Abstract:One of the significant factors contributing to high energy consumption is the unutilized waste heat from flue gas in industrial boilers. Thermoelectric generator (TEG) technology can directly convert thermal energy into electrical energy, and has been gradually applied in the field of waste heat recovery due to its simple and reliable structure, environmental protection, and other advantages. In this paper, a thermoelectric generator simulation system of boiler flue gas waste heat is proposed. The experimental platform is designed by simulating the flue gas waste heat temperature condition of boiler, and the structure of cold end module and hot end module is optimized. During the experiment, the fixed temperature difference was set at 120 °C (hot end:150 °C~cold end: 30 °C). An analysis is conducted on the volt-ampere characteristics and output power of the TEG module. The output characteristics of the TEG system are analyzed under the conditions of variable load, constant load, different pump speed, different heat dissipation modes, and series and parallel connection method. The results show that the experimental platform can instantaneously and accurately test the output parameters of the TEG system, and ensure the intended design requirements. When the ratio of the load resistance to the internal resistance of the TEG module is approximately 1–1.15, the output power of the system reaches its maximum. In order to optimize the output power of the TEG system, a power prediction-based adaptive variable step size maximum power point tracking (MPPT) algorithm is introduced. Additionally, a corresponding mathematical model is formulated. Simulations demonstrate that the time of the improved algorithm to reach the stable maximum power point is 1.54 s faster than that of the traditional algorithm. The improved MPPT algorithm satisfies the criteria for speed and accuracy, diminishes superfluous energy waste, and enhances the overall system efficiency. The research results have certain guiding significance for the design and application of subsequent TEG system.

Performance Improvement of High-temperature Silicone Oil Based Thermoelectric Generator

Multiphysics Co-Simulation and Experimental Study of Deep-Sea Hydrothermal Energy Generation System

Liquid Metal Based Thermoelectric Generation System for Waste Heat Recovery

Power generation of annular thermoelectric generator with silicone polymer thermal conductive oil applied in automotive waste heat recovery

Wearable Thermoelectric Generator with Copper Foam As the Heat Sink for Body Heat Harvesting

Experimental study on thermoelectric characteristics of intermediate fluid thermoelectric generator

An experimental study on the performance of TEGs using uniform flow distribution heat exchanger for low-grade thermal energy recovery

The Impact of the Heat Leakage Through Air Gap on Thermoelectric Generator Applied in Engine Waste Heat Recovery

Performance evaluation and improvement of thermoelectric generators (TEG): Fin installation and compromise optimization

Efficiency Enhancement in Ocean Thermal Energy Conversion: A Comparative Study of Heat Exchanger Designs for Bi2Te3-Based Thermoelectric Generators

Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery

Performance of a thermoelectric generator system for waste heat recovery utilizing plate fin heat sink in bronze ingot casting industry

Design and Research of Thermoelectric Generator Simulation System for Boiler Flue Gas Waste Heat

Study of Thermal Insulation Materials Influence on the Performance of Thermoelectric Generators by Creating a Significant Effective Temperature Difference

Analyzing and optimizing the power generation performance of thermoelectric generators based on an industrial environment

Heat Transfer Characteristics of Thermoelectric Generator System for Waste Heat Recovery from a Billet Casting Process: Experimental and Numerical Analysis

Design of Bi2Te3-based thermoelectric generator in a widely applicable system

Optimization Design of an Intermediate Fluid Thermoelectric Generator for Exhaust Waste Heat Recovery

Improving the ability of thermoelectric generators to absorb industrial waste heat through three-dimensional structure optimization

Comparison and Parametric Analysis of Thermoelectric Generator System for Industrial Waste Heat Recovery with Three Types of Heat Sinks: Numerical Study

Experiments on Waste Heat Thermoelectric Generation for Passenger Vehicles