Conformal Metric Sequences with Integral-Bounded Scalar Curvature

Li Yuxiang,Zhou Zhipeng

DOI: https://doi.org/10.1007/s00209-020-02533-5

2020-01-01

Mathematische Zeitschrift

Abstract:Let (M, g) be a smooth compact Riemiannian manifold without boundary and $$g_k$$ be a metric conformal to g. Suppose $$\text{ vol }(M,g_k)+\Vert R_k\Vert _{L^p(M,g_k)}\frac{n}{2}$$ . We will use the 3-circles theorem to study the bubble tree convergence of $$g_k$$ .

What problem does this paper attempt to address?

Some Dirichlet Problems Arising from Conformal Geometry

Qi-Rui Li,Weimin Sheng

DOI: https://doi.org/10.2140/pjm.2011.251.337

2011-01-01

Pacific Journal of Mathematics

Abstract:We study the problem of finding complete conformal metrics determined by some symmetric function of the modified Schouten tensor on compact manifolds with boundary; which reduces to a Dirichlet problem. We prove the existence of the solution under some suitable conditions. In particular, we prove that every smooth compact n-dimensional manifold with boundary, with n >= 3, admits a complete Riemannian metric g whose Ricci curvature Ric(g) and scalar curvature R-g satisfydet(Ric(g) - R(g)g) = const.This result generalizes Aviles and McOwen's in the scalar curvature case.
Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Weimin Sheng,Lixia Yuan

DOI: https://doi.org/10.1007/s11401-013-0809-5

2014-01-01

Abstract:The authors consider the problem of conformally deforming a metric such that the k-curvature defined by an elementary symmetric function of the eigenvalues of the Bakry-Emery Ricci tensor on a compact manifold with boundary to a prescribed function. A consequence of our main result is that there exists a complete metric such that the Monge-Ampère type equation with respect to its Bakry-Emery Ricci tensor is solvable, provided that the initial Bakry-Emery Ricci tensor belongs to a negative convex cone.
The Structure of Spaces with Bakry–Émery Ricci Curvature Bounded Below

Feng Wang,Xiaohua Zhu

DOI: https://doi.org/10.1515/crelle-2017-0042

2017-01-01

Journal für die reine und angewandte Mathematik (Crelles Journal)

Abstract:In this paper, we explore the limit structure of a sequence of Riemannian manifolds with Bakry-Émery Ricci curvature bounded below in the Gromov-Hausdorff topology. By extending the techniques established by Cheeger-Cloding for Riemannian manifolds with Ricci curvature bounded below, we prove that each tangent space at a point of the limit space is a metric cone. We also analyze the singular structure of the limit space analogous to a work of Cheeger-Colding-Tian. Our results will be applied to study the limit space of a sequence of Kähler metrics arising from solutions of certain complex Monge-Ampère equations for the existence of Kähler-Ricci solitons on a Fano manifold via the continuity method.
Critical Metrics with Cyclic Parallel Ricci Tensor for Volume Functional on Manifolds with Boundary

Weimin Sheng,Lisheng Wang

DOI: https://doi.org/10.1007/s10711-018-0391-9

2019-01-01

Geometriae Dedicata

Abstract:In this paper, we study the critical metrics with cyclic parallel Ricci tensor for volume functional on manifolds with boundary. We show such metric is isometric to a geodesic ball in a simply connected space form $\mathbb {R}^n$, $\mathbb {H}^n$ or $\mathbb {S}^n$ under some extra conditions.
On Positive Scalar Curvature and Moduli of Curves

Kefeng Liu,Yunhui Wu

DOI: https://doi.org/10.4310/jdg/1549422104

2019-01-01

Journal of Differential Geometry

Abstract:In this article we first show that any finite cover of the moduli space of closed Riemann surfaces of genus $g$ with $g\geq 2$ does not admit any Riemannian metric $ds^2$ of nonnegative scalar curvature such that $ds^2 \succ ds_{T}^2$ where $ds_{T}^2$ is the Teichm\"uller metric. Our second result is the proof that any cover $M$ of the moduli space $\mathbb{M}_{g}$ of a closed Riemann surface $S_{g}$ does not admit any complete Riemannian metric of uniformly positive scalar curvature in the quasi-isometry class of the Teichm\"uller metric, which implies a conjecture of Farb-Weinberger.
Compactness of Conformal Metrics with Integral Bounds on Ricci Curvature

Conghan Dong,Yuxiang Li

DOI: https://doi.org/10.2140/pjm.2022.316.65

2022-01-01

Pacific Journal of Mathematics

Abstract:Let (M, g) be a closed Riemannian manifold with dimension n > 2, and {g(k) = u(k)4/(n-2)g} be a noncollapsing conformal metric sequence with fixed volume. We prove that flog ukg is compact in (CM)-M-0,alpha() if parallel to Ric(g(k))parallel to L-p(M, g(k)) is bounded, where p > n/2.
Weak limits of Riemannian metrics in surfaces with integral curvature bound

Xiuxiong Chen

DOI: https://doi.org/10.1007/s005260050089

1998-01-01

Calculus of Variations and Partial Differential Equations

Abstract:In this paper, we study the weak compactness of the set of conformal metrics in any Riemann surface without boundary whose Calabi energy and area are uniformly bounded. We prove that for any sequence of such metrics, there alwasy exists a subsequence which converges in H\sp{2,2}_\sb{loc} everywhere except a finite number of bubble points. Blowup analysis near bubble shows that the bubble on bubble phenomenon occurs. The limit metric gives rise to a tree structure decomposition, where each node in the tree represents a limit metric of a subsequence at that stage while the edge of the tree structure represents the neck on the process of blowing up. We also show that the number of the nodes which have more than three edges attached is finite.
Conformal metrics of constant scalar curvature with unbounded volumes

Liuwei Gong,Yanyan Li

2024-06-11

Abstract:For $n\geq 25$, we construct a smooth metric $\tilde{g}$ on the standard $n$-dimensional sphere $\mathbb{S}^n$ such that there exists a sequence of smooth metrics $\{\tilde{g}_k\}_{k\in\mathbb{N}}$ conformal to $\tilde g$ where each $\tilde g_k$ has scalar curvature $R_{\tilde{g}_k}\equiv 1$ and their volumes $\text{Vol}(\mathbb{S}^n,\tilde{g}_k)$ tend to infinity as $k$ approaches infinity.

Analysis of PDEs,Differential Geometry
Metrics on A Surface with Bounded Total Curvature

Yuxiang Li,Jianxin Sun,Hongyan Tang

DOI: https://doi.org/10.1093/imrn/rnab089

2021-01-01

International Mathematics Research Notices

Abstract:Let g = e(2u)g(euc) be a conformal metric defined on the unit disk of C. We give an estimate of parallel to del u parallel to(L2,infinity(D1/2)) when parallel to K(g)parallel to(L1) is small and mu(B-r(g)(z),g)/pi r(2) < Lambda for any r and z is an element of D-43. Then we use this estimate to study the Gromov-Hausdorff convergence of a conformal metric sequence with bounded parallel to K parallel to(L1) and give some applications.
Conformal Tori with Almost Non-Negative Scalar Curvature

Jianchun Chu,Man-Chun Lee

DOI: https://doi.org/10.1007/s00526-022-02220-9

2022-01-01

Calculus of Variations and Partial Differential Equations

Abstract:In this work, we consider sequence of metrics with almost non-negative scalar curvature on torus. We show that if the sequence is uniformly conformal to another sequence of metrics with bounded Ricci geometry, then it converges to a flat metric in the volume preserving intrinsic flat sense, the measured Gromov-Hausdorff sense and L-p sense. Moreover, similar stability also holds on manifolds with non-positive Yamabe invariant.
Prescribing curvatures on three dimensional Riemannian manifolds with boundaries

Lei Zhang

DOI: https://doi.org/10.48550/arXiv.0810.5027

2008-10-28

Abstract:Let $(M,g)$ be a complete three dimensional Riemannian manifold with boundary $\partial M$. Given smooth functions $K(x)>0$ and $c(x)$ defined on $M$ and $\partial M$, respectively, it is natural to ask whether there exist metrics conformal to $g$ so that under these new metrics, $K$ is the scalar curvature and $c$ is the boundary mean curvature. All such metrics can be described by a prescribing curvature equation with a boundary condition. With suitable assumptions on $K$,$c$ and $(M,g)$ we show that all the solutions of the equation can only blow up at finite points over each compact subset of $\bar M$, some of them may appear on $\partial M$. We describe the asymptotic behavior of the blowup solutions around each blowup point and derive an energy estimate as a consequence.

Differential Geometry,Analysis of PDEs
Compactness of sequences of warped product circles over spheres with nonnegative scalar curvature

Wenchuan Tian,Changliang Wang

2023-10-04

Abstract:Gromov and Sormani conjectured that a sequence of three dimensional Riemannian manifolds with nonnegative scalar curvature and some additional uniform geometric bounds should have a subsequence which converges in some sense to a limit space with generalized notion of nonnegative scalar curvature. In this paper, we study the pre-compactness of a sequence of three dimensional warped product manifolds with warped circles over standard $\mathbb{S}^2$ that have nonnegative scalar curvature, a uniform upper bound on the volume, and a positive uniform lower bound on the MinA, which is the minimum area of closed minimal surfaces in the manifold. We prove that such a sequence has a subsequence converging to a $W^{1, p}$ Riemannian metric for all $p<2$, and that the limit metric has nonnegative scalar curvature in the distributional sense as defined by Lee-LeFloch.

Differential Geometry
An Extreme Limit with Nonnegative Scalar Curvature

Christina Sormani,Wenchuan Tian,Changliang Wang

2023-04-14

Abstract:In 2014, Gromov vaguely conjectured that a sequence of manifolds with nonnegative scalar curvature should have a subsequence which converges in some weak sense to a limit space with some generalized notion of nonnegative scalar curvature. The conjecture has been made precise at an IAS Emerging Topics meeting: requiring that the sequence be three dimensional with uniform upper bounds on diameter and volume, and a positive uniform lower bound on MinA, which is the minimum area of a closed minimal surface in the manifold. Here we present a sequence of warped product manifolds with warped circles over standard spheres, that have circular fibres over the poles whose length diverges to infinity, that satisfy the hypotheses of this IAS conjecture. We prove this sequence converges in the $W^{1,p}$ sense for $p<2$ to an extreme limit space that has nonnegative scalar curvature in the distributional sense as defined by Lee-LeFloch and that the total distributional scalar curvature converges. This paper only requires expertise in smooth Riemannian Geometry, smooth minimal surfaces, and Sobolev Spaces. In a second paper, requiring expertise in metric geometry, the first two authors prove intrinsic flat and Gromov-Hausdorff convergence of our sequence to this extreme limit space and investigate its geometric properties.

Differential Geometry
Diffeomorphisms as Symplectomorphisms in History Phase Space: Bosonic String Model

Ioannis Kouletsis,Karel. V. Kuchar

DOI: https://doi.org/10.1103/PhysRevD.65.125026

2001-08-09

Abstract:The structure of the history phase space $\cal G$ of a covariant field system and its history group (in the sense of Isham and Linden) is analyzed on an example of a bosonic string. The history space $\cal G$ includes the time map $\sf T$ from the spacetime manifold (the two-sheet) $\cal Y$ to a one-dimensional time manifold $\cal T$ as one of its configuration variables. A canonical history action is posited on $\cal G$ such that its restriction to the configuration history space yields the familiar Polyakov action. The standard Dirac-ADM action is shown to be identical with the canonical history action, the only difference being that the underlying action is expressed in two different coordinate charts on $\cal G$. The canonical history action encompasses all individual Dirac-ADM actions corresponding to different choices $\sf T$ of foliating $\cal Y$. The history Poisson brackets of spacetime fields on $\cal G$ induce the ordinary Poisson brackets of spatial fields in the instantaneous phase space ${\cal G}_{0}$ of the Dirac-ADM formalism. The canonical history action is manifestly invariant both under spacetime diffeomorphisms Diff$\cal Y$ and temporal diffeomorphisms Diff$\cal T$. Both of these diffeomorphisms are explicitly represented by symplectomorphisms on the history phase space $\cal G$. The resulting classical history phase space formalism is offered as a starting point for projection operator quantization and consistent histories interpretation of the bosonic string model.

General Relativity and Quantum Cosmology
On the Scalar Curvature Compactness Conjecture in the Conformal Case

Brian Allen,Wenchuan Tian,Changliang Wang

2024-06-06

Abstract:Is a sequence of Riemannian manifolds with positive scalar curvature, satisfying some conditions to keep the sequence reasonable, compact? What topology should one use for the convergence and what is the regularity of the limit space? In this paper we explore these questions by studying the case of a sequence of Riemannian manifolds which are conformal to the $n$-dimensional round sphere. We are able to show that the sequence of conformal factors are compact in several analytic senses and are able to establish $C^0$ convergence away from a singular set of small volume in a similar fashion as C. Dong. Under a bound on the total scalar curvature we are able to show that the limit conformal factor has weak positive scalar curvature in the sense of weakly solving the conformal positive scalar curvature equation.

Differential Geometry
W1,p-metrics and Conformal Metrics with Ln/2-bounded Scalar Curvature

Conghan Dong,Yuxiang Li,Ke Xu

DOI: https://doi.org/10.1142/s0219199721500474

2021-01-01

Communications in Contemporary Mathematics

Abstract:A [Formula: see text]-metric on an n-dimensional closed Riemannian manifold naturally induces a distance function, provided p is sufficiently close to n. If a sequence of metrics [Formula: see text] converges in [Formula: see text] to a limit metric [Formula: see text], then the corresponding distance functions [Formula: see text] subconverge to a limit distance function d, which satisfies [Formula: see text]. As an application, we show that the above convergence result applies to a sequence of conformal metrics with [Formula: see text]-bounded scalar curvatures, under certain geometric assumptions. In particular, in this special setting, the limit distance function d actually coincides with [Formula: see text].
Integral of Scalar Curvature on Non-parabolic Manifolds

Guoyi Xu

DOI: https://doi.org/10.1007/s12220-019-00174-7

2019-01-01

Journal of Geometric Analysis

Abstract:Using the monotonicity formulas of Colding and Minicozzi, we prove that on any complete, non-parabolic Riemannian manifold (M3,g) with non-negative Ricci curvature, the asymptotic- weighted scaling invariant integral of scalar curvature has an explicit bound in the form of asymptotic volume ratio.
Metric limits of manifolds with positive scalar curvature

Man-Chun Lee,Peter M. Topping

2024-11-18

Abstract:We show that any Riemannian metric conformal to the round metric on $S^n$, for $n\geq 4$, arises as a limit of a sequence of Riemannian metrics of positive scalar curvature on $S^n$ in the sense of uniform convergence of Riemannian distance. In particular, non-negativity of scalar curvature is not preserved under such limits.

Differential Geometry,Metric Geometry
Isoperimetry, Scalar Curvature, and Mass in Asymptotically Flat Riemannian 3-Manifolds

Otis Chodosh,Michael Eichmair,Yuguang Shi,Haobin Yu

DOI: https://doi.org/10.1002/cpa.21981

2021-01-01

Communications on Pure and Applied Mathematics

Abstract:Let $(M, g)$ be an asymptotically flat Riemannian $3$-manifold with non-negative scalar curvature and positive mass. We show that each leaf of the canonical foliation through stable constant mean curvature surfaces of the end of $(M, g)$ is uniquely isoperimetric for the volume it encloses.
Scalar Curvature and Singular Metrics

Yuguang Shi,Luen-Fai Tam

DOI: https://doi.org/10.2140/pjm.2018.293.427

2018-01-01

Pacific Journal of Mathematics

Abstract:Let M-n, n >= 3, be a compact differentiable manifold with nonpositive Yamabe invariant sigma(M). Suppose g(0) is a continuous metric with volume V (M, g(0)) = 1, smooth outside a compact set Sigma, and is in W-loc(1,p) for some p > n. Suppose the scalar curvature of g(0) is at least sigma(M) outside Sigma. We prove that g(0) is Einstein outside Sigma if the codimension of Sigma is at least 2. If in addition, g(0) is Lipschitz then g(0) is smooth and Einstein after a change of the smooth structure. If Sigma is a compact embedded hypersurface, g(0) is smooth up to Sigma from two sides of Sigma, and if the difference of the mean curvatures along Sigma at two sides of Sigma has a fixed appropriate sign, then g(0) is also Einstein outside Sigma. For manifolds with dimension between 3 and 7, without a spin assumption we obtain a positive mass theorem on an asymptotically flat manifold for metrics with a compact singular set of codimension at least 2.

Conformal Metric Sequences with Integral-Bounded Scalar Curvature

Some Dirichlet Problems Arising from Conformal Geometry

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

The Structure of Spaces with Bakry–Émery Ricci Curvature Bounded Below

Critical Metrics with Cyclic Parallel Ricci Tensor for Volume Functional on Manifolds with Boundary

On Positive Scalar Curvature and Moduli of Curves

Compactness of Conformal Metrics with Integral Bounds on Ricci Curvature

Weak limits of Riemannian metrics in surfaces with integral curvature bound

Conformal metrics of constant scalar curvature with unbounded volumes

Metrics on A Surface with Bounded Total Curvature

Conformal Tori with Almost Non-Negative Scalar Curvature

Prescribing curvatures on three dimensional Riemannian manifolds with boundaries

Compactness of sequences of warped product circles over spheres with nonnegative scalar curvature

An Extreme Limit with Nonnegative Scalar Curvature

Diffeomorphisms as Symplectomorphisms in History Phase Space: Bosonic String Model

On the Scalar Curvature Compactness Conjecture in the Conformal Case

W1,p-metrics and Conformal Metrics with Ln/2-bounded Scalar Curvature

Integral of Scalar Curvature on Non-parabolic Manifolds

Metric limits of manifolds with positive scalar curvature

Isoperimetry, Scalar Curvature, and Mass in Asymptotically Flat Riemannian 3-Manifolds

Scalar Curvature and Singular Metrics