Abstract:In gas transmission, the regulator needs to adjust the gas pressure from high to low. The pressure energy can be then recovered by an expander, and the expander can drive a generator to produce electricity. However, the gas pressure regulator system and generator torque process often present difficult adjustment of PI parameters, and strong non-linearity of the hysteresis comparator and switching table in the traditional direct torque control (DTC) cause difficulties in the controller design and lead to large fluctuations of the generator torque. This paper designs a model predictive controller (MPC) for the gas pressure regulator process to reduce generator torque fluctuations. Simultaneously, a fuzzy PI controller is designed for the generator rotational speed process, and an MPC controller is exploited for the torque process; they operate in a cascaded manner. The fuzzy PI controller is used to calculate the torque set point. And the MPC controller is designed to obtain the optimal voltage vector of the generator for improving control performance through time delay compensation. The simulation experimental results highlight that the fluctuation of the regulator outlet gas pressure is reduced by 7.9% and 8.1%, and the output torque range is reduced by 3.4% and 2.1% compared with the traditional PI control and fuzzy PI control, respectively. The generator torque fluctuation range is reduced by 82.3%, the rotational speed fluctuation range is reduced by 76.9%, and the three-phase current fluctuation range is reduced by 76.6% compared with the traditional DTC.

Hybrid Intelligent Control for Gas Collector of Coke Oven

PIDNN Based Intelligent Control of Ignition Oven

A Simplified Linear Iterative Predictive Functional Control Approach for Chamber Pressure of Industrial Coke Furnace

Combining predictive functional control and PID for liquid level of coking furnace

Application of Predictive Functional Control for Oxygen Content in Delayed Coking Furnace

Variable Structure Fuzzy Control for Gas Collector Pressure in Coke Oven

Control Strategies for Gas Pressure Energy Recovery Systems

Predictive Functional Control of Outlet Temperature in Delayed Coking Furnace

Dynamic Modeling And Nonlinear Predictive Control Based On Partitioned Model And Nonlinear Optimization

Rail pressure controller design of GDI basing on predictive functional control

Variable Structure Fuzzy Control Based on Particle Swarm Optimization for Gas Collector Pressure

Hybrid Intelligent Control Based on Condition Identification for Combustion Process in Heating Furnace of Compact Strip Production

Design and Realization of Combustion Control Strategy for Industrial Boilers under JX-300XP DCS

Design of Dynamic Matrix Control Based PID for Residual Oil Outlet Temperature in a Coke Furnace

Two-timescale Nonlinear Model Predictive Control for Flexible Operation of Coal-Fired Power Plant with Post Combustion CO2 2 Capture System

Optimization of multivariable PI controllers for ALSTOM gasifier benchmark problem

Probability-Based Robust Optimal Pi Control For Shell Gasifier In Igcc Power Plants

Multi-variable PID Neural Network Decoupling Algorithm in Scrap Copper Smelting Process Control

Optimal control of oil-gas switch process of CNG/diesel dual fuel engine

A practical predictive control algorithm for embedded system and its application

Flexible operation of large-scale coal-fired power plant integrated with solvent-based post-combustion CO2 capture based on neural network inverse control