Abstract:The management of global carbon dioxide (CO2) emissions is considered one of the main environmental problems facing the modern world. One of the potential techniques for CO2 capture is absorption, using membrane contactor modules. Most of the previous research that dealt with membrane contactor simulations considered the whole membrane surface as the active reaction surface. However, in this paper, a more realistic model of the membrane-contactor module is presented, taking into account the effects of the pore size and surface porosity. CO2 absorption into the monoethanolamine (MEA) solution in hollow fiber membrane-contactor modules was numerically investigated. A computational fluid dynamics simulation was established using essential basic fluid dynamics and mass transfer equations in reactive mode. An algorithmic function was used to present the relations between the CO2 absorption flux and the hollow fiber length, membrane surface pore size, and porosity. The simulation results were compared to previously obtained experimental results without using any fitting parameters, and a good agreement was found with an average error of 8.5%. The validated simulation was then used to predict the effects of the MEA inlet velocity and concentration, the membrane surface pore size, and porosity on the total CO2 absorption flux. A maximum absorption flux of about 1.8 mol/m2. s was achieved at an MEA concentration of 4 M with a pore size of 0.2 microns, a surface porosity of 1%, and an inlet velocity of 0.25 m/s. The extrapolation technique was then used to predict the values of the absorption flux at longer fiber lengths. The concentration profiles around the pores at the gas–liquid contact surface of the membrane were obtained and presented. The proposed model exhibited excellent potential to evaluate the effective reaction surface in hollow fiber membrane contactors. This model could be considered the first step to obtaining accurate predictions of the membrane contactor gas absorption performance based on its surface structure.

Mathematical Modeling and Validation of CO2 Mass Transfer in a Membrane Contactor Using Ionic Liquids for Pre-Combustion CO2 Capture

Modelling of A Tubular Membrane Contactor for Pre-Combustion Co2 Capture Using Ionic Liquids: Influence of the Membrane Configuration, Absorbent Properties and Operation Parameters

Modeling pre-combustion CO2 capture with tubular membrane contactor using ionic liquids at elevated temperatures

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

3D Models Guide the Design of Hollow Fiber Membrane Contactors with Complex Internal Structures for CO2 Capture

Simulations of solute concentration profile and mass transfer behavior near the membrane surface with finite volume method

Experimental Measurement and Modeling Prediction of Mass Transfer in a Hollow Fiber Membrane Contactor Using Tertiary Amine Solutions for CO2 Absorption

A Multicomponent Counter-Current Flow Model for Simulating Water and Oxygen Effects on Membrane Contactor Co2 Removal and Case Study of Hollow Fiber Membrane Contactor

Mathematical Modeling of High-Temperature Multiphase Solid/Molten Carbonate Membranes for CO 2 Capture

Modeling and Experimental Study of Carbon Dioxide Absorption in a Flat Sheet Membrane Contactor

CO2 capture in a hollow fiber membrane contactor coupled with ionic liquid: Influence of membrane wetting and process parameters

Simulation Assessment of Inlet Parameters and Membrane-Surface-Structure Effects on CO2 Absorption Flux in Membrane Contactors

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Rigorous non-isothermal modeling approach for mass and energy transport during CO2 absorption into aqueous solution of amino acid ionic liquids in hollow fiber membrane contactors

Experimental and Numerical Analysis for Improving CO2 Mass Transfer Performance in Hollow Fiber Membrane Contactors

Development of a multicomponent counter‐current flow model to evaluate the impact of oxygen and water vapor on CO2 removal performance in a hollow fiber membrane contactor

Numerical Study on Absorption of Carbon Dioxide and Mass Transfer Performance in Hollow Fiber Membrane Contactor

Modeling and Simulation of the Impact of Feed Gas Perturbation on CO2 Removal in a Polymeric Hollow Fiber Membrane

Precombustion Co2 Capture in Polymeric Hollow Fiber Membrane Contactors Using Ionic Liquids: Porous Membrane Versus Nonporous Composite Membrane

Membrane absorption using ionic liquid for pre-combustion CO2 capture at elevated pressure and temperature

Modeling of CO2 Stripping in a Hollow Fiber Membrane Contactor for CO2 Capture