Abstract:The effect of morphology of the long-period stacking ordered (LPSO) phase on mechanical properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) alloy have been studied. The results reveal that the block-like 14H-LPSO phases in and near grain boundaries can be formed during heat treatment at high temperature, but low temperatures is conducive to form the needle-like 14H-LPSO phases within α-Mg grains. During heat treatment at fixed temperature for different time, the preferential nucleation sites of the 14H-LPSO phases are located in grain boundaries, then the14H-LPSO phases grow into the α-Mg matrix in the form of needle-like, the needle-like 14H-LPSO phases gradually decrease its length after growing a certain stage, at last the needle-like 14H-LPSO phases disappear completely. The decomposition of the block-like 14H-LPSO phases is found during furnace cooling after homogenization. After decomposition of the block-like 14H-LPSO phases, the rapid diffusion of Zn atoms into α-Mg matrix leads to form the needle-like 14H-LPSO phases within α-Mg matrix, but the retention of RE atoms in grain boundaries results in forming the Mg-RE particles. After extrusion and subsequent ageing, it is found that the alloy with the needle-like 14H-LPSO phases exhibit superior elongation than the alloy without the needle-like 14H-LPSO phase. The precipitates of peak-aged alloys are studied by TEM. The <112−0>α demonstrates that the stacking faults can be observed, the serious lattice distortion appears near the stacking fault. The [0001] zone axis shows that the β′ and a new rod phase are found, and the enrichment of RE atoms are detected in the two phase by HADDF-STEM. It seems to be that the rod phase can be subdivided into a plurality of mutually parallel structure unit.

Hot Compression Behavior of the Mg-Gd-Y-Zn-Zr Alloy Filled with Intragranular Long-Period Stacking Ordered Phases

Hot Compression Behavior of Mg–Gd–Y–Zn–Zr Alloy Containing LPSO with Different Morphologies

Deformation-induced Dynamic Precipitation of 14H-LPSO Structure and Its Effect on Dynamic Recrystallization in Hot-Extruded Mg-Y-Zn Alloys

Effect of the interspacing of intragranular lamellar LPSO phase on dynamic recrystallization behaviors of Mg-Gd-Y-Zn-Zr alloys

Hot Deformation Characterization of Homogenized Mg-Gd-Y-Zn-Zr Alloy During Isothermal Compression

Effect of Deformation Parameters on Recrystallization Behavior and Long-Period Stacking-Ordered Phase of Mg-9Gd-4Y-2Zn-0.5Zr Alloy

Deformation Behavior, Microstructure Evolution and Hot Workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr Alloy

Hot Compression Deformation Behavior of Mg-9Gd-2.9Y-1.9Zn-0.4Zr-0.2Ca (wt%) Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructures and Mechanical Properties of Mg-10Gd-3Y-2Zn-0.5Zr Alloy

Hot Deformation and Processing Map of As-Homogenized Mg–9Gd–3Y–2Zn–0.5Zr Alloy

Hot Deformation Behavior of an As-Extruded Mg-2.5Zn-4Y Alloy Containing LPSO Phases

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Hot compression behavior, simulation verification and dynamic recrystallization mechanism of Mg-Gd-Y-Zr alloy

Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy

Comparison of Thermal Deformation Behavior and Characteristics of Mg-Gd-Y-Zn Alloys with and without Bulk LPSO Phase

High Temperature Compressive Deformation Behavior of an Extruded Mg–8Gd–3Y–0.5Zr (wt.%) Alloy

The Effect of Morphology of the Long-Period Stacking Ordered Phase on Mechanical Properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) Alloy

Effect of LPSO and SFs on Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy

The influences of long period stacking order phase and texture on compressive behavior of an extruded magnesium alloy

Dynamic Precipitation and Recrystallization Mechanism During Hot Compression of Mg-Gd-Y-Zr Alloy