Theoretical Study on Composite Bars of Basalt Fiber

Xiao-Chu Wang,Tian-Shi Rong,Liu Xiao

DOI: https://doi.org/10.12783/dtmse/icmsea/mce2017/10853

2017-01-01

Abstract:This paper introduces the current development of basalt fiber, this paper expounds the made of basalt fiber composite reinforced by basalt fiber, used to advantage in the field of civil engineering, and process and the main use of present domestic and foreign research.

What problem does this paper attempt to address?

Basic Development Length Of Basalt Fiber Reinforced Plastic Bar In Engineered Cementitious Composite

Hai-Long Wang,Qi-Ming Ying,Yue-Jing Luo,Xiao-Yan Sun

2015-01-01

Abstract:In order to develop a good performance composite structure, the bond behaviour between the basalt fibre reinforced plastic (BFRP) bar and the engineered cementitious composite (ECC) was experimental studied in this paper through the pullout tests. It is found that the BFRP bar has a good bond capacity with the ECC matrix, and the sufficient length to anchor the 4mm BFRP bar in ECC should be larger than 15d. On basis of the equilibrium equation of forces, the basic development length was calculated and further compared with the available models for FRP bars in concrete. The comparison shows that the models for FRP bars in concrete can also be used to calculate the basic development length of BFRP bar in ECC, whereas they are slightly conservative.
Properties and Applications of Basalt Fiber and Its Composites

Zongwen Li,Jianxun Ma,Hongmin Ma,Xin Xu

DOI: https://doi.org/10.1088/1755-1315/186/2/012052

2018-01-01

IOP Conference Series Earth and Environmental Science

Abstract:Basalt fiber is a green, healthy and environmentally friendly high-tech fiber product without environmental pollution. It is widely used in military and civilian fields. It is not only of great theoretical significance but also of great strategic significance to strengthen the analysis and study of the properties of basalt fiber and its composite materials. The results show that: compared with glass fiber, carbon fiber and aramid fiber, basalt fiber has good mechanical properties, acid-alkali resistance, excellent electrical properties, high wave permeability, non-conductive, and excellent sound insulation and insulation performance. Based on the above advantages, the combination of basalt fiber and substrate can enhance the material properties. Based on the above features, the basalt fiber and its composites can be made into high temperature and low temperature protective clothing and sound insulation materials used in sound absorption and heat insulation industry. Its production can also be widely used in the fields of brake, electric, electromagnetic and so on for its unique features.
Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

Hao Zhou,Bin Jia,Hui Huang,Yanling Mou

DOI: https://doi.org/10.3390/ma13061362

IF: 3.4

2020-03-17

Materials

Abstract:Blending a certain proportion of basalt fiber into concrete improves the toughness of concrete, which prevents cracking and avoids the brittle behaviors. In this paper, the compressive, tensile, and flexural tests of concrete with different basalt fiber contents were carried out. Then the test phenomena, failure modes, and mechanical properties were compared and analyzed to derive the relationship between the basalt fiber contents and mechanical properties. The toughness and crack resistance performance of basalt fiber reinforced concrete were evaluated by the fracture energy, advanced toughness parameters, and characteristic length proposed by Hillerborg. The correlation coefficient of basalt fiber was introduced to establish the calculation formula for mechanical properties of basalt fiber reinforced concrete. The results indicated that basalt fiber significantly improved the toughness and crack resistance performance of concrete. The enhancing effect of the basalt fiber on the compressive strength of concrete is lower than that of tensile strength and flexural strength. Moreover, the improvement effect was the highest with the basalt fiber content was 0.3% and 0.4%.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Recent advances to engineer tough basalt fiber reinforced composites: A review

Changjie Chen,Yi Ding,Xinhou Wang,Limin Bao

DOI: https://doi.org/10.1002/pc.28711

IF: 5.2

2024-07-25

Polymer Composites

Abstract:Basalt fiber reinforced composites. Basalt fibers, known as "green materials without pollution in the 21st century", have gained widespread attention due to its good mechanical properties. Basalt fiber‐based composites have applications in various fields such as construction, transportation, energy, and protection. However, as an inorganic fiber material, basalt fiber is hard and brittle and prone to catastrophic failure, reducing the safety of the material. Therefore, it is important to strengthen the toughness of basalt fiber‐based composites. This paper reviews the contributions made by researchers in recent years to enhance the toughness of basalt fiber reinforced composites. It mainly focuses on four aspects: physical and chemical modification of fibers surface, mixed application of multiple fibers, different textile and 3D printing technology, and design of biomimetic structures. Through these methods, the toughness of basalt fiber‐reinforced composite materials was increased by 10%–90%. In today's advocacy for green industrial development, the research and application of basalt fibers are very important for advancing the process of green development. These contributions can promote the application of basalt fiber in engineering fields. Highlights Basalt fiber is a green material without pollution. Basalt fiber reinforced composites is the key material for engineering field. Strengthening interfacial adhesion can significantly improve the toughness of composites. Basalt fibers can serve as an alternative to glass fibers in composite materials. The hybridization of basalt fibers with soft fibers can effectively enhance the toughness of composites.

polymer science,materials science, composites
Experimental Research on Basalt Fiber Reinforced Cementitious Composites

jian xun ma,ming zhang,gang zhao

DOI: https://doi.org/10.4028/www.scientific.net/AMM.253-255.533

2013-01-01

Applied Mechanics and Materials

Abstract:Basalt fiber was added to the traditional cement-based materials to improve the physical and mechanical properties. The mixture ratio of the matrix, the basalt fiber content, and the super-plasticizer type as well as its contents were designed optimally. The fluidity test, axial compressive strength and cube compressive strength test, flexure strength test were carried out. The results show that the fluidity and the compressive strength of basalt fiber reinforced cementitious composite(BFRCC for short) reduces when the basalt fiber content increases, but the toughness of traditional cement-based materials is improved by adding basalt fiber.
Durability and fatigue performances of basalt fiber / epoxy reinforcing

L. Hui,G. Xian

2012-01-01

Abstract:As a promising alternative to conventional glassand carbonfiber reinforced polymer (FRP) composites used in structural strengthening, basalt fibers based FRPs have been developed and studied recently. In the current paper, durability and fatigue performances of a basalt fiber / epoxy FRP reinforcing bar were studied. The durability study was focused on hygrothermal and alkaline environments. The bare basalt fiber immersed in the above environments, without protection from resin, exhibits a serious degradation in the tensile properties, due to serious corrosion of the fibers as revealed by scanning electron microscopy. On the contrary, basalt fiber reinforcing bars show a much improved durability performance subjected to the same conditions. The service lives of the reinforcing bars are predicted in various environments according to Arrhenius equations. Fatigue performance of the basalt fiber reinforcing bar was investigated before and after ageing in alkaline solution. The fatigue life of aged samples was remarkably reduced compared to the control samples.
Research progress on basalt fiber-based functionalized composites

Wencan Tao,Bin Wang,Nuoxin Wang,Yifan Guo,Jinyang Li,Zuowan Zhou

DOI: https://doi.org/10.1515/rams-2022-0300

2023-01-01

REVIEWS ON ADVANCED MATERIALS SCIENCE

Abstract:Abstract Basalt fiber (BF) is a kind of high-performance fiber rising rapidly in recent years. BF is typically used in the field of structure engineering because of its high strength and high modulus. The preparation of BF-based composites first requires surface modification of BF to improve the interfacial bonding between BF and the resin matrix. With the continuous deepening of the research on BF surface modification, researchers have found that special surface modification can obtain BF-based functionalized composites, and this field has received extensive attention in recent years. In this article, research work on BF-based functional composites in recent years are summarized and reviewed from the aspects of electromagnetic shielding, water treatment, catalytic function and fire insulation. Finally, this article summarizes the BF surface modification methods, and proposes the development trends and direction of BF-based functional composites.

materials science, multidisciplinary,nanoscience & nanotechnology
The effect of basalt fiber addition on cement concrete: A review focused on basalt fiber shotcrete

Qianqian Liu,Pengfei Song,Lianwei Li,Yuzhong Wang,Xuhao Wang,Jian Fang

DOI: https://doi.org/10.3389/fmats.2022.1048228

2022-11-23

Frontiers in Materials

Abstract:Basalt fiber, as a natural silicate fiber, has excellent engineering performance in high and low temperature resistance, high fracture strength, toughness, shear and elastic modulus in nature. Shotcrete was widely used in tunnel lining, slope support, coal mine roadway and other projects. With the continuous development of shotcrete technology, scholars found that adding fiber to shotcrete would greatly improve the performance of shotcrete. Compared with traditional plain shotcrete and steel fiber shotcrete, shotcrete incorporated with basalt fiber can dramatically improve the bending resistance, toughness and durability, therefore effectively improving the engineering performance of concrete structure, such as lining support. This paper summarized and discussed the mechanical properties, early age performance, durability and practical applications of basalt fiber reinforced concrete with a focus on basalt fiber shotcrete (BFSC). Meanwhile, it focused on the engineering performance improvement and enhancement mechanisms of basalt fiber as a mineral admixture into shotcrete, and assessed the deficiencies existing in the current research. Eventually, the suggestions and prospects for future BFSC related research were proposed.

materials science, multidisciplinary
Study on Mechanical Properties of Basalt Fibers Superior to E-glass Fibers

Jianxun Liu,Meirong Chen,Jianping Yang,Zhishen Wu

DOI: https://doi.org/10.1080/15440478.2020.1764438

2020-05-18

Journal of Natural Fibers

Abstract:Both basalt fibers and glass fibers can be used as reinforced material in fiber-reinforced polymer (FRP) composites. In this paper, the tensile strength, elastic modulus, and hardness of basalt fibers and E-glass fibers are studied by fiber tensile tester and nanoindentation. The crystalline phase and structural feature of fibers are conducted by X-ray diffraction (XRD) and Fourier transform infra-red (FTIR) spectroscopy. The results show that the mechanical properties of basalt fibers are higher than those of E-glass fibers. The density of basalt glasses is higher than that of E-glass and increases with increasing iron content. XRD patterns show that both basalt fibers and E-glass fibers are totally amorphous. Fe<sup>3+</sup> mainly exists in the form of [FeO<sub>6</sub>] in the glass network. It indicates that iron oxide plays a key role in improving the mechanical properties of basalt fibers.

materials science, textiles
Finite Element Analysis of Composite Ribs of Basalt

Xiao-Chu Wang,Tian-Shi Rong,Xiao Liu

DOI: https://doi.org/10.12783/dtmse/icmsea/mce2017/10854

2017-01-01

Abstract:By finite element simulation of ABAQUS finite element method, the finite element model of the reinforced concrete beam and the basalt composite reinforcement beam is established, and the simulation analysis of the model is carried out by simulation. 1) Although there are errors in the simulation curve and test curve, the error range is 10% 15%, acceptable; 2) there is a need to improve technology, improve the process, to create a better non-stripping BFRP tendons. 3) under the same load, whether it is ABAQUS simulation results, or test the results obtained by the test, the beam deflection of the specimen are large With the continuous development of construction technology in recent years, the continuous development and utilization of building materials, people used in construction is not limited to the use of stone and wood, building construction for the eyes more and more focus on new materials. Prior to the early 20, in the field of structural construction is the most widely used reinforced concrete, the construction of the materials used are reinforced, cement and other common materials, these materials have been able to continue down, the most reason is that it of the durability, fire resistance.
Mechanical properties and failure mechanism analysis of basalt-glass fibers hybrid FRP composite bars

Gang Wu,Yuhang Ren,Jinbo Du,Hongguang Wang,Xin Zhang

DOI: https://doi.org/10.1016/j.cscm.2023.e02391

IF: 4.934

2023-08-15

Case Studies in Construction Materials

Abstract:In order to solve the defect of insufficient performance of the single fiber reinforced plastic (FRP) bars. The basalt fibers and glass fibers are prepared into the basalt-glass fibers hybrid FRP composite bars (B/G hybrid FRP bars) in this paper. The failure mechanism of basalt-glass fibers hybrid FRP composite bars is analyzed by the finite element method. The main failure factors include not only fiber breakage but also the separation of the interface between the two fibers. The mechanical properties of basalt-glass fibers hybrid FRP composite bars in the alkaline environment are predicted by simulation. The tensile properties, elongation properties, pseudo ductility stage length, and yield stress reduction of basalt-glass fibers hybrid FRP composite bars under different fiber volume ratios are investigated by tensile tests. The results show that when the volume ratio of glass fiber to basalt fiber is 7:3, the ultimate strain reaches 2.57%. When the volume ratio of glass fiber to basalt fiber is 9:1, the ultimate strain reaches 3.06%, with a difference of 0.49%. In addition, the yield stress reduction stage in basalt-glass fibers hybrid FRP composite bars is also affected by the volume ratio of hybrid fibers. When the volume ratio of glass fibers to basalt fibers is 9:1 and 7:3, the difference in ultimate tensile strength and the difference in yield stress reduction stage of the two are 185.85 MPa and 145.09 MPa, respectively. In addition, the optimal volume ratio range suitable for different situations is summarized in the study. When glass fiber accounts for 68.9–100% of the total integral number of basalt-glass fibers hybrid FRP composite bars, the tensile and extension properties of basalt-glass fibers hybrid FRP composite bars have different degrees of change.

construction & building technology,materials science, multidisciplinary,engineering, civil
MECHANICAL BEHAVIOR OF COMPOSITE BASALT SHORT FIBER FOR CONCRETE STRUCTURE REINFORCEMENT

Karunamoorthy Rengasamy Kannathasan,Andrejs Krasnikovs,Arthur Macanovskis,Iveta Novakova

DOI: https://doi.org/10.17770/etr2024vol3.8157

2024-06-22

ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference

Abstract:Interest to Fiber concrete - concrete reinforced with short randomly distributed in the material volume fibers is growing and obtaining more new fields of application. Initially used fibers were steel. Composite Fibers (CF) have become competitive with steel fibers, fiber concretes with such fibers are now under investigation. In the present research, authors investigated the bond strength between the fiber and concrete, as well as other mechanical characteristics of the fiber concrete with CF. CF were made of short basalt micro-fibers glued together by Epoxy resin. Basalt micro-fiber roving (250 filaments) was taken as a main source of the CF, it was impregnated with epoxy resin. The Epoxy resin to hardener ratio was 3:1. After a few days maturing prepared CF were cut down into short fibers of a size of 24 mm. The authors planned to prepare concrete samples for the single fiber pull-out test and composite fiber-reinforced concrete prisms for the four-point bending test. Another product used in the investigation was Oil Shale Ash (OSA). OSA is a class-C fly ash. OSA was used as a partial cement replacement in a concrete. The concrete mixture was prepared with different compositions in addition to Oil Shale Ash (was used OSA from Auvere, Estonia, thermal power plant) as replacement of cement in ratios of 0%, 10%, 20%, and 30%. Tests were performed to obtain the load-bearing capacity of a concrete with basalt fibers. An important property of every kind of fiber is the single fiber behavior under pull-out conditions. Microscopic analysis has been made to conclude the research.
Research Progress of Basalt Fiber Reinforced Polyimide Composites and Its Application in Electrical Insulating Fields

Jingang Liu,Xiumin Zhang,Weiwei Ren,Huan Li,Wangshu Tong,Yihe Zhang

DOI: https://doi.org/10.16790/j.cnki.1009-9239.im.2016.12.004

2016-01-01

Abstract:The development status of basalt fiber and high-temperature resistant polymer insulating materi-als were introduced, and the recent research progress of basalt fiber reinforced polyimide composites and their application in electrically insulating fields at home and abroad were reviewed. The characteristics, manufacturing process and surface modification technology of continuous basalt fibers and the develop-ment situation of their composites were emphatically presented.
Flexural Performance Study of Basalt-Fiber-Reinforced Polymer Bar Basalt-Fiber-Reinforced Concrete Beams

Kangjia Song,Yang Yu,Yutao Liu,Jichong Zhao

DOI: https://doi.org/10.3390/buildings13102583

IF: 3.324

2023-10-13

Buildings

Abstract:The utilization of Fiber-Reinforced Polymer (FRP) rods to strengthen concrete beam structures can enhance their ultimate load-carrying capacity and mitigate steel reinforcement corrosion damage. However, a prominent issue with BFRP (Basalt FRP) rod reinforcement in flexural members is its lack of yielding behavior, which can lead to catastrophic brittle failure without any preventive measures. Therefore, this study aims to enhance the ductility of concrete by introducing a specific quantity of basalt fiber, thereby reducing the hazards associated with the brittle failure of this composite structure. This experiment focuses on two main variables: the inclusion rate of basalt fiber and the type of longitudinal reinforcement and conducts four-point static bending tests on four BFRP bar BFRC (Basalt-Fiber-Reinforced Concrete) beams. Results showed that the inclusion of fibers resulted in a delayed initiation of vertical cracks and a reduction in the severity of beam failure, thereby enhancing structural safety and reliability. When the basalt fiber inclusion rate was 0.2%, the cracking load and ultimate load of the beam increased by 18.42% and 8.27%, respectively. Furthermore, compared to traditional RC beams, BFRP bar BFRC beams showed a 58.27% increase in ultimate load capacity. A cracking moment calculation model for BFRP beams is proposed and subsequently validated through the utilization of existing experimental data.

construction & building technology,engineering, civil
DURABILITY STUDY OF BASALT FIBER AND ITS FRP BARS

WU Jing-yu,XIAN Gui-jun,LI Hui

DOI: https://doi.org/10.3969/j.issn.1003-0999.2011.05.011

2011-01-01

Abstract:In the present study,continuous basalt fiber(BF) and basalt fiber reinforced polymer(BFRP) bars were investigated in their durability performances when subjected to water and alkaline solution.Immersion in water and alkaline solution at elevated temperatures led to remarkable etching of BF,and significant deterioration in the tensile strength of the dry fibers and BFRP bars.For BFRP bars,the tensile modulus was less affected relatively.For both BF and BFRP,alkaline solution shows more adverse effect on the depression of the tensile strength than water,especially at the elevated temperatures.
Properties of Basalt Fiber Core Rods and Their Application in Composite Cross Arms of a Power Distribution Network

Yunpeng Liu,Mingjia Zhang,Hechen Liu,Lin Tian,Jie Liu,Chuanfu Fu,Xiaotao Fu

DOI: https://doi.org/10.3390/polym14122443

IF: 5

2022-06-17

Polymers

Abstract:As basalt fiber has better mechanical properties and stability than glass fiber, cross arms made of continuous basalt-fiber-reinforced epoxy matrix composites are capable of meeting the mechanical requirements in the event of typhoons and broken lines in coastal areas, mountainous areas and other special areas. In this paper, continuous basalt-fiber-reinforced epoxy matrix composites were used to fabricate the core rods and composite cross arms. The results verified that basalt fiber composite cross arms can meet the strict requirements of transmission lines in terms of quality and reliability. In addition to high electrical insulation performance, the flexural modulus and the flexural strength of basalt fiber core rods are 1.8 and 1.06 times those of glass fiber core rods, respectively. Basalt fiber core rods were found to be much better load-bearing components compared to glass fiber core rods. However, the leakage current and the result of scanning electron microscopy (SEM) analysis reveal that the interface bonding strength between basalt fibers and the matrix resin is weak. A 3D reconstruction of micro-CT indicates that the volume of pores inside basalt fiber core rods accounts for 0.0048% of the total volume, which is greater than the 0.0042% of glass fiber rods. Therefore, improving the interface bond between basalt fibers and the resin can further improve the properties of basalt fiber core rods.

polymer science
Potential advantages of basalt FRP bars compared to carbon FRP bars & conventional steel

Mariam Zaki,Amira Tobaa,Ahmed Shehata,Farid Mohamed,Ramy Khalef,Yomna Hagras,Reem Abou-Ali,Mayer Farag,Athnasious Ghaly,Magdi Madi,Ezzeldin Sayed-Ahmed,Yosra El-Maghraby,Mohamed Abou-Zeid

DOI: https://doi.org/10.1080/14488353.2020.1816638

2020-09-12

Australian Journal of Civil Engineering

Abstract:In this study an attempt is taken to evaluate the performance of basalt FRP bars compared with carbon FRP bars and conventional steel bars. Specimens of reinforced concrete will be casted to fulfil this comparison. These beams will comprise a common top reinforcement, stirrups spacing, and concrete properties. The difference is in the bottom reinforcement where it was once steel, Carbon FRP, Basalt FRP, and a hybrid of Basalt FRP and steel. These beams were tested for their behaviour under a flexural load through a four-point bending test. The remaining specimens were casted as columns with common stirrups spacing, and concrete properties. The behaviour of Basalt FRP, Carbon FRP, and steel reinforcement will be tested upon the application of an axial compressive load. The bonding strength between concrete and the different candidate bars is tested through the bond pull-out test. Furthermore, tests will be conducted on the thermal, chemical, and mechanical properties of the individual bars. This study is expected to yield an evaluation of the main characteristics of the newly developed Basalt FRP bars and an identification of the key differences and limitations of using BFRP in concrete structures in relation to CRFP and traditional steel reinforcement of concrete structure.
State-Of-The Art and Practice of Concrete Structures Reinforced with Frp Bars

Zhang Lianzhen,Xiong Wei

DOI: https://doi.org/10.4028/www.scientific.net/aef.5.195

2012-01-01

Abstract:Fiber reinforced polymer (FRP) bars have been widely used in civil engineering used as a substitute for steel reinforcement because it has many advantage such as high strength, light weight and no corrosion. Moreover, the productive technology becomes more and more mature and industrialized so that FRP has become one economic and competitive structure material. Based on the recent researches, this paper mainly introduces progress in the studies on concrete structures reinforced with FRP bars. These contents in this paper include the bond performance of FRP bars in concrete, shear resistance, flexural behavior and ductility of concrete structure reinforced with FRP bars in the past few years in the world.
Basalt fiber and its composite manufacturing and applications: An overview

Ashokkumar R. Tavadi,Yuvaraja Naik,K. Kumaresan,N.I. Jamadar,C. Rajaravi

DOI: https://doi.org/10.4314/ijest.v13i4.6

2022-05-30

Abstract:Basalt fiber is a low cost materiel obtained from the Basalt rock from earth, and it can be divided into small pieces to form fiber. In this paper dealing with Basalt fiber manufacturing, property of composites and application are reviewed. The results indicate that as compared to glass fibers, carbon fibers and armide fiber, basalt fiber possesses excellent machine driven properties such as wave permeability, electrical properties, non-conductive and insulation properties. BFRP has higher flexural strength and better adhesion as related to CFRP and GFRP. When temperature increases thermal and mechanical properties of BFRP reduces considerable. Due to the above advantages, the addition of Basalt fiber and its composites can be used in sound and sound absorption and thermal insulation application.
DEVELOPMENT AND APPLICATION OF COMPOSITE IN CIVIL ENGINEERING

FENG Peng

DOI: https://doi.org/10.3969/j.issn.1003-0999.2014.09.013

2014-01-01

Abstract:Fiber reinforced polymer( FRP) materials are a relatively new material in civil and structural engineering,but due to their unique physical,chemical,and mechanical characteristics,they have gradually become an important part of the civil engineering materials toolkit. This paper surveys the use of FRP in structural reinforcement,cable elements,and prestressed concrete reinforcement,and discusses the development of FRP both in composite and pure-FRP structural applications. Furthermore,it highlights the development and present state of the various codes pertaining to the use of FRP in structural engineering in China with an eye towards encouraging better understanding and increased use of the material.

Theoretical Study on Composite Bars of Basalt Fiber

Basic Development Length Of Basalt Fiber Reinforced Plastic Bar In Engineered Cementitious Composite

Properties and Applications of Basalt Fiber and Its Composites

Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

Recent advances to engineer tough basalt fiber reinforced composites: A review

Experimental Research on Basalt Fiber Reinforced Cementitious Composites

Durability and fatigue performances of basalt fiber / epoxy reinforcing

Research progress on basalt fiber-based functionalized composites

The effect of basalt fiber addition on cement concrete: A review focused on basalt fiber shotcrete

Study on Mechanical Properties of Basalt Fibers Superior to E-glass Fibers

Finite Element Analysis of Composite Ribs of Basalt

Mechanical properties and failure mechanism analysis of basalt-glass fibers hybrid FRP composite bars

MECHANICAL BEHAVIOR OF COMPOSITE BASALT SHORT FIBER FOR CONCRETE STRUCTURE REINFORCEMENT

Research Progress of Basalt Fiber Reinforced Polyimide Composites and Its Application in Electrical Insulating Fields

Flexural Performance Study of Basalt-Fiber-Reinforced Polymer Bar Basalt-Fiber-Reinforced Concrete Beams

DURABILITY STUDY OF BASALT FIBER AND ITS FRP BARS

Properties of Basalt Fiber Core Rods and Their Application in Composite Cross Arms of a Power Distribution Network

Potential advantages of basalt FRP bars compared to carbon FRP bars & conventional steel

State-Of-The Art and Practice of Concrete Structures Reinforced with Frp Bars

Basalt fiber and its composite manufacturing and applications: An overview

DEVELOPMENT AND APPLICATION OF COMPOSITE IN CIVIL ENGINEERING