Abstract:Mechanical behaviors of a Ni-based single crystal superalloy have been investigated by tensile testing at various temperatures. Deformation substructures and mechanisms have been systemically revealed from micrometer to atomic scales by using advanced scanning electron and scanning transmission electron microscopes. Results show that deformation mode of the alloy strongly depends on the temperature due to competitive responses of the gamma and gamma' phases under mechanical loading and their original stress statuses. At temperatures from ambient to 750 degrees C, plasticity is governed by dislocation shearing in both phases, where slip modes of gamma are < 110 >{111} and those of gamma' are < 112 >{111}, < 110 >{111} and < 110 > {001}. At moderate temperatures (850 degrees C <= T <= 900 degrees C), plasticity mainly involves microscopically uniform deformation of both phases. The matrix deforms first so that channels parallel to tensile direction are narrowed due to the Poisson's effect, after that deformation of gamma' follows. The active slip modes are < 110 > {111} for gamma, < 112 >{111}, < 110 >{111}, < 110 >{001}, and < 001 >{001} for gamma'. At temperature higher than 1000 degrees C, plastic strain is also derived from deformation of both phases, but deformation of the matrix plays critical roles, due to relatively weak strength of this phase. The operative slip modes are < 110 > {111} for gamma, but mainly < 110 >{001} and < 001 >{001} for gamma'. Our results clearly provide a comprehensive and multiscale (from micrometer to atomic) understanding on the deformation mechanism of Ni-based superalloys, which can be critically beneficial and offer mechanistic guidelines to design new/next generation superalloys. (c) 2021 Elsevier Ltd. All rights reserved.

Temperature Dependence of Nickel Ion Irradiation Damage in GH3535 Alloy Weld Metal

The Irradiation Effects on the Nanoindentation Hardness and Helium Bubbles Evolution Mechanism of Ni-based Alloy

Direct Observation of Defect Range and Evolution in Ion-Irradiated Single Crystalline Ni and Ni Binary Alloys

Microstructure and micromechanical responses of bulk nanostructured high entropy alloy after heavy-ion irradiation at 500°C

Structural Damage and Phase Stability of Al0.3CoCrFeNi High Entropy Alloy under High Temperature Ion Irradiation

Characterization of microstructure and hardening of SLM nickel-based alloy irradiated by He ions

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Microstructure Characterization and Small Punch Test Analysis in Nickel-Based Alloy 617 by High Energy Neon Implantation

Characterising Ion-Irradiated FeCr: Hardness, Thermal Diffusivity and Lattice Strain

Dislocation loop evolution and radiation hardening in nickel-based concentrated solid solution alloys

High radiation tolerance of an ultrastrong nanostructured NiCoCr alloy with stable dispersed nanooxides and fine grain structure

Nanoindentation Test of Ion-Irradiated Materials: Issues, Modeling and Challenges

Radiation Damage of 1cr18ni9ti and Zr-Ti-Al Alloys Due to Energetic Particle Irradiation

Effect of Post-irradiation Annealing on Microstructure Evolution and Hardening in GH3535 Alloy Irradiated by Au Ions

Effects of Temperature on the Irradiation Responses of Al 0.1 CoCrFeNi High Entropy Alloy

The effects of post-irradiation isochronous annealing on defects evolution and hardening in Hastelloy N alloy

Revealing the Temperature-Dependent Hardening Mechanisms of Non-Uniformly Distributed Defects for Ion-Irradiated Metals: Experiments and Modeling

Effect of Temperature on Foreign Object Damage Characteristics and High Cycle Fatigue Performance of Nickel-Based Superalloy GH4169

Helium ion irradiation-induced damage of powder metallurgy-hot isostatic pressed Ni-based alloy GH3535 for molten salt reactor applications

He ion irradiation resistance of W-Ni-Fe alloys with variable Ni and Fe concentrations

Microstructural and Mechanical Properties of Nitrogen Ion Irradiated 316 Stainless Steel