Abstract:A series of borate-based porous polymer electrolytes (B-PPEs) is prepared by incorporating the copolymers containing cyclic boroxine and cyclic carbonate groups into poly(vinylidene fluoride) (PVDF) through the phase inversion method. The dense and well-interconnected pores are obtained in the polymer matrix when the content of the copolymer reached 40 wt %. The ethylene–oxygen chain segments in the copolymer can facilitate the mobility of polymer chains and form the uniform distribution of pores in the B-PPEs. The B-PPEs show an enhanced ionic conductivity of 1.32 × 10–3 S cm–1 at 30 °C, which is due to the uniform well-interconnected pores in the polymer host. The cyclic carbonate units interact with the liquid electrolyte, which could improve the electrolyte uptake capacity of the polymer matrix. Benefited from the Lewis acid–base interactions between boron moieties and the anions of the lithium salt, the lithium-ion transference number of B-PPEs is also significantly improved. Compared to the pure PVDF-based electrolyte, the Li/B-PPEs/Li cell displays a very stable polarization voltage and the long-time cycling for 1000 h at a current density of 0.2 mA cm–2. Moreover, the Li/B-PPEs/LiFePO4 cells deliver a higher capacity of 143.0 mAh g–1 at 0.2 C and 86% capacity retention after 150 cycles. The B-PPEs could be a promising candidate for enhancing the safety and electrochemical properties of lithium metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01724.XRD images of B-PPEs with different contents of poly(B-Vd); temperature dependence of ionic conductivity for poly(B-PEGMA)-based GPE, poly(B-Vd) and poly(B-Vd)/PVDF-based SPE; surface morphology of Li metal after cycling in Li/B-PPE0/Li and Li/B-PPE40/Li cells; charge and discharge curves of the B-PPE0-based Li/LFP cell under a current density of 0.2 C at 30 °C; and SEM image of the surface of B-PPE40 after cycling in the Li/B-PPE40/LFP cell (PDF)This article has not yet been cited by other publications.

Poly(butylene Terephthalate)-B-poly(ethylene Oxide) Alternating Multiblock Copolymers: Synthesis and Application in Solid Polymer Electrolytes

PEO-Based Block Copolymer Electrolytes Containing Double Conductive Phases with Improved Mechanical and Electrochemical Properties

Simultaneous Improvement of Ionic Conductivity and Mechanical Strength in Block Copolymer Electrolytes with Double Conductive Nanophases.

Poly(ethylene oxide)- and Polyzwitterion-Based Thermoplastic Elastomers for Solid Electrolytes

PEO composite solid polymer electrolytes with the synergistic effect of cryogenic engineering and trace BP nanosheets for nearly room temperature and 4 V Class all-solid-state lithium batteries

Solid Polymer Electrolytes Based On Cross-Linked Polybenzoxazine Possessing Poly(Ethylene Oxide) Segments Enhancing Cycling Performance Of Lithium Metal Batteries

Vertical channel‐structured cyanoethylated bacterial cellulose/polyethylene oxide composite solid electrolyte for all‐solid‐state lithium batteries

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

Fabrication of Borate-Based Porous Polymer Electrolytes Containing Cyclic Carbonate for High-Performance Lithium Metal Batteries

Highly Conductive Polyoxanorbornene‐Based Polymer Electrolyte for Lithium‐Metal Batteries

Phenylboronic Acid Functionalized Calix[4]pyrrole‐based Solid‐State Supramolecular Electrolyte

Crosslinked Poly(tetrahydrofuran) as a Loosely Coordinating Polymer Electrolyte

Polybenzimidazole-reinforced polyethylene oxide-based polymer-in-salt electrolytes enabling excellent structural stability and superior electrochemical performance for lithium metal batteries

Crosslinked polytetrahydrofuran-based solid-state electrolytes with improved mechanical stability and electrochemical performance

Boronic Ester Transesterification Accelerates Ion Conduction for Comb-like Solid Polymer Electrolytes

Solid Polymer Electrolytes Regulated by Ion-Dipole Interactions for High Voltage Lithium Batteries

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Poly(β‐amino ester) based solid polymer electrolytes for lithium‐ion batteries

Bifunctional Solid-State Copolymer Electrolyte with Stabilized Interphase for High-Performance Lithium Metal Battery in a Wide Temperature Range

Tailored PEO/PEG-PPG Polymer Electrolyte for Solid-State Lithium-Ion Battery

Poly(vinyl benzoate)-b-poly(diallyldimethyl ammonium TFSI)-b-poly(vinyl benzoate) Triblock Copolymer Electrolytes for Sodium Batteries