Abstract:In this paper, the depth and length of lateral subsurface cracks were gauged using laser-generated Rayleigh waves in the frequency domain. First, the frequency domain characteristics of reflected and transmitted Rayleigh waves after a laser-generated Rayleigh wave interacts with lateral subsurface cracks are investigated based on the finite element method (FEM). The simulation results reveal that there is a certain relationship between the center frequency of reflected and transmitted Rayleigh waves and crack size. The center frequency of the reflected Rayleigh wave decreases with increasing crack length but is independent of depth. When the crack length remains unchanged, the center frequency of the transmitted Rayleigh wave increases with increasing crack depth. Then, the quantitative relationships between the ratio of the crack length to the incident Rayleigh wavelength and the ratio of the reflected Rayleigh wave frequency to the incident Rayleigh wave frequency, the ratio of the crack depth to the incident Rayleigh wavelength and the ratio of the transmitted Rayleigh wave frequency to the incident Rayleigh wave frequency were obtained via multiple function fitting, and a method for the quantitative detection of the lateral subsurface crack depth and length was proposed. Finally, experimental and simulated data were used to validate the proposed relationships, and the results showed that the relative error of the measured crack length did not exceed 7.19% and that the relative error of the measured crack depth did not exceed 14.82%. The results show that the method has good application prospects for the quantitative measurement of lateral subsurface crack depth and length.

Research of Synthetic Aperture Focusing Technology in the Application of Crack Length Sizing by Time of Flight Diffraction Technique

The Inquiry of Improving Quantitative Accuracy of Flaw Length in TOFD Technique Based on SAFT

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Ultrasonic TOFD technique and image enhancement based on synthetin aperture rousing technique

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Weld Crack Testing Method Using Ultrasonic Tofd Technique

Ultrasonic TOFD Testing Model for Crack Measurement in Thick Wall Weldment

Quantitative Inspection of Small Size Cracks by TOFD Based on Autoregressive Spectral Extrapolation

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Resolution Enhancement in Ultrasonic TOFD Imaging by Combining Sparse Deconvolution and Synthetic Aperture Focusing Technique (Sparse-Saft)

Ultrasonic Rough Crack Characterization Using Time-of-Flight Diffraction With Self-Attention Neural Network

Finite Element Analysis of Laser-Generated Rayleigh Wave for Sizing Subsurface Crack in Frequency Domain

Research on Short Crack Simulation and CT Projection Acquisition Technique

In-situ Quantitative Monitoring of Fatigue Crack Using Fastest Time of Flight Diffraction Method

Defect detection using the phased-array laser ultrasonic crack diffraction enhancement method

Novel Approach to Enhancement of Ultrasonic Tofd B-Scan Image for Measurement of Weld Crack

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Time-domain Approach for Ultrasonic Non-destructive Detection Based on Synthetic Aperture Focusing Technique

Depth measurement of small surface-breaking cracks using the Half-Skip Total Focusing Method