Abstract:Many interesting wave manipulation devices, including illusion devices, have been proposed and realized by transformation optics. Using illusion devices, an object of arbitrary shape can be made to appear like another object. However, there are substantial limitations in current illusion devices based on transformation optics. Firstly, refractive index must be modulated over a large volume, thus, the dimension of current illusion devices cannot be small. Moreover, sophisticated three-dimensional structures are required and difficult to be fabricated. Here, a method to create arbitrary illusions using planar ultrathin metasurfaces is proposed, as shown in Figure 1. Figure 1(a) shows a surface with arbitrary shape, generated by the Peaks function in Matlab. The length and width of the Peaks surface are both 12λ and the height is between -0.5λ and 0.5λ, where λ is the free-space wavelength of our referenced frequency, 5.8 GHz. The Peaks surface in Figure 1(a) is pretended with a planar metasurface, as shown in Figure 1(b), by creating the similar field distribution. At the point on the planar metasurface corresponding to an arbitrary point on the Peaks surface with height h, the metasurface cell should recover the phase of the scattered wave. The incident wave at an oblique angle (θ, φ) at that point should scatter as if it were reflected by the Peaks surface The metasurface cell at that point should provide a phase shift φ = π+2k <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> h cos θ to compensate the phase difference between the Peaks surface and planar illusive metasurface. When the Peaks surface and the planar illusive metasurface are illuminated from z direction (θ = 0°) by a planar wave, the interferential electric fields of incident wave and reflective wave in z = λ plane are respectively shown in Figures 1(c) and (d), two similar distributions. Therefore, the Peaks surface in Figure 1(a) is successfully pretended by the planar illusive metasurface in Figure 1(b), which demonstrates that our method is feasible.

Creation of an Arbitrary Electromagnetic Illusion Using a Planar Ultrathin Metasurface

Creating Arbitrary Illusions By Planar Ultrathin Metasurfaces

A Reconfigurable Electromagnetic Metasurface with Bifunctional Illusions

Electromagnetic Illusion in Smart Environments

Fourier Metasurface Cloaking: Unidirectional Cloaking of Electrically Large Cylinder under Oblique Incidence.

Shaping Electromagnetic Fields with Irregular Metasurface

Creation of Ghost Illusions Using Metamaterials in Wave Dynamics

A Kirigami-Based Reconfigurable Metasurface for Selective Electromagnetic Transmission Modulation

Reconfigurable metasurface design with hallucination and stealth capabilities

Metasurface Synthesis with Arbitrary Incident Angles Using Planar Electric Impedance Surfaces

An Additively Manufactured Wide Angle and Broadband Electromagnetic Camouflage Metasurface

Planar Metamaterial Realization: from 3D Metamaterial to 2D Metasurface

Multiplexing Meta‐Illusion with High Correlation in Both Near‐ and Far‐Field Region

Wide-angle invisible dielectric metasurface driven by transverse Kerker scattering

In Situ Customized Illusion Enabled by Global Metasurface Reconstruction

Electromagnetic Beam Modulation and Planar Invisibility Cloak Through Transformation Optical Structures

Electromagnetic Metasurfaces: Physics and Applications

An Ultra-Thin Skin Cloak for Electromagnetic, Acoustic and Water Wave

Surface Impedance Synthesis Using Parallel Planar Electric Metasurfaces

2Π-Space Uniform-Backscattering Metasurfaces Enabled with Geometric Phase and Magnetic Resonance in Visible Light.