Abstract:Phase change composites (PCCs) based on polyethylene glycol (PEG) benefit from the encapsulation and restraint of porous supporting network, thus to achieve the results of high loading and no leakage. The graphene aerogel (GA)/PEG composite with ultra-high loading was improved by introducing hydrogen bonds into the traditional GA preparation process to reduce the severe volume shrinkage of GA. In other words, PEG works not only as a phase change matrix, but as hydrogen bond regulator to improve the volume of GA, which realized the dual-function of PEG. The resulting PEG-mediated GA (PGA) with significantly larger volume not only has super high loading as a supporting material, but gives PEG excellent photothermal storage performance as a light absorption enhancer. X-ray diffraction (XRD) results show that the introduction of PEG increases the layer spacing of GA, which is macroscopically reflected in the inhibition of volume shrinkage. The loading percentage increases from 97.56 % to 98.89 %, and the corresponding loading multiple increases sharply from 40-fold to 89-fold, which is the highest loading known based on PEG4000 as PCM. Higher loading means higher phase transition enthalpy retention. The melting enthalpies of P-GA and P-PGA are 177.92 J/g and 183.47 J/g, and the relative enthalpy efficiency is as high as 98.12 % and 99.82 %, respectively. Simultaneously, both of them have good thermal stability and cyclic stability, photothermal conversion and heat storage capacity efficiency is about 77.97 % and 85.89 %, respectively. All characterization results show that the prepared ultra-high loading PCCs further enhance the utilization of low-grade heat energy.

Polyethylene Glycol/Graphene Oxide Aerogel Shape-Stabilized Phase Change Materials for Photo-To-Thermal Energy Conversion and Storage Via Tuning the Oxidation Degree of Graphene Oxide

Preparation and Characterization of GO/PEG Photo-Thermal Conversion Form-Stable Composite Phase Change Materials

Synthesis of the Polyethylene Glycol Solid-Solid Phase Change Materials with a Functionalized Graphene Oxide for Thermal Energy Storage

Enhanced Comprehensive Performance of Polyethylene Glycol Based Phase Change Material with Hybrid Graphene Nanomaterials for Thermal Energy Storage

Polyethylene glycol based shape-stabilized phase change material for thermal energy storage with ultra-low content of graphene oxide

Hybrid graphene aerogels/phase change material composites: Thermal conductivity, shape-stabilization and light-to-thermal energy storage

Graphene aerogel stabilized phase change material for thermal energy storage

Graphene-oxide-induced Lamellar Structures Used to Fabricate Novel Composite Solid-Solid Phase Change Materials for Thermal Energy Storage

Enhanced Thermal Performance of Composite Phase Change Materials Based on Hybrid Graphene Aerogels for Thermal Energy Storage

The Influence of Interactions between Polyethylene Glycol and Graphene Oxide in Shape-Stabilized PCMs on their Phase Change Behaviors

Dual-functional polyethylene glycol/graphene aerogel phase change composites with ultrahigh loading for thermal energy storage

Polyethylene Glycol Supported by Phosphorylated Polyvinyl Alcohol/graphene Aerogel As a High Thermal Stability Phase Change Material

One-step preparation of double network phase change composite with GO for enhanced thermal management performance

Graphene Oxide Pickering Phase Change Material Emulsions with High Thermal Conductivity and Photo-Thermal Performance for Thermal Energy Management

Highly thermally conductive phase change composites with excellent solar-thermal conversion efficiency and satisfactory shape stability on the basis of high-quality graphene-based aerogels

One-step strategy to construct GA/PEG shape-stabilized phase change material with excellent thermophysical properties

Shape-stabilized, thermally conductive phase-change composites for thermal energy storage

AAZO-Graphene Composite Phase Change Materials with Photo-thermal Conversion Performance

Graphene Aerogels Enhanced Phase Change Materials Prepared by One-Pot Method with High Thermal Conductivity and Large Latent Energy Storage

Fabrication of Shape-Stable Composite Phase Change Materials Based on Lauric Acid and Graphene/graphene Oxide Complex Aerogels for Enhancement of Thermal Energy Storage and Electrical Conduction

Improving the shape stability and photothermal conversion performance of phase change materials through three-dimensional metal-organic network