Abstract:Natural gas/diesel dual-fuel (DF) combustion technology has attracted substantial attention in terms of thermal-efficiency improvement and emission reduction in advanced compression ignition engines. As known, autoignition behavior of DF mixtures plays a significant role in controlling the ignition timing and combustion performance in engines. In the present study, ignition delay time (IDT) measurements of methane/diesel mixtures with three varying diesel substitution ratios (denoted as DSR30, DSR50, and DSR70) were conducted on both a heated rapid compression machine and a heated shock tube under wide-range conditions (T = 640-1450 K, p = 6-20 bar, phi = 0.7, 1.0, and 2.0 in 'air' mixtures). Experimental results show that DF blends exhibit typical two-stage autoignition characteristics along with the negative temperature coefficient (NTC) response at the temperature region currently investigated, owing to the addition of high-reactivity diesel fuel. Moreover, both the total and first-stage IDTs decrease with the rise of pressure and equivalence ratio as well as diesel substitution ratio. Additionally, a crossover of IDTs occurs at a high temperature (similar to 1400 K) for varying equivalence ratios, and there exists a non-linear promoting effect of diesel contents on IDTs. The simulation results performed using a detailed chemical kinetic mechanism (POLIMI_1412) in conjunction with a well-validated tri-component diesel surrogate show generally good agreement with the experimental results at the current test conditions. Furthermore, species evolution assisted with brute-force sensitivity analysis was carried out to further understand the autoignition chemistry of the DF mixture, particularly the chemical interplay between methane and diesel during the low-temperature ignition processes. It is found that methane hardly generates OH radicals, which are mainly produced via the low-temperature oxidation pathways of diesel fuel. The competition between methane and diesel for OH radicals inhibits the consumption of diesel while promotes the depletion of methane, resulting in an inhibiting impact on the overall reactivity of the reaction system. What's more, the experimental data reported herein provide a foundation for the development of DF kinetic models with high accuracy and robustness. (C) 2021 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

An RCM experimental and modeling study on CH4 and CH4/C2H6 oxidation at pressures up to 160 bar

Experiments and Modeling of the Autoignition of Methylcyclohexane at High Pressure

Experiments and Modeling of the Autoignition of Methyl-Cyclohexane at High Pressure

Revisit to the oxidation of CH4 at elevated pressure

An experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure

Experimental and Kinetic Modeling Investigation on Laminar Flame Propagation of CH4/CO Mixtures at Various Pressures: Insight into the Transition from CH4-related Chemistry to CO-related Chemistry

Experimental and modeling study of ignition delay times of n-C5H12 and C3H6 under O2/CO2 atmospheres

An Experimental and Detailed Kinetic Modeling Study of the Auto-Ignition of NH3/diesel Mixtures: Part 2- Wide Pressures Up to 120Bar

Kinetics Modeling of Non-catalytic Partial Oxidation of Natural Gas

An Experimental and Kinetic Modeling Study on Dimethyl Carbonate (dmc) Pyrolysis and Combustion

Methane Oxidation: Experimental and Kinetic Modeling Study

Investigating Auto-Ignition Characteristics and Kinetic Modeling of NH3/CH4 Mixtures Using an RCM

Experimental and Kinetic Study of Methanol Reforming and Methanol-Syngas Co-Oxidation at High Pressure

Analysis of methane pyrolysis experiments at high pressure using available reactor models

Ignition Delay Time Measurements and Kinetic Modeling of Methane/diesel Mixtures at Elevated Pressures

An experimental and kinetic modeling study of premixed nitromethane flames at low pressure

Experimental and modeling study of the ignition kinetics of dimethyl carbonate

Experimental and Modeling High-Pressure Study of Ammonia–Methane Oxidation in a Flow Reactor

Mechanistic insights into the oxidative coupling of methane over Li/MgO catalyst: An experimental and microkinetic modeling study

Detailed kinetic modeling of catalytic oxidative coupling of methane

Comparison of Methane Combustion Mechanisms Using Shock Tube and Rapid Compression Machine Ignition Delay Time Measurements