Performance Evaluation of Long Pipe Roof for Tunneling below Existing Highway Based on Field Tests and Numerical Analysis: Case Study

Yufeng Shi,Jinyang Fu,Junsheng Yang,Changjie Xu,Daxin Geng

DOI: https://doi.org/10.1061/(asce)gm.1943-5622.0000933

IF: 3.918

2017-01-01

International Journal of Geomechanics

Abstract:Pipe roof is a commonly used prereinforcing measure for stabilizing tunnel arches during tunneling in portal sections or passing beneath important facilities. This paper presents an investigation on the mechanical performance of a large-scale pipe roof (the pipes are 85 m long and 159 mm in diameter) that was used to prereinforce the surrounding ground and improve the stability of the Shitougang Railway Tunnel, which passes beneath the Hengyang-Kunming Highway in China. Three-dimensional numerical analysis was performed to investigate the mechanical performance of the pipe roof, and the stresses of the pipes were measured in the field using a series of strain gauges. Reasonable agreement was found between the observed field measurements and the numerical results. Such results indicate that the stress distribution of the pipe roof can be divided into three sections: a tension section right near the entrance casing arch, a compressive section behind the tunnel face, and a tension section ahead of the tunnel face. The peak stress values take place approximately at the middle of each section, which varies with the advancement of the tunnel face. This analysis provides a reference for evaluating the mechanical response of the long and large pipe roof in reinforcing shallow tunnel passing below highways. (C) 2017 American Society of Civil Engineers.