Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke
Anjun Ma,Shilin Zhao,Hui Luo,Kang Sun,Hesong Li,Yanqun Zhu,Zhiqiang Sun
DOI: https://doi.org/10.1021/acsomega.2c03449
IF: 4.1
2022-01-01
ACS Omega
Abstract:In this work, the effects of coal-fired flue gas components (O2, CO2, SO2, and NO) on the Hg0 removal by the promising mercury removal adsorbent mechanochemical S-modified petroleum coke were characterized and analyzed in terms of the Hg0 removal efficiency, mercury adsorption capacity, and mercury mass balance. The results show that the mechanochemical S-modified petroleum coke with a theoretical sulfur content of 21% (named TSC-21) is the best candidate for mercury removal based on the Hg0 removal efficiency, Hg0 removal capacity, and difference ratio of Hg0 removal capacity (anti-interference ability) in the basic and full-component simulated flue gas atmosphere (N2 + O2 + CO2, N2 + O2 + CO2 + SO2 + NO). The maximum value (MV) and stable value (SV) of the Hg0 removal efficiency of TSC-21 in the basic simulated flue gas atmosphere are 99.25% (MV) and 91.17% (SV), respectively. O2, CO2, and NO all promote the Hg0 removal by the adsorbent, but they benefit the Hg0 oxidation while inhibiting the Hg0 adsorption. The promoting effect of O2 on the Hg0 removal by TSC-21 is affected by the reaction time, which is especially obvious after 1 min. The presence of SO2 inhibits the oxidation and adsorption of Hg0, which in turn reduces the Hg0 removal performance of the adsorbent. The improving effects on the oxidative escape of Hg0 by CO2 is higher than that by NO and O2. TSC-21 acts more as an oxidant than an adsorbent for Hg0 removal.