Abstract:Direct numerical simulation of open-channel flow over a bed of spheres arranged in a regular pattern has been carried out at bulk Reynolds number and roughness Reynolds number (based on sphere diameter) of approximately 6900 and 120, respectively, for which the flow regime is fully-rough. The open-channel height was approximately 5.5 times the diameter of the spheres. Extending the results obtained by Chan-Braun et al. (J. Fluid Mech., vol. 684, 2011, 441) for an open-channel flow in the transitionally-rough regime, the present purpose is to show how the flow structure changes as the fully-rough regime is attained and, for the first time, to enable a direct comparison with experimental observations. The results indicate that, in the vicinity of the roughness elements, the average flow field is affected both by Reynolds number effects and by the geometrical features of the roughness, while at larger wall-distances this is not the case, and roughness concepts can be applied. The flow-roughness interaction occurs mostly in the region above the virtual origin of the velocity profile, and the effect of form-induced velocity fluctuations is maximum at the level of sphere crests. The spanwise length scale of turbulent velocity fluctuations in the vicinity of the sphere crests shows the same dependence on the distance from the wall as that observed over a smooth wall, and both vary with Reynolds number in a similar fashion. Moreover, the hydrodynamic force and torque experienced by the roughness elements are investigated. Finally, the possibility either to adopt an analogy between the hydrodynamic forces associated with the interaction of turbulent structures with a flat smooth wall or with the surface of the spheres is also discussed, distinguishing the skin-friction from the form-drag contributions both in the transitionally-rough and in the fully-rough regimes.

Simple Modification of Manning-Strickler Formula for Large-Scale Roughness

Resistance Coefficients for Artificial and Natural Coarse-Bed Channels: Alternative Approach for Large-Scale Roughness

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Pressure-balanced Saint–Venant Equations for Improved Asymptotic Modelling of Pipe Flow

Resistance coefficient for large-scale roughness with seepage through porous bed

A multi-state description of roughness effects in turbulent pipe flow

With Modified Prandtl Friction Law

Modeling of Surface Roughness Effects on Stokes Flow in Circular Pipes

Evaluation of Flow Resistance in Smooth Rectangular Open Channels with Modified Prandtl Friction Law

New Formulation for the Effective Relative Roughness Height of Open Channel Flows with Submerged Vegetation

Flow Resistance in Smooth Rectangular Open Channels with Low Aspect Ratios

Formulas for Friction Factor in Transitional Regimes

Modified Manning Formula for Flow in Alluvial Channels with Sand-Beds

Representative Roughness Height Of Submerged Vegetation

Deviation of Permeable Coarse‐grained Boundary Resistance from Nikuradse's Observations

A unified friction factor formulation: Bridging laminar and turbulent friction factor with critical points analysis

New formula of vegetation roughness height and Darcy–Weisbach friction factor in channel flow

Effects of Structured Roughness on Fluid Flow at the Microscale Level

Experimental Study Of Manning'S Roughness In Sparse Planted Open Channel Flow

Critical Hydraulic Gradient of Piping Erosion Under Free Flow and Seepage Flow Coupling Model

Direct numerical simulation of open-channel flow over a fully-rough wall at moderate relative submergence