Abstract:This study aims to propose a model for dynamically simulating the online-refueling process in pebble-bed reactor (PBR) using MCNPX. PBR has a special feature of online-refueling which can greatly reduce the outage time and enable a higher burnup in spent fuel. However, this feature also results in the dynamical fuel movements which may significantly increase the difficulty and the computational time in computer simulation. Therefore, an appropriate model is necessary to be proposed to simulate the burnup characteristics of online-refueling and to reduce the computational time simultaneously. All the calculations in this study were performed using MCNPX 2.7.0 with the ENDF/B-VII continuous energy nuclear data library. The PBR model was built according to the core design of HTR-10 but adopted some reasonable assumptions. The refueling process was emulated by utilizing the fuel loading scenario of the once through then out (OTTO) in combination with the layer-mixed-shell fuel movement. Additionally, the layer-mixed-shell fuel movement considered the concept of fuel channels, where the fuel pebbles only move in the same fuel channel, such that the burnup characteristics of fuel pebbles in both radial and axial direction can be identified separately. The core was divided into 9 fuel zones with a fixed volume and 3 fuel channels with a variety of fuel zones. Furthermore, the number of fuel zones in each fuel channel was determined based on the relative residence time of fuel pebbles in the core. The results revealed that the core can achieve an equilibrium fuel cycle after refueling several times, and after that all the core characteristics can nearly maintain unchanged between different cycles. Although the refueling process was modeled based on the OTTO fuel loading scenario instead of the multi-pass one, the discharged burnup can still reach the target burnup of the spent fuel for HTR-10, i.e. 72 GWd/tHM. In addition, the average discharged burnup under the equilibrium fuel cycle is approximate to 80 GWd/tHM, which also coincides the design value of the spent fuel for HTR-10. Therefore, the layer-mixed-shell movement model can consider the fuel movements in either radial or axial directions simultaneously and enable a more accurate prediction to the real refueling process of HTR-10 than our previous studies.

Algorithms of solving the burnup equation with external feed

The Laplace Transform Method for Solving the Burnup Equation with External Feed

Using Generalized Laguerre Polynomials to Compute the Matrix Exponential in Burnup Equations

Development of 3d Reactor Burnup Code Based on Monte Carlo Method and Exponential Euler Method

Using Laguerre Polynomials to Compute the Matrix Exponential in Burnup Calculations

Burnup study on the effective transmutation of minor actinides based on multi-enrichment fuel in the ADS subcritical reactor

A Simulation Method for Nuclear Power Plant with High-Temperature Gas-Cooled Reactor

Simultaneous Approach for Simulation of A High-Temperature Gas-Cooled Reactor

Numerical Simulation of Fuel Relocation at High Burnup with Discrete Element Method

Research on MMPA Algorithm for Solving Detailed Depletion Chain with the NUIT Code

Application of High-order Predict-correct Burnup Method in PWR Assembly Calculation

The Development of a High-Performance Combined Fission Matrix Neutron Transport and Depletion Coupled Calculation

Burnup Chain Compression Method Preserving Neutronics, Decay Photon Source Term and Decay Heat Calculation Results

Development of Burnup Methods and Capabilities in Monte Carlo Code RMC

Burn-up Function of Fuel Management Code for Aqueous Homogeneous Reactors and Its Validation

An Inversion Model for Burnup History of Spent Fuels in Pebble Bed HTGR Based on Optimization Algorithm

BEAVRS Full Core Burnup Calculation in Hot Full Power Condition by RMC Code

Burnup-Dependent Core Neutronics Analysis of Plate-Type Research Reactor Using Deterministic and Stochastic Methods

A Mathematic Model With Total Differential Equations Of Combustion In Thermobalance

Burnup computations of online-refueling process for pebble-bed reactors using layer-mixed-shell fuel movement model

Analysis of the pebble burnup profile in a pebble-bed nuclear reactor