Abstract:Torque ripples of permanent magnet synchronous motor (PMSM) will degrade the torque performance of PMSM drive systems in high-performance applications and are one of the sources of vibration and noise. To reduce torque ripples, one of the solutions is to inject harmonic currents into stator windings, so that extra torque ripples are generated to compensate for the original ones. To obtain the optimal harmonic current solutions, torque ripple model (TRM) and speed harmonics are commonly used in optimization. However, the performance of TRM based methods in torque ripple reduction is limited due to the accuracy of the PMSM TRM model and motor parameters. Also, the speed harmonic based methods have speed limitations, since the speed harmonics caused by torque ripples will be filtered out by the inertia of the drive systems when the motor is operated over the cut-off frequency. Therefore, one torque ripple reduction method with no motor parameters involved and with no speed limitations needs to be discussed and proposed. In this paper, the response surface torque ripple model for PMSM drives is first established based on the measurements of speed harmonics. Based on the response surface torque ripple model, the motor-parameter-free solution of optimal harmonic currents is analytically derived for torque ripple reduction with minimal motor loss. The proposed method is verified by experimental results, which demonstrate that the proposed method can reduce torque ripples of PMSM drives effectively without prior knowledge of any motor parameters and can also avoid the limitation of speed operations.

Practical Testing Solutions to Optimal Stator Harmonic Current Design for PMSM Torque Ripple Minimization Using Speed Harmonics

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Harmonic Current Optimization for Torque Ripple Reduction in Permanent Magnet Synchronous Machine Drives Based on Torque Ripple Surrogate Model

Torque Ripple Reduction Method for Permanent Magnet Synchronous Machine Drives With Novel Harmonic Current Control

Motor-Parameter-Free Solution of Optimal Harmonic Currents for Torque Ripple Reduction of PMSM Drives with Response Surface Method

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Optimal Current Modeling and Identification for Fast and Efficient Torque Ripple Minimization of PMSM Using Theoretical and Experimental Models

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine with an Advanced Step-Skewed Rotor Design.

Torque Ripple Reduction of Permanent Magnet Synchronous Machine Drives with Tangential Vibration Acceleration Control

Strategy and Implementation of Harmonic-Reduced Synchronous Optimal PWM for High Speed PMSM

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Deadbeat Harmonic Current Control of Permanent Magnet Synchronous Machine Drives for Torque Ripple Reduction

Synchronous Optimal Torque PWM with Low Torque Ripple under Low Carrier Ratio

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Torque Ripple Minimization of the Permanent Magnet Synchronous Machine by Modulation of the Phase Currents

Torque Ripple Reduction Method for Interior Permanent Magnet Synchronous Machine Drives with Minimal Loss