Abstract:In microfiltration processes for drinking water treatment, one method of removing trace contaminants is to add powdered activated carbon (PAC). Recently, a version of PAC called superfine PAC (S-PAC) has been under development. S-PAC has a smaller particle size and thus faster adsorption kinetics than conventionally sized PAC. Membrane coating performance of various S-PAC samples was evaluated by measuring adsorption of atrazine, a model micropollutant. S-PACs were created in-house from PACs of three different materials: coal, wood, and coconut shell. Milling time was varied to produce S-PACs pulverized with different amounts of energy. These had different particles sizes, but other properties (e.g. oxygen content), also differed. In pure water the coal based S-PACs showed superior atrazine adsorption; all milled carbons had over 90% removal while the PAC had only 45% removal. With addition of calcium and/or NOM, removal rates decreased, but milled carbons still removed more atrazine than PAC. Oxygen content and specific external surface area (both of which increased with longer milling times) were the most significant predictors of atrazine removal. S-PAC coatings resulted in loss of filtration flux compared to an uncoated membrane and smaller particles caused more flux decline than larger particles; however, the data suggest that NOM fouling is still more of a concern than S-PAC fouling. The addition of calcium improved the flux, especially for the longer-milled carbons. Overall the data show that when milling S-PAC with different levels of energy there is a tradeoff: smaller particles adsorb contaminants better, but cause greater flux decline. Fortunately, an acceptable balance may be possible; for example, in these experiments the coal-based S-PAC after 30 min of milling achieved a fairly high atrazine removal (overall 80%) with a fairly low flux reduction (under 30%) even in the presence of NOM. This suggests that relatively short duration (low energy) milling is viable for creating useful S-PAC materials applied in tandem with microfiltration.

Assessing Pre-Adsorption Time Impact on Ultrafiltration Performance for Surface Water Treatment

The role of PAC adsorption-catalytic oxidation in the ultrafiltration performance for treating natural water: Efficiency improvement, fouling mitigation and mechanisms

Investigation of Pre-Coagulation and Powder Activate Carbon Adsorption on Ultrafiltration Membrane Fouling

Effect of Peroxymonosulfate Oxidation Activated by Powdered Activated Carbon for Mitigating Ultrafiltration Membrane Fouling Caused by Different Natural Organic Matter Fractions.

Effect of Powdered Activated Carbon on Immersed Hollow Fiber Ultrafiltration Membrane Fouling Caused by Particles and Natural Organic Matter

Improved Ultrafiltration Performance Through Dielectric Barrier Discharge/sulfite Pretreatment: Effects of Water Matrices and Mechanistic Insights

PAC-UF Process Improving Surface Water Treatment: PAC Effects and Membrane Fouling Mechanism

Controlling ultrafiltration membrane fouling in surface water treatment via combined pretreatment of O3 and PAC: Mechanism investigation on impacts of technological sequence

Combined effects of coagulation and adsorption on ultrafiltration membrane fouling control and subsequent disinfection in drinking water treatment

Pre-depositing versus mixing powdered activated carbons for gravity-driven membrane systems during treated domestic wastewater filtration: Permeability stabilization and removal performance

Effect of adsorption/coagulation on membrane fouling in microfiltration process post-treating anaerobic digestion effluent

Enhanced performance and mechanism of adsorption pretreatment for alleviating membrane fouling in AGMBR: Impact of structural variations in carbon adsorbents

Removal of algae and algogenic odor compounds via combined pre-chlorination and powdered activated carbon adsorption for source water pretreatment

Superfine powdered activated carbon (S-PAC) coatings on microfiltration membranes: Effects of milling time on contaminant removal and flux

Influence on Organics Removal Effect of Ultrafiltration by Various Pretreatment Process

Analyses of Molecular Weight Distribution of Organic Matters with Pre-Oxidation and PAC–UF Pretreatment Before Seawater Reverse Osmosis

Effects of powdered activated carbon on the coagulation-flocculation process in humic acid and humic acid-kaolin water treatment

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Reversible and irreversible membrane fouling in hollow-fiber UF membranes filtering surface water: effects of ozone/powdered activated carbon treatment

Purification of Micro Polluted Surface Water and Study on Membrane Fouling by PAC-UF Process

Influence of powdered activated carbon on the membrane filtration performance