Abstract:<section class="article-section__content"><p>The parallel air‐cooled system is commonly applied in electric vehicles to cool the battery pack, in which flow pattern significantly influences the system cooling performance. In this paper, the curved divergence and convergence plenums are used to design the flow pattern in the parallel air‐cooled system for battery thermal management. The computational fluid dynamics (CFD) method is used for performance evaluation of the cooling system. The height distribution of control points is used to describe the plenum shape. During the optimization process, flow resistance network model is employed to obtain the velocity distribution of the system. An effective strategy is developed to adjust the height distribution of the control points for flow pattern design. Experiments are conducted to verify the CFD method and calculation model. Then typical cases are adopted to evaluate the proposed strategy for flow pattern design. The numerical results show that the strategy can effectively control the system flow pattern by designing the plenum shape. The cell temperature difference of the optimized system achieves an 86% reduction with the pressure drop only increased by 26%. Furthermore, compared with the optimized system with linear plenums in the reference, the optimized system with curved plenums achieves 48% reduction for the cell temperature difference without the pressure drop increased. Finally, experiments are conducted for the optimized system to verify the effectiveness of the developed strategy. The present study can provide a guide for the design of efficient parallel air‐cooled BTMS.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Highlights</h3><ul class="unordered-list"><li>Shape optimization of the curved plenums for air‐cooled BTMSs is conducted.</li><li>Effective strategy is developed to optimize the shape of curved plenums.</li><li>Δ<i>T</i><sub>max</sub> of the optimized BTMS is reduced by 86% with Δ<i>P</i> only increased by 26%. </li><li>Optimized BTMS with curved plenums performs better than that with linear plenums.</li><li>Experiments are done to verify the calculation models and optimization strategy.</li></ul></section>

Configuration Optimization of Battery Pack in Parallel Air-Cooled Battery Thermal Management System Using an Optimization Strategy

An Intelligent Thermal Management System for Optimized Lithium-Ion Battery Pack

Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement

Experimental and numerical investigation on efficient optimization of battery thermal management systems

A direct optimization strategy based on field synergy equation for efficient design of battery thermal management system

A novel optimization method based on inverse calculation model for efficient design of battery thermal management system

Efficient Design of Battery Thermal Management Systems for Improving Cooling Performance and Reducing Pressure Drop

Cooling performance optimization of air-cooled battery thermal management system

Numerical Study on Performance Enhancement of the Air-Cooled Battery Thermal Management System by Adding Parallel Plates

Design of flow pattern in air‐cooled battery thermal management system

A J-Type Air-Cooled Battery Thermal Management System Design and Optimization Based on the Electro-Thermal Coupled Model

Structure optimization of air-cooled battery thermal management system based on neural network

Optimization, Modelling and Analysis of Air-Cooled Battery Thermal Management System for Electric Vehicles

Experimental and numerical studies on an efficient transient heat transfer model for air-cooled battery thermal management systems

Configuration, design, and optimization of air-cooled battery thermal management system for electric vehicles: A review

Thermal management scheme and optimization of cylindrical lithium-ion battery pack based on air cooling and liquid cooling

Cooling performance optimization of air cooling lithium-ion battery thermal management system based on multiple secondary outlets and baffle

Optimization of the Cooling Performance of Symmetric Battery Thermal Management Systems at High Discharge Rates

Optimization strategy for battery thermal management system with phase change materials, aerogel and cold plates

Modeling and optimization of liquid-based battery thermal management system considering battery electrochemical characteristics

An air-cooled system with a control strategy for efficient battery thermal management