Abstract:The adsorption of weighty metal particles from contaminated water sources has garnered significant attention due to its critical role in environmental remediation and ensuring safe drinking water. Heavy metal ions can be removed from water using conventional adsorbents such as activated zeolites; however, these materials have low absorption and slow kinetics. To solve these issues, carbon-based adsorbents that exhibit easy synthesis, high porosity, design ability, and stability have been proposed. In this review, a carbon-based adsorbent, named M-NC, and graphene oxide were created for the particular evacuation of weighty metal particles. To increase the potential for Heavy Metals (HM) immobilization, sulfide-modified biochar was created via a process called synchronous carbon layer epitome. A hypothetical physicochemical and thermodynamic examination of the adsorption of weighty metals Zn 2+ , Cd 2+ , Ni 2+ , Ag 2+ , Pb 2+ and Cu 2+ on carbon-based adsorbents was done with factual material science fundaments. The biochar with large surface areas is utilized to eliminate weighty metal particles, quite possibly the most significant heavy metal pollutants, from aqueous solutions. The limit of the adsorbent for eliminating weighty metal ions was concentrated on utilizing Langmuir adsorption isotherm under ultrasound-helped conditions. The Mesoporous Silica Nanoparticles (MNCs) can be applied to the Langmuir model and pseudo-second-order kinetics. It is possible to use the Langmuir and second-order kinetic equations to accurately explain the adsorption method. Thermodynamic limitations were also envisioned because sorption is exothermic when it happens spontaneously. A homogeneous measurable physical science adsorption typically was utilized to describe and analyze the experimental heavy metal removal isotherms at 30°C and pH 5 utilizing adsorbents produced by pyrolysis of biomasses (broccoli stalks). The experimental results were investigated in terms of Langmuir and pseudo-2nd-order kinetic equations, Freundlich and isotherm models. The outcome of pH, initial heavy metal ion concentration, contact time, and adsorbent dosage regarding the adsorption capacity and removal efficiency of Pb 2+ and Cd 2+ on the hydrogel was examined. This study contributes to the advancement of information in the ground of environmentally friendly heavy metal removal techniques, specifically focusing on the usage of biomass-based adsorbents. These findings have the potential to address the need for effective solutions in water purification and environmental cleanup efforts.

Graphdiyne Filter for Decontaminating Lead-Ion-Polluted Water

Rationally Designed MoS2 Nanosheet Arrays on Activated Carbon Fibers for Rapid and Selective Lead Removal

Preparation of activated carbon fibers rich in S/N/O adsorption sites for selective and efficient trace Pb(II) removal from drinking water

Direct/Alternating Current Electrochemical Method for Removing and Recovering Heavy Metal from Water Using Graphene Oxide Electrode

Fabrication of novel inorganic mineral-polymer composite polydopamine-modified diatomaceous earth @ polydopamine-polyethyleneimine/calcium alginate and its highly effective applications in lead ions adsorption

Preparation of electrospun polyvinylidene fluoride/amidoximized polyacrylonitrile nanofibers for trace metal ions removal from contaminated water

Amidoxime-Functionalized Macroporous Carbon Self-Refreshed Electrode Materials for Rapid and High-Capacity Removal of Heavy Metal from Water

Adsorption of heavy metal ions by carbon-based adsorbent using magnetic nitrogen-doped carbon and graphene oxide

Synthesis of a nitrogen-rich dendrimer grafted on magnetic nanoparticles for efficient removal of Pb(ii) and Cd(ii) ions

Functionalized Activated Carbon Fibers by Hydrogen Peroxide and Polydopamine for Efficient Trace Lead Removal from Drinking Water

Superior adsorption performance of graphitic carbon nitride nanosheets for both cationic and anionic heavy metals from wastewater

Achieving High-Efficiency and Ultrafast Removal of Pb(ii) by One-Pot Incorporation of a N-doped Carbon Hydrogel into FeMg Layered Double Hydroxides

A review of functionalized carbon nanotubes and graphene for heavy metal adsorption from water: Preparation, application, and mechanism

Metastable Nano-Zirconium Phosphate Inside Gel-Type Ion Exchanger for Enhanced Removal of Heavy Metals.

Functionalized hollow MnFe2O4 nanospheres: design, applications and mechanism for efficient adsorption of heavy metal ions

Green Synthesis of Reusable Adsorbents for the Removal of Heavy Metal Ions

Preparation of Graphene Adsorbents and Their Applications in Water Purification

Carbonizing hollow metal–organic framework/layered double hydroxide (MOF/LDH) nanocomposite with excellent adsorption capacity for removal of Pb(II) and organic dyes from wastewater

Polyacrylic acid functionalized superparamagnetic iron-oxide supraparticles for highly efficient adsorption and removal of contaminants from water

A Graphene-Based Porous Composite Hydrogel for Efficient Heavy Metal Ions Removal from Wastewater

A multifunctional adsorbent based on 2,3-dimercaptosuccinic acid/dopamine-modified magnetic iron oxide nanoparticles for the removal of heavy-metal ions