Abstract:Lock-in thermography which is an active thermography technique for NDT is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. Phase angle images obtained by superposition of the initial thermal wave and its internal reflection display hidden thermal structures down to a certain depth below surface. Defects are found by comparing the observed features with expected features provided by an intact reference sample. This technique has been widely applied to detect the defection of many materials and structure in aerospace and automotive industry. In this study, the law of sine modulated lamp was used for active heat source into the CFRP plate sample. The theory of thermal wave transmission and reflection were studied deeply by finite difference method and thermal-electronic equaling model. The thermal wave image sequences were collected with infrared camera, and the program of IR Lock-in thermography was developed by Visual C++ development platform. So that the phase image was extracted between the reflection thermal wave and reference ones on the surface of sample by means of correlation algorithms or Fourier transform. The experimental results show that the simulation is closed to the experimental ones. The defect character is detected clearly, and the relation between phase and defect depth is obtained by lock-in thermography, this relation can be used to measure the defect depth. Lock-in thermography is an effective tool to detect the Debonding defect of CFRP materials.

Nondestructive Testing for Multi-Layer Metal-Metal Bonded Structure by Using Inductive Lock-In Thermograhy

Feasibility study of debonding NDT for multi-layer metal-metal bonding structure by using eddy current pulsed thermography

Periodic Pulsed Thermography for Inner Defects Detection of Lead-Steel Bonded Structure

Infrared nondestructive testing technology for multilayer metal structures

Debonding Defect Detection by Applying Pulsed, Lock-in and Linear Frequency Modulation Thermal Excitation Methods in the Inspection of Fiber-Reinforced Metal Laminates

Simultaneous inspection of multi-kind defects in adhesively bonded CFRP/steel structures by inductive thermography

Non-destructive Evaluation of Thermal Barrier Coating Structures Using Multi-Physics Fusion Based on Electromagnetic Drive

Non-destructive Inspection of Carbon-Fibre-reinforced Polymers Using Lock-in Thermography

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

Non-destructive Testing of Debonding Defects in Thermal Barrier Coating System Using Laser Infrared Thermography

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Fusion Model of Inductive Thermography and Ultrasound for Nondestructive Testing

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

Experimental Study on Debonding Defects Detection in Thermal Barrier Coating Structure Using Infrared Lock-in Thermographic Technique

Subsurface Interfacial Defects of Metal Materials Testing Using Ultrasound Infrared Lock-In Thermography

Linear laser fast scanning thermography NDT for artificial disbond defects in thermal barrier coatings.

Quantitative Detection of Defect Using Ultrasound Infrared Lock-In Thermography

Internal Defect Detection of Multilayer Dissimilar Metal Based on Pulse Eddy Current

Lock-in Thermography for Evaluation of Destruction Area and Determination of Depth

Non-destructive Testing of Airfoil Based on Infrared Lock-in Thermography

Hybrid RFEC and Transmission NDT for Detection of Lead-Steel Multilayers