Abstract:Freeze-drying is an indispensible drying method for preserving original properties of the material of interest. Rigorous determination for the transitional point that distinguishes the primary drying stage from the secondary drying stage is very important for quality control of product owing to different adaptive strategies in operation imposed in the two stages Therefore, better understanding the evolution of the temperature profiles and the phase distributions during drying becomes an essential part of determining an end point of the primary drying stage. The primary objective of this work is to probe the evolution of the temperature profiles and the phase distributions during the primary drying stage in a microscopic point of view. A pore-scale network model of freeze-drying with coupled heat and mass transfer was developed, in which mass balance and energy balance equations were solved simultaneously on two sets of square lattice pore-throat network incorporated with the pore size distribution of the material of interest. Numerical simulations show that the drying curve predicted by the present model agrees well with the experimental data during the primary drying stage. The effects of network size and time step on simulations were studied in this paper. It shows that reducing the time step and enlarging the network size in the simulation leads to the improvement of the accuracy of the model at the expense of heavy computation efforts. Therefore, it is important to select the size of the network and the time step in the simulation properly. The simulation results also show that the model is capable of capturing the characteristics of the temperature profiles and the phase distributions at the pore level. The pore scale network model for freeze-drying will provide insight into the quality control of products and the risk avoidance of drying failure theoretically.

Relative Permeability Effect on Vacuum Drying Process of Porous Material Modeling

Capillary pressure effect on vacuum drying process of porous medium modeling

Estimation of the Drying Process in Porous Media Using the Parallel and Series Moitrue Transfer Model

Conjugate Modeling of Flow and Simultaneous Heat and Mass Transfer in Convective Drying of Porous Substances

Permeation of Compressed and Supercritical Fluids Through Porous Membranes

Effect of Thermophysical Properties on Coupled Heat and Mass Transfer in Porous Material during Forced Convective Drying

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Numerical modeling of drying from saturated to unsaturated conditions with two-phase partitioning boundaries at the medium surface and interface-dependent phase change

Effect of heat and mass transfer coefficients on force convective drying of porous media

Probe into the adaptability of local equilibrium/non-equilibrium assumptions in simulating freeze-drying of porous media

Numerical Simulation of Porous Media Convective Drying

Multiphase Transport Modeling for Freeze-Drying of Aqueous Material Frozen with Prebuilt Porosity

Multiphysics Modeling of Water Transport in High-Intensity Lignite Drying Process on Porescale

Cfd Modeling Of Moisture Transfer In Porus Material Subject To Dynamic Change Of Boundary Temperature

MICROSCOPIC DETERMINATION OF TRANSPORT PARAHETERS IN DRYING POROUS MEDIA

Simulation investigation of the effect of heating temperature and porosity of porous media on the water evaporation process

Two-Dimensional Mathematical Modeling of Heat and Mass Transfer in Fluidized-Bed Drying of Porous Material

Effect of thermophysical properties on forced convective hot air drying of multi-layered porous materials

Flow and Heat Mass Performances of Wet Particle Drying Process Based on Liquid Volume-Varying Bridge Force

Impact of thermal gradients on phase distributions during freeze-drying: Numerical simulations through pore-scale network modeling

Simulation and experimental study of heat-moisture-solute transfer during drying process of porous media