Abstract:The electrically assisted forming (EAF) technology can reduce the load & stress and improve the formability of difficult-to-deform alloys due to its coupled thermal and athermal effects. To decouple the two effects and to elucidate each mechanism for deeply understanding and optimizing the EAF processing, we developed an electrothermalmechanical (ETM) macro-meso multiscale model by combing a modified Johnson-Cook (JC) constitutive model with the dislocation density based crystal plasticity finite element (DD-CPFE). The modified JC was used to describe the macroscopic electro-assisted deformation, while the meso-scale DD-CPFE was used to deal with the thermal and athermal effects on the slip rate. Statistically stored dislocations (SSDs) were introduced into the Orowan rate equation to explain the thermal effect part, and the athermal part was reflected through the effect of free energy change on the dislocation motion in the rate equation, due to the collision between free electrons and metallic ions. The simulated results show that the equivalent stress, strain, and dislocation densities are distributed heterogeneously in a meso-scale and sensitive to the current density. Local thermal effect due to geometrically necessary dislocations (GND) exerts no effect on the temperature gradient because of rapid heat conduction between grains. The thermal effect is dominated by the thermal expansion obviously reducing the flow stress in the single-phase and two-phase fields (0 to 70 A/mm 2 ), while the athermal effect is effective in the two-phase field (corresponding to the current density range of 0 to 20 A/mm 2 ) in reducing the flow stress, which is reasonably explained by the change of bonding strength in defect zones, such as grain boundaries, of the HCP structure via the first principle calculations.

High-Temperature United Constitutive Model of Non-Oriented Electrical Steel Based on Transformation Kinetics Equation and Dislocation Density Theory

The Constitutive Model and Threshold Stress for Characterizing the Deformation Mechanism of Al0.3CoCrFeNi High Entropy Alloy

A Unified Constitutive Model for a Low Alloy Steel During Warm Deformation Considering Phase Differences

Constitutive Model for High Temperature Plastic Deformation of Low Carbon Steel

Micromechanical Modeling of Work Hardening for Coupling Microstructure Evolution, Dynamic Recovery and Recrystallization: Application to High Entropy Alloys

Constitutive Modeling of High‐Temperature Deformation Behavior of Nonoriented Electrical Steels as Compared to Machine Learning

Hot Tensile Deformation Behaviors and Constitutive Model of 42crmo Steel

Finite Element Modelling of Tensile Test for Micro-Alloyed Low Carbon Steel at High Temperature

Hot Deformation Behavior and Comparison of Different Constitutive Models of As-Cast ER8 Steel

High Temperature Plastic Deformation Behavior of Non-Oriented Electrical Steel

Constitutive Equation for the Hot Deformation and Microstructure Evolution of 12Cr-F/M Steel

High-temperature tensile characteristics and constitutive models of ultrahigh strength steel

Phenomenological Constitutive Model and Physical Constitutive Model of Hot Deformed Dual-Phase Ti-5Al-4Sn-2Zr-5Mo Alloy

Constitutive Modeling for Elevated Temperature Flow Behavior of 42crmo Steel

High-Temperature Deformation Characteristics and Constitutive Model of an Ultrahigh Strength Steel

Theory and Modeling of Phase Transformations under Stress in Steel

Constitutive Modeling and Dynamic Softening Mechanism During Hot Deformation of an Ultra-Pure 17%cr Ferritic Stainless Steel Stabilized with Nb

Constitutive Model of Warm Deformation Behavior of Medium Carbon Steel

Flow behaviors and constitutive model of 300M high strength steel at elevated temperature

Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension

Phase-based constitutive modeling and experimental study for dynamic mechanical behavior of martensitic stainless steel under high strain rate in a thermal cycle