Abstract:The microstructure, morphology and composition highly determine the corrosion resistance and bioactivity of coating. In traditional cathodic electrodeposition process, because of the unfavorable effects of the polarization of concentration difference and H2 evolution, fluorine-doped hydroxyapatite coating was loose and porous. This coating could not ensure the long-term stability of the Mg alloy implants. In order to improve the corrosion resistance and bioactivity of coating, pulse electrodeposition and H2O2 were introduced into the electrodeposition to deposit fluorine-doped hydroxyapatite coating. As a comparative study, microstructure, corrosion resistance properties and bioactivity of traditional cathodic electrodeposition coating and pulse electrodeposition coating were investigated, respectively. The results revealed that nano fluorine-doped hydroxyapatite coating could be prepared by pulse electrodeposition, and the coating was dense and uniform. The potentiodynamic polarization experiment indicated that the dense and uniform coating could effectively protect Mg alloy substrate from corrosion. Immersion testing was performed in simulated body fluid. It was found that pulse electrodeposition coating could more effectively induce the precipitation of Mg2+, Ca2+ and PO43− in comparison with traditional cathodic electrodeposition coating, because the nano phase had comparatively high specific surface area. Thus magnesium alloy coated with fluorine-doped nano-hydroxyapatite coating may be a promising candidate as biodegradable bone implants, and was worthwhile to further investigate the in vivo degradation behavior.

Corrosion Behavior of Cathodic Electrodeposition Coatings on Micro-Arc Oxidized Titanium Alloy in Simulated Body Fluid

Effect of Supersaturation on the Morphology of Hydroxyapatite Crystals Deposited by Electrochemical Deposition on Titanium

Formation Mechanism and Corrosion Properties of Bioactive Coating on a Micro-Arc Oxidized Ti6Al4V Using Cathodic Electrodeposition

Formation and in Vitro Mineralization of Electrochemically Deposited Coatings Prepared on Micro-Arc Oxidized Titanium Alloy

Influence of Electrolytes on the Microstructure of Microarc Oxidation Coatings on Ti—6Al—4V Alloy

Microstructure Evolution and Corrosion Mechanism of Dicalcium Phosphate Dihydrate Coating on Magnesium Alloy in Simulated Body Fluid

Self-adjustment of calcium phosphate coating on micro-arc oxidized magnesium and its influence on the corrosion behaviour in simulated body fluids

Growth, Microstructure and Mechanical Properties of Microarc Oxidation Coatings on Titanium Alloy in Phosphate-Containing Solution

Corrosion behavior of TiO2 films on Mg-Zn alloy in simulated body fluid

Electrodeposition Technique for Calcium Phosphate Bioceramic Coatings on Ti6Al4V Substrate

Corrosion Behviour of Micro-Arc Oxidized Titanium in NaCl Solution with H2O2 and Albumin

Synthesis and characterization of hydroxyapatite coatings with superior performance for corrosion protection of Ti-6Al-4V alloy in simulated bodily fluid

Formation Mechanism of Calcium Phosphate Coating on a Plasma Electrolytic Oxidized Magnesium and Its Corrosion Behavior in Simulated Body Fluids

Electron transfer kinetics and corrosion resistance of electrodeposited composit coating on titanium alloy

Effect of Electrodeposition Modes on Surface Characteristics and Corrosion Properties of Fluorine-Doped Hydroxyapatite Coatings on Mg–Zn–Ca Alloy

Composition and Bioactivity of Calcium Phosphate Coatings on Anodic Oxide Nanotubes Formed on Pure Ti and Ti-6Al-4V Alloy Substrates.

Morphology and Corrosion Resistance of Hydroxyapatite Coatings Formed on Commercially Pure Titanium

Structure and corrosion resistance of electrochemical deposition coatings on magnesium alloy coated by ultrasonic micro-arc oxidation in simulated body fluid

Effects of Voltage on the Characteristics and Corrosion Resistance of Microarc Oxidation Coatings on Ti6al4v Alloy

Biocompatibility and Corrosion Protection Behaviour of Hydroxyapatite Sol-Gel-Derived Coatings on Ti6Al4V Alloy

Characterization and Corrosion Evaluation of Tio2:N-Ha Coatings on Titanium Alloy Formed by Plasma Electrolytic Oxidation