Abstract:In most of structural optimization approaches, finite element method (FEM) has been employed for structural response analysis and sensitivity calculation. However, the approaches generally suffer certain drawbacks. In shape optimization, cumbersome parameterization of design domain is required and time consuming remeshing task is also necessary. In topology optimization, design results are generally restricted on the initial design space and additional post-processing is required for communication with CAD systems. These drawbacks are due to the use of different mathematical languages in design or geometric modeling and numerical analysis: spline basis functions are used in design and geometric modeling whereas Lagrangian and Hermitian polynomials in analysis. Isogeometric analysis is a very attractive and promising alternative to overcome the limitations resulting from the use of the conventional FEM in structural optimization. In isogeometric analysis, the same spline information such as control points and spline basis functions which represent geometries in CAD systems are also used in numerical analysis. Such unification of the mathematical languages in CAD, analysis and design optimization can resolve the issues mentioned above. In this work, structural shape optimization using isogeometric analysis is studied on 2D and shell problems. The proposed framework is extended to topology optimization using trimming techniques. New inner fronts are introduced by trimming spline curves in topology optimization. Trimmed surface analysis which was recently proposed to analyze arbitrary complex topology problems is employed for topology optimization. Some benchmarking problems in shape and topology optimization are treated using the proposed approach.

Quick Pseudo-Random Topology Optimization Design Based on Triangle Element

Quick and Highly Efficient Modal Analysis Method Based on the Reanalysis Technique for Large Complex Structure and Topology Optimization

Topology Optimization of Large-Scale Structures Subjected to Stationary Random Excitation: an Efficient Optimization Procedure Integrating Pseudo Excitation Method and Mode Acceleration Method

A Fast Methodology for Topology Optimizations of Electromagnetic Devices

A Novel 3-D Topology Optimization Methodology Based on the Min-Cut Theorem

Structural Topological Optimization with Dynamic Fatigue Constraints Subject to Dynamic Random Loads

2D Minimum Compliance Topology Optimization Based on a Region Partitioning Strategy

Topology optimization of periodic cellular solids based on a superelement method

An efficient transient dynamic topology optimization framework based on successive iteration of analysis and design

A Pdoc Method For Topology Optimization Design

Topology Optimization of Structures under Dynamic Response Constraints

A polygonal topology optimization method based on the alternating active-phase algorithm

Stochastic Sampling for Structural Topology Optimization with Many Load Cases: Density-Based and Ground Structure Approaches

A topology, material and beam section optimization method for complex structures

Discrete variable topology optimization for maximizing single/multiple natural frequencies and frequency gaps considering the topological constraint

A Method Using Successive Iteration of Analysis and Design for Large-Scale Topology Optimization Considering Eigenfrequencies

Shape Optimization and Its Extension to Topological Design Based on Isogeometric Analysis

Simultaneous Shape and Topology Optimization with Implicit Topology Description Functions

A simple reliability-based topology optimization approach for continuum structures using a topology description function

DYNAMIC TOPOLOGICAL OPTIMIZATION METHOD OF CONTINUUM STRUCTURES BASED ON NODAL INDEPENDENT DESIGN VARIABLES

Reliability‐based Topology Optimization Against Geometric Imperfections with Random Threshold Model