Abstract:The development of lithium-ion batteries (LIBs) possessing the satisfactory capacity and energy density is critical for many new energy applications,such as portable electronics and electric vehicles (EVs).Although the current LIBs have demonstrated substantial success in widespread applications and commercialization,challenges still exist in situations that require high rate charge/ discharge processes and have high risk in serving as power resource of EVs and hybrid EVs.Commercial anode materials have been dominated by graphite for nearly 20 years,however,owing to the low working voltage of graphite (0.2 V vs.Li+/Li),they suffer from potential safety issues of dendritic lithium formation and side reactions caused by the solid electrolyte interphase (SEI) layer on its surface.Hence,a new anode material with appropriate working voltage and high energy density simultaneously will be desirable.Li3VO4 (LVO) has been known as an excellent ion conduction material and optical material for many years,and it has demonstrated great potential as anode material of LIBs as well.Compared to Li4Ti5O12 and graphite,LVO,an intercalation type material,has an appropriate and safe working voltage range (0.5-1.0 V vs.Li+/Li),which prevents the high risk of graphite and the sacrifice of energy density and overall battery voltage.Meanwhile,LVO experiences small volume change during lithiation/ delithiation process and possesses a relatively high theoretical capacity of 400 (mA · h)/g,corresponding to two lithium ions intercalated in LVO and shifted to Li3+xVO4 (x=2).Nonetheless,the practical use of LVO still faces an obstacle,the low electrical conductivity.In this paper,in order to improve its capacity and rate performance,Li3VO4/RGO nanocomposites with three-dimension network structures were successfully prepared by drying method.The primary Li3VO4 particle's diameter is about 50-200 nm and dispersed on the surfaces of RGO nanosheets uniformly.After calcination at temperature of 600 ℃,the typical samples showed excellent electrochemical performance.Li3VO4/RGO-600 electrode achieved a high discharge specific capacity of 495.6 (mA · h)/g at 0.5 C and maintained 365.9 (mA · h)/g after 100 cycles;Even at a high current density of 10 C,it still delivered a superior capacity of 332.9 (mA · h)/g.

Progress on Li3VO4 as a Promising Anode Material for Li-ion Batteries: Li3VO4 As Anode Material

Progress on Li3VO4 as a Promising Anode Material for Li‐ion Batteries

Vanadate-Based Materials for Li-Ion Batteries: The Search for Anodes for Practical Applications

Vanadate‐Based Materials for Li‐Ion Batteries: the Search for Anodes for Practical Applications

Development and Perspective of the Insertion Anode Li3VO4 for Lithium-Ion Batteries

Electrochemical Characteristics of Lithium Vanadate, Li3VO4 As a New Sort of Anode Material for Li-ion Batteries

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

Recent advances in LiV3O8 as anode material for aqueous lithium-ion batteries: Syntheses, modifications, and perspectives

An elaborate insight of lithiation behavior of V2O5 anode

A Li 3 VO 4 micro/nanoscale anode with fast ion transportation for advanced lithium-ion batteries: a mini-review

Research Progresses on Vanadium-Based Polyanion-Type Compounds Electrode Materials for lithium-Ion Batteries

Preparation and Electrochemical Performance of Li3VO4/Reduced Graphene Oxide Nanocomposite Anode Material

Li3VO4: A Promising Insertion Anode Material for Lithium‐Ion Batteries

Revitalized interest in vanadium pentoxide as cathode material for lithium-ion batteries and beyond

Recent Progress in Li-rich Layered Oxides As Cathode Materials for Li-ion Batteries

Agitation drying synthesis of porous carbon supported Li3VO4 as advanced anode material for lithium-ion batteries

Lithium Vanadium Oxide/Graphene Composite As a Promising Anode for Lithium-Ion Batteries.

Surface-Amorphous and Oxygen-Deficient Li 3 VO 4- δ as a Promising Anode Material for Lithium-Ion Batteries.

Preparation and Characterization of Iron-Doped Li 3VO 4 As Anode Material for Lithium-Ion Batteries

Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries

MV3O8 (M = Li+, Na+, NH4+) as Novel Intercalated Materials for Li-Ion Batteries