Abstract:Herein, enhanced exfoliation and large-scale delamination of two-dimensional (2D) Ti3C2Tx MXene using etchant of HCl + LiF, instead of HF, in which both etching and intercalation were achieved in exfoliation process, were thoroughly investigated with the focus on the effects of two critical factors, reaction temperature and washing solution. Increasing etching temperature promotes the exfoliation process, i.e., the transformation from Ti3AlC2 to multilayer Ti3C2Tx MXene, whereas simultaneously results in an aggravated surface oxidation of MXene layers formed after the extraction of Al. As a result, delamination ratio increases firstly and then decreases, and the samples etched at 35 degrees C show the highest delamination ratio. Compared with the distilled water, washing the exfoliation products using ethanol significantly improves the delamination ratio of Ti3C2Tx MXene by co-intercalation of larger alcohol molecule and more impurity ions and a large scale delamination of Ti3C2Tx MXene with a delamination ratio as high as 29.2% was obtained by simple sonication for 1 h, without additional intercalation step required, after washing using ethanol. The possible exfoliation reactions by HCl +\ LiF solution were proposed. Using the as-fabricated stable suspensions of delaminated Ti3C2Tx flakes, flexible, free-standing Ti3C2Tx papers with tailored thickness, hydrophilic surface and excellent conductivity, typically 2 x 10(5) S/m at 5 mm in thickness, were prepared. As anode for lithium ion batteries, the delaminated Ti3C2Tx MXene obtained reversible capacities of 226.3 mAh g(-1), 137.9 mAh g(-1),102.0 mAh g(-1) and 47.9 mAh g(-1) respectively at the current density of 100, 300, 1000 and 3000 mA g(-1), which are superior to those of the Ti3C2 MXene prepared by conventional HF process. (C) 2016 Elsevier B.V. All rights reserved.

Ti-enhanced Exfoliation of V2AlC into V2C MXene for Lithium-Ion Battery Anodes

Atomically selective oxidation of (Ti,V) MXene to construct TiO2@TiVCT heterojunction for high-performance Li-ion batteries

Atomically Selective Oxidation of (ti,v) MXene to Construct TiO2@TiVCTx Heterojunction for High-Performance Li-ion Batteries

In-situ Partial Oxidation of TiVCTx Derived TiO2 and V2O5 Nanocrystals Functionalized TiVCTx MXene As Anode for Lithium-Ion Batteries

Controlled Synthesis of Alkalized Ti3C2 MXene-supported Β-Feooh Nanoparticles As Anodes for Lithium-Ion Batteries

Preparation of (Vx, Ti1−x)2C MXenes and their performance as anode materials for LIBs

A facile preparation of submicro-sized Ti2AlC precursor toward Ti2CTx MXene for lithium storage

Preparation of (V X , Ti 1− X ) 2 C MXenes and Their Performance As Anode Materials for LIBs

Composite of Two-Dimensional Titanium Carbonitride Mxene and Nano-Sulfur As Cathode for Li-S Batteries

Effect of Synthesis Temperature on the Phase Structure, Morphology and Electrochemical Performance of Ti3C2 As an Anode Material for Li-ion Batteries

Preparation of High-Purity V2C MXene and Electrochemical Properties As Li-Ion Batteries

Effective Improvement of Lithium-Ion Battery Anode Performance of Ti3C2 by Alkali Metal Ion Treatment Strategy

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Synthesis of Two-Dimensional Ti3C2Tx MXene Using HCl+LiF Etchant: Enhanced Exfoliation and Delamination

Polarized nucleation and efficient decomposition of Li2O2 for Ti2C MXene cathode catalyst under a mixed surface condition in lithium-oxygen batteries

Two-dimensional composite of D-Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i>@S@TiO<sub>2</sub> (MXene) as the cathode material for aluminum-ion batteries

Synthesis of Ti3C2Fx MXene with controllable fluorination by electrochemical etching for lithium-ion batteries applications

Double transition metal MXene (TixTa4−xC3) 2D materials as anodes for Li-ion batteries

One-Step Incorporation of Nitrogen and Vanadium Between Ti3C2Tx MXene Interlayers Enhances Lithium Ion Storage Capability

Understanding the Lithium Storage Mechanism of Ti3C2TX MXene

Improving the Electrochemical Properties of MXene Ti 3 C 2 Multilayer for Li-ion Batteries by Vacuum Calcination