Abstract:The preparation of traditional organic-inorganic lead-halogen hybrid perovskite solar cells often requires strict nitrogen glove box conditions, thus hindering their industrial scalability. This study develops a large-area perovskite film formation process and designs a novel device structure to achieve a dual enhancement of module device efficiency and stability in a high humidity air environment (55%). High-quality perovskite thin films are successfully prepared by vacuum extraction in ambient air, followed by a double-end low-temperature photopolymerization process utilizing acrylate monomer molecules for inner encapsulation modification of the freshly formed perovskite thin films. The influences of these techniques on the photoelectric characteristics of perovskite thin films and devices are investigated. The results indicate that uniform and dense perovskite films can be achieved in ambient air with a pumping time of 60 s. By adjusting the concentration of ethylene glycol dimethacrylate monomer molecules used in the low-temperature photopolymerization process, the surface defects on the perovskite film can be effectively controlled. The optimal concentration of 1 mg/mL results in perovskite film with optimal morphology and fluorescence intensity. Furthermore, rigid module device and flexible module device (effective area: 18 cm²), based on the polymer inner encapsulation, demonstrate outstanding outdoor photoelectric conversion efficiencies of 19.51% and 18.17%, respectively (with the highest indoor low-light conversion efficiencies of 34.5% and 30.2%, respectively). Notably, the untreated flexible device exhibits a significant decline in photoelectric conversion efficiency, falling below 50% of the initial value after one month of exposure to air. In contrast, device incorporating the polymer inner encapsulation layer maintains over 90% of their original efficiency, highlighting their excellent humidity resistance stability. Moreover, the polymer encapsulation layer also greatly improves the bending stability of the flexible device. This research paves the way for industrial-scale producing perovskite solar cells and addressing the challenges associated with humidity and large-area fabrication. The findings contribute to advancing perovskite solar cell technology and offering a pathway for high-efficiency and stable devices suitable for practical applications.

An Isopropanol-Assisted Fabrication Strategy of Pinhole-Free Perovskite Films in Air for Efficient and Stable Planar Perovskite Solar Cells

Facile and Scalable Fabrication of Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells in Air Using Gas Pump Method

Green Low-Temperature-solution-processed in Situ HI Modified TiO2/SnO2 Bilayer for Efficient and Stable Planar Perovskite Solar Cells Build at Ambient Air Conditions

Enhanced Optoelectronic Quality of Perovskite Films with Excess CH3NH3I for High-Efficiency Solar Cells in Ambient Air

Approximately 800-Nm-thick Pinhole-Free Perovskite Films Via Facile Solvent Retarding Process for Efficient Planar Solar Cells

A NH4F Interface Passivation Strategy to Produce Air-Processed High-Performance Planar Perovskite Solar Cells

A Strategy Toward Air-Stable and High-Performance ZnO-based Perovskite Solar Cells Fabricated under Ambient Conditions

Inhibition of Halide Oxidation and Deprotonation of Organic Cations with Dimethylammonium Formate for Air-Processed P–i–n Perovskite Solar Cells

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Highly Efficient and Stable Planar Perovskite Solar Cells with Modulated Diffusion Passivation Toward High Power Conversion Efficiency and Ultrahigh Fill Factor

Efficient and Stable CH3NH3PbI3-x(SCN)x Planar Perovskite Solar Cells Fabricated in Ambient Air with Low-Temperature Process

Air‐Processed Perovskite Films with Inner‐to‐Outside Passivation for High‐Efficiency Solar Cells

Controllable Perovskite Crystallization at a Gas-Solid Interface for Hole Conductor-Free Solar Cells with Steady Power Conversion Efficiency over 10%.

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non‐Halide Engineering

Preparation and Optoelectronic Characteristics of Perovskite Module Devices in Air Assisted by Polymer Inner Packaging Layern

Air-Induced High-Quality Ch3nh3pbi3 Thin Film for Efficient Planar Heterojunction Perovskite Solar Cells

Preparing High-Efficiency Perovskite Solar Cells

High Efficient Planar-heterojunction Perovskite Solar Cell Based on Two-step Deposition Process

Fabrication of planar heterojunction perovskite solar cells

High Performance Planar Perovskite Solar Cells Based on CH3NH3PbI3-x(SCN)x Perovskite Film and SnO2 Electron Transport Layer Prepared in Ambient Air with 70% Humility

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell