Abstract:To investigate structural changes, the Cu95Fe5 alloy system was subjected to cooling rates of 1 × 1013 K/s, 2 × 1012 K/s, 2 × 1011 K/s, and 2 × 1010 K/s using the molecular dynamics simulation method. The results revealed that decreasing the cooling rate caused an increase in the phase transition temperature. Further, the structure of the alloy system exhibited a tendency towards increased stability following cooling at lower cooling rates. The Fe precipitation behavior of the Cu95Fe5 alloys during cooling at the rate of 2 × 1010 K/s was further explored, with the results suggesting that the formation and growth of the Fe cluster is a continuous process governed by the nucleation and growth mechanism. The size and number of Fe clusters formed at different stages were found to be affected by three factors, namely, the interaction force between the Fe atoms, the diffusion ability of the Fe atoms, and the interfacial energy between the Fe cluster and Cu matrix. When the alloy temperature exceeded 1400 K, the accumulation of the Fe atoms was facilitated by their strong interaction. However, the high temperatures and the large diffusion coefficient of the Fe atoms acted as inhibitors to the growth of Fe clusters, despite the intense thermal activities. As the temperature was reduced from 1400 K to 1050 K, the Fe atoms moved with a reduced intensity in a narrower area, and both the number of Fe atoms in the largest cluster and the number of clusters increased due to the action of the interaction force between the Fe atoms. Upon lowering the temperature from 1050 K to 887 K, the size of the largest Fe cluster increased rapidly, while the number of clusters decreased gradually. The growth of the largest Fe cluster could be partly attributed to the diffusion of single Fe atoms into the cluster under the action of the interaction force between the Fe atoms, in addition to the gathering and combination of multiple clusters. When the temperature was lowered from 967 K to 887 K, the diffusion coefficient of the Fe atoms approached 0, indicating that the non-diffusive local structure rearrangements of atoms dominated in the system structure change process. The interface energy governed the combination of the Fe clusters in this stage. At a temperature below 887 K, the alloy crystallized, the activities of the Fe atoms were reduced due to a low temperature, and the movement range of the Fe atoms was small at a fast cooling rate. As such, both the size and number of Fe clusters showed no obvious changes.

Phase Separation and Structure Transition of Undercooled Fe75Cu25 Melts

A comparative study of metastable phase separation for undercooled liquid Fe35Cu65 alloy under natural and forced cooling conditions

Rapid Solidification Structure Refinement Mechanism in Highly Undercooled Cu Based Ternary Alloys

Observations and simulations for phase separation process of immiscible Fe50Sn50 alloy droplets placed on a chilling surface

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Dynamics and microstructural evolution of bulk amorphous Cu 12.5 Ni 10 Zr 41 Ti 14 Be 22.5 during phase separations: a small-angle neutron scattering approach

Connecting short-range order for the liquid-solid transition of Al-Cu-Fe alloys

Microstructure Refinement Mechanism of Undercooled Cu55Ni45 Alloys

Characterisation of Phase Separation in Drop-Tube-Processed Rapidly Solidified CoCrCuFeNi0.8 High-Entropy Alloy

A comparative study of macrosegregation evolution kinetics for undercooled Cu60Fe40 immiscible alloy during slow cooling and rapid cooling processes

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Dynamics and microstructural evolution of bulk amorphous Cu<sub>12.5</sub>Ni<sub>10</sub>Zr<sub>41</sub>Ti<sub>14</sub>Be<sub>22.5</sub> during phase separations: a small-angle neutron scattering approach

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Phase separation of a supersaturated nanocrystalline Cu Co alloy and its influence on thermal stability

Effects of cooling rate on the microstructure control and liquid–liquid phase separation behavior of Cu–Fe–P immiscible alloys

Phase selection and microstructure of slowly solidified Al-Cu-Fe alloys

Phase Separation Sequence and Its Effect on Subsequent Crystallization in Cu12.5Ni10Zr41Ti14Be22.5 Amorphous Alloy, As Probed by Small-Angle-neutron Scattering

On the devitrification of Cu–Zr–Al alloys: Solving the apparent contradiction between polymorphic liquid-liquid transition and phase separation

Atomic structure transition for various solidification paths of Pd40Ni40P20 at different cooling rates

Molecular Dynamics Research on Fe Precipitation Behavior of Cu95Fe5 Alloys during Rapid Cooling

Ab initio study of local structures during cooling of liquid Fe-C and Fe-Cr-C alloys