Enhanced Energy Density and Thermostability in Polyimide Nanocomposites Containing Core-Shell Structured BaTiO 3 @sio 2 Nanofibers

Junchuan Wang,Yunchen Long,Ying Sun,Xueqin Zhang,Hong Yang,Baoping Lin

DOI: https://doi.org/10.1016/j.apsusc.2017.07.149

IF: 6.7

2017-01-01

Applied Surface Science

Abstract:High energy density polymer nanocomposites with high-temperature resistance are quite desirable for film capacitors and many other power electronics. In this study, polyimide-based (PI) nanocomposite films containing the core-shell structured barium titanate@silicon dioxide (BT@SiO2) nanofibers have been successfully synthesized by the solution casting method. In the BT@SiO2/PI nanocomposite films, the dielectric permittivity as well as the breakdown strength increase significantly. The SiO(2 )shell layers with moderate dielectric permittivity could effectively mitigate the local field concentration induced by the large mismatch between the dielectric permittivity of BT and PI, which contributes to the enhancement of the breakdown strength of the PI nanocomposite films. As a result, the PI nanocomposite film filled with 3 vol% BT@SiO2 nanofibers exhibits a maximal energy density of 2.31 J cm(-3) under the field of 346 kV/mm, which is 62% over the pristine PI (1.42 J cm(-3) at 308 kV/mm) and about 200% greater than the best commercial polymer, i.e. biaxially oriented polypropylenes (BOPP) (approximate to 1.2Jm(-3)). The thermogravimetric analysis results indicate that the BT@SiO2/PI nanocomposite films have good thermal stability below 500 degrees C. (C) 2017 Elsevier B.V. All rights reserved.