Moisture and Aging Degree Evaluation Method for Oil-Paper Insulation Based on HV-FDS Characteristics Analysis
Shilin Shi,Jian Hao,Qian Zeng,Fanghui Yin,Ruijin Liao
DOI: https://doi.org/10.1109/tdei.2024.3394401
IF: 2.509
2024-01-01
IEEE Transactions on Dielectrics and Electrical Insulation
Abstract:Oil-paper insulation is the "heart" of power transformer, and frequency-domain spectroscopy (FDS) is an efficient method to evaluate the insulation state of it. Nevertheless, traditional FDS test voltage is still at 200 V, and the insulation characteristics of FDS at high voltage (HV) levels are worth exploring. Therefore, this article studies the FDS characteristics of oil-paper insulation at various test voltages and proposed an evaluation method of moisture and aging degree of oil-immersed pressboard based on HV FDS. The results show that with the increase of test voltage, the C ' of mineral oil increases from 1 mHz to 10 Hz, while oil-immersed pressboard and "liquid-solid" oil-paper insulation decrease below 10 Hz; tan delta of all samples increases significantly with the increase of test voltage. The tan delta value at 0.1, 1, and 10 Hz is selected as a characteristic parameter to evaluate the moisture content of oil-immersed pressboard, tan delta at HV is more sensitive to moisture content compared with that at low voltage, and tan delta at 0.1 Hz and 7000 V increases 1130 times compared 75 times at 0.1 Hz and 200 V. The integral of tan delta , S-tan delta , from 0.1 to 10 Hz is selected as parameters to evaluate the aging degree. The oil-immersed pressboard and distribution transformer are tested and evaluated by the above evaluation method, and the results show that the error of moisture content and aging degree evaluation result is less than 10%.