Insights into the reduction of 4-nitrophenol to 4-aminophenol on catalysts

Xiangkai Kong,Hongying Zhu,ChangLe Chen,Guangming Huang,Qianwang Chen

DOI: https://doi.org/10.1016/j.cplett.2017.06.049

IF: 2.719

2017-01-01

Chemical Physics Letters

Abstract:•Water molecules not NaBH4 are the hydrogen source for the reduced amino groups.•NaBH4 could contribute to the ionization of H+ from water.•This reduction process is spontaneous to some extent.

What problem does this paper attempt to address?

Progress in synthesis of p-aminophenol by catalytic hydrogenation of nitrobenzene

Yingxin Liu,Xiaoshuang Liu,Mao Zeng,Huimin Shu,Jiongtao Lou,Zuojun Wei

DOI: https://doi.org/10.3969/j.issn.1000-8144.2018.01.014

2018-01-01

Abstract:Progresses in the reaction mechanism,hydrogenation catalysts,acid catalysts and bifunctional catalysts of catalytic hydrogenation of nitrobenzene to p-aminophenol preparation technology were reviewed. The monometallic,bimetallic catalysts and the acid catalysts,which consist of solid acid,acidic ionic liquid and CO2/H2O acid reaction system,were discussed systematically. The advantages and disadvantages of various kinds of catalysts were compared and analyzed. Furthermore,the development prospects of metal-solid acid bifunctional catalysts, bimetallic catalysts and novel metal nanoparticles catalysts encapsulated by molecular sieve were forecasted.
Kinetic Analysis of 4-Nitrophenol Reduction by “Water-Soluble” Palladium Nanoparticles

Anas Iben Ayad,Denis Luart,Aissa Ould Dris,Erwann Guénin

DOI: https://doi.org/10.3390/nano10061169

IF: 5.3

2020-06-15

Nanomaterials

Abstract:The most important model catalytic reaction to test the catalytic activity of metal nanoparticles is the reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride as it can be precisely monitored by UV–vis spectroscopy with high accuracy. This work presents the catalytic reduction of 4-nitrophenol (4-Nip) to 4-aminophenol (4-Amp) in the presence of Pd nanoparticles and sodium borohydride as reductants in water. We first evaluate the kinetics using classical pseudo first-order kinetics. We report the effects of different initial 4-Nip and NaBH4 concentrations, reaction temperatures, and mass of Pd nanoparticles used for catalytic reduction. The thermodynamic parameters (activation energy, enthalpy, and entropy) were also determined. Results show that the kinetics are highly dependent on the reactant ratio and that pseudo first-order simplification is not always fit to describe the kinetics of the reaction. Assuming that all steps of this reaction proceed only on the surface of Pd nanoparticles, we applied a Langmuir−Hinshelwood model to describe the kinetics of the reaction. Experimental data of the decay rate of 4-nitrophenol were successfully fitted to the theoretical values obtained from the Langmuir–Hinshelwood model and all thermodynamic parameters, the true rate constant k, as well as the adsorption constants of 4-Nip, and BH4− (K4-Nip and KBH4−) were determined for each temperature.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
The identification of byproducts from the catalytic reduction reaction of 4-nitrophenol to 4-aminophenol: A systematic spectroscopic study

Naveen Kumar Reddy Bogireddy,Yetzin Rodriguez Mejia,Tejraj M Aminabhavi,Victor Barba,Raul Herrera Becerra,A David Ariza Flores,Vivechana Agarwal

DOI: https://doi.org/10.1016/j.jenvman.2022.115292

2022-08-15

Abstract:Acetaminophenol, commonly recognized as paracetamol (considered safer than aspirin) is formed by nitration of phenol (4-nitrophenol (4-NP)) for its conversion to 4-aminophenol (4-AP), followed by the acetylation for the final product. As 4-NP is an intermediate product in acetaminophenol (paracetamol) production from phenol the dynamic analysis of acetylation of amine group is important. This study focuses on the feasibility of spectroscopic studies to monitor the removal of 4-NP using sodium borohydride (NaBH4) probe reaction in the presence of silver, gold, and bimetallic Ag/Au nanoparticles. UV-visible absorbance and fluorescence spectroscopy measurements reveal the formation of 1,4-benzoquinone (BQ), hydroquinone (HQ), and phenol (Ph) as the final products, in addition to the formation of typically reported 4-AP. The intermediates of NaBH4 seem to play a significant role in the formation of BQ, which converts to HQ in the basic medium followed by the formation of phenol in an acidic medium. Complete kinetic analysis with respect to spectroscopic studies of the standard compounds is presented. Similar results were obtained with 4-NP spiked river and seawater samples. The present ﬁndings may lead to catalytic benchmarking that can diﬀer from most of the current practices and highlight the importance of adopting a holistic approach towards the fundamental understanding of 4-NP catalytic reduction that must take into account the concentration of NaBH4 and pH interdependencies.
Molecular Manipulation of Microenvironment of Au Active Sites on Mesoporous Silica for Enhanced Catalytic Reduction of 4-Nitrophenol

Meng Ding,Bo Peng,Hui Chen,En-Hui Yuan,Laurent Bonneviot,Peng Wu,Kun Zhang,Jiafeng Zhou,Yi-Song Chen,Belen Albela

DOI: https://doi.org/10.1039/d2cy02023h

2023-03-03

Abstract:At the confined nanospace and/or nanoscale interface, the catalytic nature of active sites on the molecule level still remains elusive. Herein, with the catalytic hydride reduction of 4-nitrophenol (4-NP) over gold nanoparticles (NPs) catalysts as a prototype reaction, the influence of delicate change of microenvironment of catalytic active site on the reaction kinetics of 4-NP to 4-aminophenol (4-AP) with the introduction of varied alkali-metal ion (AM + ) salt, have been deeply investigated. We demonstrate that structural water (SW) adsorbed on Au NPs in the form of {OH - ·H 2 O@Au NPs} is the real catalytic active sites (not alone Au NPs), and in the presence of lithium chloride (LiCl), it shows the best catalytic performance. In addition, the isotope labeling and kinetic isotope effect (KIE) experiments evidences that, the reduction of 4-NP does not follow the classical Langmuir-Hinshelwood (L-H) bimolecular mechanism, but an interfacial SW dominated electron and proton transfer mechanism. The proposed mechanism answers why the dissociation of O-H bond of water is the rate-determining step (RDS) of 4-NP reduction, and, counter-intuitively, the solvent water is the hydrogen source of final product 4-AP, instead of sodium borohydride (NaBH 4 ) reducer. Importantly, the co-existence of Li + and Cl - ions synergistically stabilizes the transition state of reaction and accelerates the interfacial electron and proton transfer, consequently enhancing the reaction kinetics. The model of structural water as a bridge to transfer electron and proton at nanoscale interface is the reminiscent of working mechanism of photosystem two (PSII) for water splitting on Mn 4 CaO 5 cluster.

chemistry, physical
High-Performance Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol over Pt Nanoparticles Supported on Co-Al LDH Nanosheets

Chenzhe Xu,Yue Qiu,Xiaoting Yang,Zifei Gao,Zheng Wang,Cai Liu,Yanran Sun,Juanjuan Ma,Lin Liu

DOI: https://doi.org/10.3390/cryst14030284

IF: 2.7

2024-03-20

Crystals

Abstract:In this study, a Pt@Co-Al LDH hybrid structure was fabricated by assembling the metal precursor PtCl62− with the exfoliated LDH nanosheets followed by in situ reduction by NaBH4. The morphology, composition and microstructure of the hybrid were characterized by FESEM, HRTEM, XRD, XPS and BET techniques. Pt nanoparticles (NPs) with an average particle size of 3.1 nm were successfully and uniformly loaded on the surface of LDH nanosheets. The catalytic activity of the Pt@Co-Al LDH hybrid was tested for the reduction of 4-nitrophenol, which is one of the most frequent pollutants in wastewater effluent from the pharmaceutical and textile industries. The hybrid displays superior catalytic activity and stability in the reduction of 4-NP under environmental conditions with NaBH4 as a reducing agent. The hybrid can be recovered in a simple way and still shows high catalytic activity after five reuses.

materials science, multidisciplinary,crystallography
Deciphering the mechanistic insights of 4-nitrophenol reduction catalyzed by a 1D–2D Bi 2 S 3 nanostructured catalyst

Bhagirath Mahto,Ashok Barhoi,Haider Ali,Sahid Hussain

DOI: https://doi.org/10.1039/d4nr00153b

IF: 6.7

2024-01-01

Nanoscale

Abstract:An anisotropic 1D-2D Bi 2 S 3 nanostructured catalyst is developed for 4-nitrophenol (4-NP) reduction and highlighted the critical roles of water as proton source and adsorbed/absorbed hydrogen species on the catalyst surface in 4-NP reduction.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
High-efficient Catalytic Reduction of 4-Nitrophenol Based on Reusable Ag Nanoparticles/graphene-Loading Loofah Sponge Hybrid.

Y. Y. Liu,Y. H. Zhao,Y. Zhou,X. L. Guo,Z. T. Chen,W. J. Zhang,Y. Zhang,J. Chen,Z. M. Wang,L. T. Sun,T. Zhang

DOI: https://doi.org/10.1088/1361-6528/aac3e8

IF: 3.5

2018-01-01

Nanotechnology

Abstract:Noble metal nanoparticles (NPs) such as Au and Ag have shown many applications in the field of catalysis, sensing etc. due to their excellent photoelectric properties. But agglomeration and a low recovery rate are big problems for their applications. In this research, a novel Ag NPs/graphene (reduced graphene oxide)-loading loofah sponge (Ag NPs/RGO-LS) was synthesized through a one-step reduction method. Where the RGO is used as a nano-support with the high specific surface area and the high conductivity to prevent the agglomeration of Ag NPs and provide a conductive layer. The natural, green, low-cost and high-yield LS is designed as a macro-support to reduce the loss of Ag NPs during recycling. The as-prepared Ag NPs/RGO-LS is stable, uniform, and exhibits high efficiency and reusability in the catalytic reduction of 4-nitrophenol (4-NP) with a high rate constant of 1.893 min-1 as well as an average conversion of 98% in 6 min during five cycles. The results have not only paved the way for the wide application of Ag NPs but also provide a new road for the application of other metal NPs.
Self-driven in-situ facile synthesis of CuO/Cu2O for enhanced catalytic reduction of 4-nitrophenol by acetic acid

Ting Zhu,Qian He,Ziwei Wang,Juan Zhang,Hanke Li,Hong-Quan Fu,fang liao

DOI: https://doi.org/10.1039/d2nj02366k

IF: 3.3

2022-07-21

New Journal of Chemistry

Abstract:A series of CuO/Cu2O, Cu2O/Cu catalyst structures with different morphologies are in-situ synthesized via controlling the anionic species of the copper salts in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The prepared CuO/Cu2O-rAc is used to catalytically reduce 4-NP. It shows that CuO/Cu2O-rAc prepared with Cu(Ac)2.H2O as an copper source exhibits a higher k of 0.2019 min-1 and km of 0.2019 min-1 μg-1. The catalytic reduction property is in accordance with the CH3COOH content of CuO/Cu2O-rAc. The obtained CuO and Cu2O can form heterojunction structure, improving the electron transfer rate for enhancing the adsorption of 4-NP and desorption of 4-AP. Moreover, a key factor affecting the catalytic efficiency of CuO/Cu2O-rAc refers to the pH, which affects NaBH4 forming H2. This production strategy is highly efficient and can be used to fabricate other similar catalytic hydrogenation reactions.

chemistry, multidisciplinary
CoFe Nanoparticle-Decorated Reduced Graphene Oxide for the Highly Efficient Reduction of 4-Nitrophenol

Chuncai Kong,Weijie Lei,Bosen Lei,Fangzhao Pu,Ge Wang,Xiaojing Zhang,Cheng Zhou,Zhimao Yang

DOI: https://doi.org/10.1021/acs.langmuir.1c01532

IF: 3.9

2021-09-03

Langmuir

Abstract:High-performance, nonprecious metal catalysts with special morphologies and easy-to-recycle properties are essential for the treatment of environmental pollutants. Herein, CoFe nanoparticle-decorated reduced graphene oxide (RGO) catalysts were designed and successfully fabricated, and the catalyst was then used to reduce 4-nitrophenol into 4-aminophenol. Outstanding catalytic properties with a reduction rate constant of 4.613 min–1 were achieved due to the synergistic properties of the CoFe metal alloy and the high-conductivity RGO components in the catalysts. In addition, the catalyst was conveniently recovered via magnets due to its inherent magnetic properties. The facile preparation, outstanding catalytic performance, structural stability, and low material costs make the CoFe/RGO nanocatalyst a promising candidate for potential applications in catalysis.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.1c01532.Low-magnification SEM images, size distributions, time-dependent UV–vis absorption spectra of 4-NP reduction to 4-AP, TG curves, and HPLC chromatogram (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary, physical,materials science
Kinetics of light assisted catalytic reduction of 4-NP over Ag/PDA

Kun Wang,Xun Zhu,Rong Chen,Dingding Ye,Yang Yang,Qiang Liao

DOI: https://doi.org/10.1016/j.ces.2022.117778

IF: 4.7

2022-09-21

Chemical Engineering Science

Abstract:In this work, Ag nanoparticles as surface plasmon catalysts were prepared on polydopamine microspheres via in-situ reduction for catalytic 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. The kinetics of catalytic reaction under light and dark conditions was compared. It was found that the reaction rate constant under light condition was increased by 53.6% due to the surface plasmon resonance effect. The transition state theory was used to reveal the enhanced mechanism of catalytic conversion of 4-nitrophenol under light condition. It is demonstrated that the light-excited high-energy electrons are responsible for the shift of the adsorbed reactants to the excited state with higher potential energy, lowering the apparent activation energy from 47.2 kJ/mol to 32.6 kJ/mol and thereby enhancing the conversion of 4-nitrophenol to 4-aminophenol. This study offers a deep insight into the contribution of surface plasmon resonance to catalytic conversion of 4-nitrophenol by surface plasmon catalysts.

engineering, chemical
Solvent-free synthesis of N-doped carbon-based catalyst for high-efficient reduction of 4-nitrophenol

Dong Chen,Liang Wu,Siyang Nie,Pengfei Zhang

DOI: https://doi.org/10.1016/j.jece.2021.105649

IF: 7.7

2021-08-01

Journal of Environmental Chemical Engineering

Abstract:In this work, we report a facile, solvent-free, and one-step route for the fabrication of N-doped carbon by employing low-cost raw materials (i.e., alginic acid and ammonium chloride), which can serve as a high-efficiency metal-free catalyst for the reduction of 4-nitrophenol (4-NP). The as-prepared catalyst possesses high nitrogen content (up to 5.49 at %), high specific surface area (up to 630 m2·g-1), and abundant defects, making it possible to provide sufficient active sites for the reduction of 4-NP. The excellent catalytic performance with high apparent rate constant (0.2141 min-1) and TOF value (1.33×10-4 mmol∙mg-1∙min-1), matches or even exceeds that of most reported metal-based catalysts. Density functional theory (DFT) calculations reveal that this excellent catalytic activity can be achieved via tuning the electron transfer and promoting the adsorption of 4-NP ions by introducing N atoms. The kinetic and thermodynamic parameters of the reaction were explored in detail, fitting well to the Langmuir-Hinshelwood model. This work not only proposes a versatile strategy to prepare advanced N-doped carbon materials but also provides useful guidance for designing and developing biomass-derived metal-free catalysts for various catalytic reactions.

engineering, chemical, environmental
Preparation of Bismuth Nanoparticles in Aqueous Solution and Its Catalytic Performance for the Reduction of 4-Nitrophenol

Yu Liu,Wei Wang,Xiaoyang Xu,Xichuan Li,Fengling Xia,Li Zhang,Haixia Qiu,Jian-ping Gao,Lei Zhang

DOI: https://doi.org/10.1021/IE501142A

2014-06-17

Abstract:A simple method to fabricate Bi nanoparticles by using redox reactions between sodium borohydride and ammonium bismuth citrate in the presence of soluble starch in water phase was developed. The results show that soluble starch is better than PVP in stabilizing Bi nanoparticles. The as-prepared Bi nanoparticles were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, energy-dispersive X-ray, and powder X-ray diffraction. The catalytic performance of the Bi nanoparticles for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of sodium borohydride was studied. The effects of sodium borohydride concentration, initial 4-NP concentration, catalyst dose, and reduction temperature were also investigated.

Chemistry,Materials Science
Strongly Coupled Ag/TiO2 Heterojunctions for Effective and Stable Photothermal Catalytic Reduction of 4-Nitrophenol

Ying Gu,Yanqing Jiao,Xiaoguang Zhou,Aiping Wu,Bater Buhe,Honggang Fu

DOI: https://doi.org/10.1007/s12274-017-1612-5

IF: 9.9

2017-01-01

Nano Research

Abstract:The development of effective catalysts for the catalytic conversion of the harmful nitrophenol (NP) into the useful aminophenol (AP) has received extensive interest. Herein, we report the easy and large-scale synthesis of strongly coupled Ag/TiO 2 heterojunctions based on the coordinated action of organic components with a multi-kind metal precursor. The heterojunctions were effective and stable catalysts for the photothermal catalytic reduction of 4-NP to 4-AP. In the synthesis, critic acid, ethylene glycol, AgNO 3 , and tetrabutyl titanate were dissolved and coordinated in water. Under heating, a precursor gel having a uniform distribution of Ag and Ti was gradually formed. Via calcination in air, the Ti precursor was transformed into TiO 2 , accompanied by the reduction of Ag + to Ag nanoparticles. The formation of Ag/TiO 2 composites with intimate interface contact benefited from the uniform distribution of different components in the precursor gel. The Ag/TiO 2 functioned as an effective catalyst for the reduction of 4-NP, exhibiting higher activity than the many reported Ag-based catalysts. The catalytic reaction over Ag/TiO 2 had a small t 0 with good activity and reuse performance. After 10 cycles of reuse, the conversion efficiency exhibited no obvious change. Importantly, the conversion of 4-NP was significantly enhanced under light irradiation provided by a 150-W Xe lamp (the visible light from cutoff have equal function), but ultraviolet light did not promote the conversion. The conversion time was reduced from 620 to 270 s with light irradiation (15 °C). The reaction rate under light irradiation (0.014 s −1 ) was approximately three times higher than that in the dark at 15 °C (0.0044 s −1 ) and even better than that in the dark at 25 °C (0.01 s −1 ). A series of experiments indicated that the light irradiation promoted the conversion of 4-NP because of the localized surface plasmon resonance effect of Ag, which generated hot e − and h + particles and local heating around the particles via their absorption of the light.
Synthesis of Pt Nanoparticles Decorated 1,5-Diaminoanthraquinone Nanofibers and Their Application Toward Catalytic Reduction of 4-Nitrophenol.

Guohui Chang,Yonglan Luo,Xiaoyun Qin,Wenbo Lu,Abdullah M. Asiri,Abdulrahman O. Al-Youbi,Xuping Sun

DOI: https://doi.org/10.1166/jnn.2012.6566

2012-01-01

Journal of Nanoscience and Nanotechnology

Abstract:The present communication reports on the rapid preparation of 1,5-diaminoanthraquinone nanofibers (DAAQNFs) on a large scale by a reprecipitation method and their subsequent decoration with small platinum nanoparticles (PtNPs) using tannic acid (TA) as a reducing agent. It suggests the resultant PtNP/DAAQNF composites exhibit a good catalytic activity toward reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by NaBH4. It also suggests that the composites exhibit higher catalytic activity than the PtNPs due to that the DAAQNF support may play an active part in the catalysis, yielding a synergistic effect. The possible mechanism involved has also been discussed.
Insights into Catalytic Roles of Noble-Metal-free Catalysts CoxSy for Reduction of 4-Nitrophenol

Rongmei Zhou,Xiaoyan Yang,Peng Zhang,Lixia Yang,Chengwei Liu,Dan Liu,Jianzhou Gui

DOI: https://doi.org/10.1039/c8cp05309j

2018-01-01

Abstract:To develop noble-metal-free catalysts, three CoxSy samples, i.e. Co9S8, CoS and CoS2, have been prepared and investigated for the reduction of 4-nitrophenol. Co9S8 has the best surface electron immigration efficiency and the highest H2-adsorption capability, which make it the most promising catalyst. On the other hand, CoS has higher electron transfer efficiency than CoS2, leading to stronger H absorption capability. As a result, the catalytic activity of the three catalysts shows the following trend: Co9S8 > CoS > CoS2 under the same reaction conditions. Finally, a plausible catalytic mechanism has also been proposed, which is helpful in acquiring an in-depth insight into the catalytic role of CoxSy.
An Efficient Integrated Catalyst for the Reduction of 4-Nitrophenol in a Continuous Flow System: Ag Nanoparticles Loaded Graphene Nanosheets Immobilized on Ti Meshes

Yinyan Wu,Weiming Hao,Xiangqing Li,Lixia Qin,Taiyang Zhang,Shi-Zhao Kang

DOI: https://doi.org/10.1016/j.diamond.2022.109135

IF: 3.806

2022-01-01

Diamond and Related Materials

Abstract:When the wastewater containing 4-nitrophenol is restored on an industrial scale, it is needful to find an efficient catalyst which can be used in a continuous flow apparatus. Here, graphene nanosheets loaded with Ag nanoparticles were immobilized on Ti meshes. Afterwards, their catalytic behavior was explored in a continuous flow apparatus for the reduction of 4-nitrophenol. It can be found that the Ag nanoparticles loaded graphene nanosheets immobilized on Ti meshes are an efficient catalyst for elimination of 4-nitrophenol from water which is suitable for continuous flow system. When the 4-nitrophenol solution run through the above-mentioned Ti meshes at flow velocity of 3 mL min(-1), 92% 4-nitrophenol (100 mL, 1.0 x 10(-4) mol L-1) could be eliminated in 150 min. Moreover, this integrated catalyst can also exhibit quite satisfactory durability. After it was used two times, its catalytic activity still could maintain 84% activity of the fresh sample in the third cycle.
Swift reduction of 4-nitrophenol by easy recoverable magnetite-Ag/layered double hydroxide/starch bionanocomposite

Mohammad Dinari,Firooze Dadkhah

DOI: https://doi.org/10.1016/j.carbpol.2019.115392

2020-01-15

Abstract:The main source of nitroaromatic compounds in nature is anthropogenic activities. In the present report, a facile and green method was employed to fabricate highly efficient catalyst to turn toxic nitrophenols to more safe aminophenols. The Fe3O4/Ag@Ca-Al LDH hybrid (FAL hybrid) was synthesized by the Fe3O4 and Ag nanoparticles supported on layer double hydroxide (LDH) and the bionanocomposite (BNC) of this hybrid and starch was prepared via an in situ growth method. The FAL hybrid and BNC were characterized by different techniques. The reduction reaction of 4-nitrophenol in the presence of these catalysts indicated that both of them have high catalytic activity due to their large numbers of hydroxyl groups as capping agent. The comparison rate kinetics study between 4-nitrophenol and 2-nitrophenol showed that the FALS-BNC has higher potential in the case of the para derivative. Also, catalysts were recovered without difficulty and reused after completion of the reduction reaction.
Preparation of Cu2O/Au Composite Nanomaterials for Effective Reduction of 4‐Nitrophenol

Yang Zhao,Shiliang Bi,Faming Gao,Lei Wang

DOI: https://doi.org/10.1002/slct.202204665

2023-01-01

ChemistrySelect

Abstract:The conversion of nitroaromatics to aminobenzene plays an important role in the synthesis of medicines or fine chemicals. In this work, we successfully prepared Cu2O/Au nanocubes with different Au content for the reduction of 4-nitrophenol. With the increase of gold precursor concentration or reaction time, the density of Au nanoparticles (NPs)on Cu2O surface increases, which results in the stronger electron transfer between Au and Cu2O, and thus the better synergistic catalytic performance of Cu2O/Au nanoparticles toward 4-Nitrophenol (4-NP). In this work, we found the Au component in the nanoparticles played an important role in charge redistribution and transfer, as well as the adsorption and reduction of 4-NP. Therefore, the degradation performance of Cu2O/Au composite is better than that of pure Cu2O, and the degradation rate of 4-NP can reach almost 90 % in 10 min, therefore providing a new idea for the rational design of effective nanocatalysts.
Nano-Ni/Cu decorated iron oxide for catalytic reduction of 4-nitrophenol

Anname Lourens,Anzel Falch,Rehana Malgas-Enus

DOI: https://doi.org/10.1016/j.matchemphys.2024.129022

IF: 4.778

2024-02-10

Materials Chemistry and Physics

Abstract:This study utilized fast, affordable, and simple impregnation methods to produce a more affordable, highly active, and recyclable Cu and Ni magnetic nanocatalyst for the removal of 4-nitrophenol (4-NP) from wastewater. The core-shell synthesis methods used capture the magnetic capability at the center via a superparamagnetic iron oxide nanoparticle (SPION) core while utilizing the catalytically active Cu and Ni atoms on its surface. Monometallic coated Ni and Cu SPIONs (SPION@Ni) and SPION@Cu) as well as bimetallic Cu/Ni coated SPIONs (SPION@Ni/Cu) ranging between 15 and 21 nm were evaluated for the reduction of 4-NP to 4-aminophenol (4-AMP) in the presence of excess NaBH 4 as reducing agent. The Ultraviolet–visible (UV–Vis) spectroscopy method was utilized to monitor the catalytic kinetic reaction. The assessed nanoparticles demonstrated enhanced activity in the progression from SPION@Ni to SPION@Cu, with SPION@Ni/Cu nanoparticles proving to be the most efficient, particularly with AL18 (SPION@Ni/Cu (1(SPION):0.2(M 2+ )) achieving a k app of 0.103 s −1 . In addition, AL18 was easily separated via magnetic decantation and successfully reused for up to ten consecutive reactions.

materials science, multidisciplinary
Na+ and Cl- adsorption derived enhancement in 4-nitrophenol reduction using Au/Ag nanoparticle: An experimental and theoretical study

Silva Beltrán Eduardo,Abdel Ghafour El Hachimi,Miguel Monge,José M López-de-Luzuriaga,Vivechana Agarwal,Naveen Kumar Reddy Bogireddy

DOI: https://doi.org/10.1016/j.chemosphere.2024.143576

IF: 8.8

Chemosphere

Abstract:4-Nitrophenol (4-NP) is an organic contaminant attached to textiles, pharmaceuticals, and pesticides. Its presence has been increasingly detected in various water bodies such as lakes, rivers, and occasionally in drinking water. The present work shows the reduction of 4-NP using a hybrid catalytic system composed of gold and silver nanoparticles supported onto the biogenic porous silica (AgAu-SiO2). The AgAu nanoparticles were fabricated in situ onto the salinized biogenic silica substrates through a green synthesis. The catalytic reaction was analyzed with NaBH4 and the proposed AgAu-SiO2 catalyst. Mimicking 4-NP reduction reaction in different spiked river/marine water samples revealed superior catalytic activity in marine water. Subsequently, interference studies performed in the presence of different metal salts and pHs (found in the marine water) showed the vital role played by NaCl in the 4-NP reduction as the increase in the NaCl concentration enhances the catalytic activity of the proposed catalyst. Additional reusability of the proposed catalyst demonstrated its efficacy up to 10 cycles. The density functional theory (DFT) results supported the experimental findings, confirming the crucial role of Na+ and Cl- in the catalytic process. Our experimental results, which have significant implications for the field, have been explained by comparing them with DFT calculations. The main reason behind the enhanced catalysis performance in our systems was deduced at the atomic scale. The study included the adsorption energies and electronic density of molecular structures (4-NP and 4-AP) on different surface coverages. In exceptional cases, at the intermediate of 4-NP on Au(111)-NaCl, a displacement of the electronic density is observed, leading to a quinoline-type ring weakening the N-O bond and favoring the catalytic performance.

Insights into the reduction of 4-nitrophenol to 4-aminophenol on catalysts

Progress in synthesis of p-aminophenol by catalytic hydrogenation of nitrobenzene

Kinetic Analysis of 4-Nitrophenol Reduction by “Water-Soluble” Palladium Nanoparticles

The identification of byproducts from the catalytic reduction reaction of 4-nitrophenol to 4-aminophenol: A systematic spectroscopic study

Molecular Manipulation of Microenvironment of Au Active Sites on Mesoporous Silica for Enhanced Catalytic Reduction of 4-Nitrophenol

High-Performance Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol over Pt Nanoparticles Supported on Co-Al LDH Nanosheets

Deciphering the mechanistic insights of 4-nitrophenol reduction catalyzed by a 1D–2D Bi 2 S 3 nanostructured catalyst

High-efficient Catalytic Reduction of 4-Nitrophenol Based on Reusable Ag Nanoparticles/graphene-Loading Loofah Sponge Hybrid.

Self-driven in-situ facile synthesis of CuO/Cu2O for enhanced catalytic reduction of 4-nitrophenol by acetic acid

CoFe Nanoparticle-Decorated Reduced Graphene Oxide for the Highly Efficient Reduction of 4-Nitrophenol

Kinetics of light assisted catalytic reduction of 4-NP over Ag/PDA

Solvent-free synthesis of N-doped carbon-based catalyst for high-efficient reduction of 4-nitrophenol

Preparation of Bismuth Nanoparticles in Aqueous Solution and Its Catalytic Performance for the Reduction of 4-Nitrophenol

Strongly Coupled Ag/TiO2 Heterojunctions for Effective and Stable Photothermal Catalytic Reduction of 4-Nitrophenol

Synthesis of Pt Nanoparticles Decorated 1,5-Diaminoanthraquinone Nanofibers and Their Application Toward Catalytic Reduction of 4-Nitrophenol.

Insights into Catalytic Roles of Noble-Metal-free Catalysts CoxSy for Reduction of 4-Nitrophenol

An Efficient Integrated Catalyst for the Reduction of 4-Nitrophenol in a Continuous Flow System: Ag Nanoparticles Loaded Graphene Nanosheets Immobilized on Ti Meshes

Swift reduction of 4-nitrophenol by easy recoverable magnetite-Ag/layered double hydroxide/starch bionanocomposite

Preparation of Cu2O/Au Composite Nanomaterials for Effective Reduction of 4‐Nitrophenol

Nano-Ni/Cu decorated iron oxide for catalytic reduction of 4-nitrophenol

Na+ and Cl- adsorption derived enhancement in 4-nitrophenol reduction using Au/Ag nanoparticle: An experimental and theoretical study