were significantly improved with the PDA coating on the polyamide active layer surface. This study provides new insights into the development of modification TFC-FO membranes for practical applications in water treatment.

Surface functionalization of TFC FO membranes with zwitterionic polymers: Improvement of antifouling and salt-responsive cleaning properties

In Situ Surface Modification of Thin Film Composite Forward Osmosis Membranes with Sulfonated Poly(Arylene Ether Sulfone) for Anti-Fouling in Emulsified Oil/Water Separation

Investigation of Cleaning Strategies for an Antifouling Thin-Film Composite Forward Osmosis Membrane for Treatment of Polymer-Flooding Produced Water

A novel salt-responsive TFC RO membrane having superior antifouling and easy-cleaning properties

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Antifouling Thin-Film Composite Membranes by Controlled Architecture of Zwitterionic Polymer Brush Layer

Zwitterionic Surface Modification of Forward Osmosis Membranes Using N-aminoethyl Piperazine Propane Sulfonate for Grey Water Treatment

Antifouling thin-film composite membranes with multi-defense properties by controllably constructing amphiphilic diblock copolymer brush layer

In Situ Surface Chemical Modification of Thin-Film Composite Forward Osmosis Membranes for Enhanced Organic Fouling Resistance

Designing a multifunctional TFC membrane with improved permeability and anti-biofouling performance using zwitterionic, quaternary ammonium, and fluorinated materials

Surface modification on thin-film composite reverse osmosis membrane by cation complexation for antifouling

High-performance Thin-Film Composite Membranes with Surface Functionalization by Organic Phosphonic Acids

Insights into the Impact of Polydopamine Modification on Permeability and Anti-Fouling Performance of Forward Osmosis Membrane.

Thin Film Composite Forward Osmosis Membranes Based on Polydopamine Modified Polysulfone Substrates with Enhancements in Both Water Flux and Salt Rejection

Antifouling Double-Skinned Forward Osmosis Membranes by Constructing Zwitterionic Brush-Decorated MWCNT Ultrathin Films

Investigation of Forward Osmosis Performance and Anti-fouling Properties of the Novel Hydrophilic Polymer Brush-grafted TFC-type FO membranes: Investigation of Forward Osmosis Performance and Anti-fouling Properties of the Novel Hydrophilic Polymer Brush-grafted TFC-type FO membranes

In situ engineering of an ultrathin polyamphoteric layer on polyketone-based thin film composite forward osmosis membrane for comprehensive anti-fouling performance

Improving antifouling performance of FO membrane by surface immobilization of silver nanoparticles based on a tannic acid: diethylenetriamine precursor layer for municipal wastewater treatment

Enhancing water permeability and antifouling performance of thin–film composite membrane by tailoring the support layer

Fouling Mechanism of Forward Osmosis Membrane in Domestic Wastewater Concentration: Role of Substrate Structures

A “Like-Zwitterionic” Forward Osmosis Membranes with Electrostatic Deposition of Aluminosilicate Nanotubes for Resisting Positively and Negatively Charged Protein and Oil Contaminant