Abstract:As the energy level requirement increases in pulsed power applications, it becomes necessary to utilize multiple air-core pulsed alternators discharging into the load. The counter-rotating pulsed alternator pairs can also compensate torque and gyroscopic effects of pulsed alternators. The whole work process of multiple pulsed alternators can also be divided into self-excitation process and discharge process. In the self-excitation process, the alternators work separately and the effect of phase angle mismatch is ignored. However, in the discharge process, the armature windings are connected in series or in parallel to share the output voltage or current. The phase angle mismatch between the alternators will affect the waveform of the output current of each alternator in discharge process and the rotational speed after discharge process, so the phase angle mismatch becomes a key factor of the system. Phase angle mismatches are introduced in this paper to see how it affects the work process of multiple air-core pulsed alternator systems. Based on some simplifications, the analytical analyses are performed. As to two alternators connected in series, the phase angle mismatch will not cause greater damage to the discharge switch. However, at the end of discharge process, only one alternator acts as a generator and the other alternator as a motor. As for two alternators connected in parallel, the maximum discharge current of the slave alternator is larger than the one of the master alternator. The phase angle mismatch will also lead to bad results for the torque and gyroscopic effects compensation after discharge in both series and parallel connection mode. To verify the conclusions of the analytical analyses, some simulations are performed on two identical pulsed alternators except for their phase angle. The results and conclusions of the analyses and simulations can offer guidance for the design and optimization of multiple air-core pulsed alternator systems.

High-Efficiency Control Strategy of an Air-Core Pulsed Alternator Pair

Energy Reclaim Control of an Air-Core Pulsed Alternator

A Flexible Waveform Conditioning Strategy of an Air-Core Pulsed Alternator

Design of 1.5 kW-Level Anode Power Supply for Magnetic Focusing Hall Thruster

Evaluation of Pulsed Power Sources for Plasma Generation

Design and Simulation of a Novel Self-Excitation and Discharge Separated Type Air-Core Pulsed Alternator

High-Frequency High-Density Bidirectional EV Charger

Novel Multiple-switch Pulsed Power Technologies

Design and Simulation of 4MJ Air-Core Pulsed Alternator

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Analytical Expression for Discharge Process of Multiphase Air-Core Pulsed Alternators

Investigation on Phase Angle Mismatch of Multiple Air-Core Pulsed Alternators

Design and Optimization of an Axial-flux Half Air-core Compensated Pulsed Alternator Used for Energy System Integration

Study on the Self-Excitation Condition of a Two-Phase Air-Core Pulsed Alternator

Overview Of Pulsed Alternators

A High Step-Up DC to DC Converter under Alternating Phase Shift Control for Fuel Cell Power System

Design and Analysis of a High-Speed Permanent Magnet Compensated Pulsed Alternator

Design and Optimization of a Hybrid Excitation System for Magnetically Driven Rotating DC Arc Plasma Generators

Anti-shock analysis of the electromagnetic launched projectile powered by the pulsed alternator

Research of a Modular Pulsed Alternator Power System

Self-Excitation and Energy Recovery of Air-Core Compulsators