Abstract:Temperature control of electronic devices is becoming increasingly important. A better temperature control strategy could improve system performance without any change in the hardware-based thermal design. However, the development of temperature control algorithms is still challenging due to the multiple inner heat sources and thermal constraints, which causes a widespread use of the basic look-up table method on current devices. In this paper, the control performance of model predictive control (MPC) on a laptop is numerically evaluated based on the MATLAB/FLUENT co-simulation framework. In the MPC algorithm, a skin temperature reconstruction model is contained to online estimate the temperature of exterior surfaces based on the information of inner sensors, and a simplified temperature prediction model is utilized to predict the future temperature of both the exterior surfaces and inner sensors. The individual control of the charging current and fan speed show that compared to the baseline look-up table method, the MPC could improve the cumulative charging capacity in 20 min by 20% − 40% under different scenarios, and reduce the average and maximum fan speed by about 30% and 23% respectively. The outstanding performance and low computational cost altogether demonstrate that the MPC algorithm has tremendous potential for practical applications.

Design of Fractional Order Modeling Based Extended Non-Minimal State Space MPC for Temperature in an Industrial Electric Heating Furnace

Fractional Order MPC Design Using Improved State Space Model

A Thermal Management Strategy for Proton Exchange Membrane Fuel Cell via Nonlinear Model Predictive Control

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Multimodel Fractional Predictive Functional Control Design with Application on an Industrial Heating Furnace

An Improved Model Predictive Control Approach Based on Extended Non-Minimal State Space Formulation

Support vector machine based predictive functional control design for output temperature of coking furnace

Multi-loop Nonlinear Internal Model Controller Design Based on a Dynamic Fuzzy Partial Least Squares Model

Temperature Control of Industrial Coke Furnace Using Novel State Space Model Predictive Control

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

Adaptive Model Predictive Control Scheme for Partially Internal Thermally Coupled Air Separation Column

New Pid Controller Design Using Extended Nonminimal State Space Model Based Predictive Functional Control Structure

Predictive control optimization based PID control for temperature in an industrial surfactant reactor

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

Adaptive State Feedback Predictive Control and Expert Control for A Delayed Coking Furnace

A practical predictive control algorithm for embedded system and its application

General type industrial temperature system control based on fuzzy fractional-order PID controller

Real-Time Implementation of Improved State-Space MPC for Air Supply in a Coke Furnace

Temperature control of reheating furnace based on distributed model predictive control

Development of a continuous reheating furnace state-space model based on the finite volume method

Numerical investigation on model predictive control of portable electronic devices based on MATLAB/FLUENT co-simulation framework