Abstract:Partially restrained connections comprise intricate systems of multiple components, each exhibiting varying degrees of performance degradation under fire conditions. Consequently, the damage patterns within these connections are reconfigured. Moreover, owing to the insulating effect of floor slabs, the thermal and mechanical states of remaining structures differ in hogging and sagging bending moment regions after removing critical members, thereby influencing the potential damage modes and collapse-resistant mechanisms. To elucidate this impact mechanism, a comprehensive analysis of the influence parameters on the failure mechanism and collapse-resistant action of a typical partially restrained connection (angle steel-bolted connection) steel frames exposed to fire was conducted based on multi-scale models. The results revealed that steel frame structures with different connection configurations all enter the compressive arching action (CAA) stage after the heating phase due to the thermal expansion behavior of beams. After the completion of load application, the deformations of all three connection models remain below 0.2 rad. The variation of beam load magnification factor α does not affect the structural failure mode, while a higher column load ratio causes the damage location to shift from the connection to the column under fire conditions and triggers a chain failure reaction. Compared to axial constraint k as , the rotational constraint k rs is a critical factor influencing the damage mode. The negative axial force generated by the thermal expansion behavior of the fire-affected region can enhance the flexural action resistance in the unheated region by employing the CAA. Finally, a theoretical method is proposed to predict the failure mechanism of steel frames with angle steel-bolted connections exposed to fire under progressive collapse condition, providing a novel approach for identifying weak components of similar structures and improving anti-collapse capabilities.

Simulations on Progressive Collapse Resistance of Steel Moment Frames under Localized Fire

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Collapse tests of RC frame with sudden middle column removal

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Dynamic progressive collapse of steel moment frames under different fire scenarios

Progressive Collapse Nonlinear Analysis on Composite Frames with CFST Columns Based on Static-dynamic Analytic Conversion Procedure in Fires

Experimental and numerical study on fire-induced collapse of unprotected steel framed structures

Numerical study on progressive collapse of a reinforced concrete frame subjected to travelling fire

Failure mechanism of steel frames with angle steel-bolted connections exposed to fire under progressive collapse condition

Component-based models of beam-column joints exposed to fire in steel framed structures against progressive collapse

NUMERICAL ANALYSIS OF FIRE?INDUCED PROGRESSIVE COLLAPSE OF A MULTI?STOREY REINFORCED CONCRETE FRAME

Numerical analysis for the fire-induced progressive collapse of a RC frame structure

Progressive collapse resistance of self-resilient composite frames under fire conditions

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

NUMERCIAL MODELS OF FIRE INDUCED PROGRESSIVE COLLAPSE ANALYSIS FOR REINFORCED CONCRETE FRAME STRUCTURES

Experimental and numerical study on collapse modes of single span steel portal frames under fire

PROGRESSIVE COLLAPSE SIMULATION OF A MULTI-STORY STEEL FRAME

Multilinear model for progressive collapse response of reinforced concrete frames under penultimate column removal scenario

Progressive collapse of steel structures exposed to fire: A critical review

Dynamic Analysis Method For Fire-Induced Progressive Collapse Of A Planar Rc Frame

NONLINEAR DYNAMIC PROGRESSIVE COLLAPSE ANALYSIS OF COMPOSITE FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS BASED ON FIBER MODEL