Abstract:Effective trajectory planning is critical for achieving precise autonomous navigation and safe landing of parafoil delivery systems. However, current parafoil trajectory planning still faces challenges in ensuring consistency between actual system behavior and algorithmic real-time performance. Due to the strong fluid–structure interaction (FSI) between the flexible canopy and airflow, traditional dynamic models based on point mass and rigid-body assumptions often lack aerodynamic accuracy. These models produce planned trajectories in simulation environments that are inconsistent with the actual system's behavior and cannot directly provide an effective reference for airdrop experiments. Additionally, traditional planning methods require a significant amount of time to calculate complex dynamic models and generate fixed trajectories in advance. These methods not only fail to provide usable results in a short period of time, but also cannot prevent the accumulation of tracking errors by adjusting the target trajectory in real time. To address these issues, this paper proposes a flexible 8-degree-of-freedom (8-DOF) dynamic model based on the FSI method, utilizing the actual aerodynamic parameters of the canopy to achieve improved consistency with the behavior of the actual system. The Soft Actor–Critic (SAC) algorithm is then employed to achieve real-time trajectory planning for parafoil airdrop systems, addressing the real-time planning performance limitations of traditional algorithms. The airdrop experiments validate that the simulation trajectories generated using this model demonstrate higher consistency with actual flight trajectories, providing more accurate references for pre-flight trajectory optimization. Moreover, the proposed method enables real-time trajectory planning and dynamically adjusts target trajectories based on the current position and attitude of the parafoil, effectively mitigating the accumulation of errors.

Research on Parafoil Stability Using a Rapid Estimate Model

Quasi-steady three-degrees-of-freedom aerodynamic model of inclined/yawed prisms: Formulation and instability for galloping and static divergence

Optimal homing trajectory design for parafoil systems using sensitivity analysis approach

Fluid–structure interaction-based aerodynamic modeling for flight dynamics simulation of parafoil system

Stability of the Flapping-Wing Vehicle Near Hovering under Active Control by Varying Flapping Frequency

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Flexible Modeling of Parafoil Delivery System in Wind Environments.

Simulation and Analysis of Aerodynamic Characteristics during Parafoil Canopy Curving Process and Application by LBM

A High-Feasibility Real-Time Trajectory-Planning Method for Parafoils Based on a Flexible Dynamic Model

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Force Model of Flapping Foil Stabilizers Based on CFD Parameterization

Synchronize the Parafoil and the Vessel: A Hierarchical Distributed Nonlinear Model Predictive Control Approach

Rotor Aeroelastic Stability Modeling Based on Inertial Coordinate Frame

Sideslip Angle Estimation Based Active Disturbance Rejection 3D Trajectory Tracking Control for Powered Parafoil System and Hardware-in-the-loop Simulation Verification

Research on the flight mechanism of high altitude aerostats based on the parameterized model

In-flight Wind Field Identification and Prediction of Parafoil Systems

Aerodynamic Prediction of High-Lift Configuration Using K−v2¯−ω Turbulence Model

Mathematical Modeling and Stability Analysis of Tiltrotor Aircraft

Dynamic-model-based closed-loop guidance and control for heavy parafoil system precision landing

A MODIFIED MODEL FOR THE VIBRATIONS OF A TWO-DEGREE-OF-FREEDOM HYDROFOIL-ROD SYSTEM CONSIDERING 3D EFFECT

An Efficient Approach for Stability Analysis and Parameter Tuning in Delayed Feedback Control of a Flying Robot Carrying a Suspended Load