Abstract:Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) offer an alternative to traditional reinforced concrete columns for new construction applications due to their high strength, ductility, and corrosion resistance properties. Despite their popularity, there is a lack of accurate analytical models for the cyclic/seismic performance of CFFT columns. This is due to the absence of precise stress–strain models for FRP tubes and confined concrete under cyclic loading. Previous experiments on CFFT columns suggest that even minimal reinforcement (≤1%) provides essential energy dissipation for extreme events. However, existing stress–strain models for FRP-confined concrete often neglect the contribution of longitudinal and transverse steel reinforcement. While some researchers have proposed material models to address this issue, the analytical modeling of confinement effects from both steel reinforcement and FRP tubes, especially under lateral cyclic loading, continues to pose a significant challenge. This study aims to use previously collected experimental data to evaluate current analytical modeling approaches in OpenSeesPy3.5.1.12 to simulate the lateral cyclic behavior of CFFT columns with ±55° glass fiber-reinforced polymer (GFRP) fiber orientation. Both the lumped inelasticity and the distributed inelasticity modeling approaches are applied. The performance of various FRP confinement models is compared. The effect of plastic hinge length is also considered in the lumped plasticity approach. The findings suggest that integrating a fiber element section into the plastic hinge zone enhances the efficiency of the distributed inelasticity approach. This method accurately captures the non-linear behavior in the critical region and precisely predicts the shape of the hysteretic curve, all while reducing computational costs. Conversely, the lumped inelasticity modeling approach effectively forecasts energy dissipation and peak load values across the entire cyclic hysteresis curve, offering significant computational savings. Finally, a generalized modeling methodology for predicting the response of CFFTs under cyclic lateral load is proposed and subsequently validated using experimental results found in the existing literature.

Simulating the Lateral Performance of FRP-confined RC Circular Columns Using a New Eccentric-Based Stress-Strain Model

Theoretical Model for Slender FRP-confined Circular RC Columns

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Seismic Performance of Circular Recycled Aggregate Concrete-Filled Steel Tubular Columns: FEM Modelling and Sensitivity Analysis

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Time-Dependent Behavior of FRP Retrofitted RC Columns after Subjecting to Simulated Earthquake Loading

Residual Performance of Frp-Retrofitted Rc Columns after Being Subjected to Cyclic Loading Damage

Analytical Review on Eccentric Axial Compression Behavior of Short and Slender Circular RC Columns Strengthened Using CFRP

Experimental and numerical study of PEN FRP-strengthened circular RC columns under lateral cyclic loading with high axial compression ratio

A unified stress-strain model for LRS FRP-confined concrete columns with square and circular cross-sections

FRP-confined concrete in circular sections: Review and assessment of stress–strain models

Three-Dimensional Finite-Element Analysis of FRP-Confined Circular Concrete Columns under Eccentric Loading

FE modeling of Non-circular LRS FRP-confined concrete columns

Modeling for complete stress-strain curve of circular concrete columns confined with steel spiral and FRP

3D Finite Element Pseudodynamic Analysis of Deficient RC Rectangular Columns Confined with Fiber Reinforced Polymers under Axial Compression

3D FE analysis for buckling behavior of longitudinal reinforcement embedded in LRS FRP-confined concrete under axial compression

Analytical Modeling Approaches for the Cyclic Behavior of Concrete-Filled Circular Filament Wounded GFRP Tube Columns

Cyclic axial compression stress-strain model for FRP-confined concrete-encased cross-shaped steel columns

Cross-Sectional Unification on the Stress-Strain Model of Concrete Subjected to High Passive Confinement by Fiber-Reinforced Polymer