Abstract:The propagation of the non-axisymmetric guided wave in the small-diameter pipe is complicated, which makes the circumferential position of the defect difficult to be determined. This article reports on the design of a segmented axially magnetized magnetostrictive patch transducer array for efficient transduction of non-axisymmetric L(M,2) modes to determine defect’s axial and circumferential positions in the small-diameter pipe. First, the background of the magnetostrictive patch transducer and non-axisymmetric guided wave in the pipe was presented. Moreover, the theoretical background to the influence of the length-to-width ratio of the magnetized rectangular patch on the demagnetizing factors was introduced. Second, the method of the pipe health monitoring using the designed segmented axially magnetized magnetostrictive patch transducer array was proposed. Third, the most suitable multi-belts of the flexible printed coils were chosen to provide the dynamic magnetic field by the comparison experiments. Then the signal amplitudes of the segmented axially magnetized magnetostrictive patch transducer array with different length–width ratios of magnetostrictive materials were compared with each other to prove the principle of demagnetization. Another two magnetostrictive patch transducer arrays employing permanent magnets were compared with the proposed segmented axially magnetized magnetostrictive patch transducer array. The experiments of pipe health monitoring were carried out to prove that the proposed method can realize pipe health monitoring over time. Fourth, the defect orientation experiments in a 304 stainless steel pipe with 48 mm inner diameter and 2 mm thickness were performed using the proposed segmented axially magnetized magnetostrictive patch transducer array at 650 kHz. The prediction of the circumferential position of the defects correlated well with the defect’s true location through matching the angular profiles of the experimental results and the modulated numerical analysis for several axial distances. The experimental results for the segmented axially magnetized magnetostrictive patch transducer array demonstrated that the proposed segmented axially magnetized magnetostrictive patch transducer array could potentially be applied to detect the axial and circumferential positions of the defect in a small-diameter pipe.

Multiple Type Defect Detection in Pipe by Helmholtz Electromagnetic Array Probe

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

A Novel Magnetic Force Transmission Eddy Current Array Probe and Its Application for Nondestructive Testing of Defects in Pipeline Structures

A technology of multiple-harmonic magnetic field excitation and its signal-processing method for noncontact steel pipeline defect detection

Circumferential and Longitudinal Defect Detection Using Multiphysics Fusion Electromagnetic Sensing Probe

A Flexible Film Type EMAT for Inspection of Small Diameter Pipe

Non-destructive Evaluation of Pipes by Microwave Techniques and Artificial Neural Networks

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Demagnetization-based Axial Magnetized Magnetostrictive Patch Transducers for Locating Defect in Small-Diameter Pipes Using the Non-Axisymmetric Guided Wave

A Defects Detection Method of Buried Liquid-Filled Pipes Based on T(0,1) Guided Waves

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Development of a Torsional Guided Wave EMAT for Internal Inspection of Ferromagnetic Pipes

Residual Magnetic Field Testing System with Tunneling Magneto-Resistive Arrays for Crack Inspection in Ferromagnetic Pipes

High-resolution Magnetic Imaging Probe with Staggered Sensor Arrays for Small Defects Inspection

Defect Detection for Drill Pipe Thread Based on Eddy Current Testing

Application of Microwaves for Nondestructive and High-Efficiency Detection of Wall Thinning Locations in a Long-Distance Metal Pipe

Deconvolution Imaging of Weak Reflective Pipe Defects Using Guided-Wave Signals Captured by a Scanning Receiver

Electromagnetic Coupling Sensing of Pipe In-Line Inspection System.

Defect Detection in the Dead Zone of Magnetostrictive Sensor for Pipe Monitoring

A Flexible and Noncontact Guided-Wave Transducer Based on Coils-Only EMAT for Pipe Inspection

Defect localization method for ferromagnetic pipes based on stepped magnetization in magnetic permeability perturbation testing