Abstract:To address the current problem of decoupling between joints and the fixed synergy relationship of underactuated fingers, an adaptive and dexterous underactuated finger named the LMH finger was designed in this article. The LMH finger has two degrees of actuation (DoAs) and three degrees of freedom (DoFs) based on the predefined elastic force (PEF) gradient, which actively changes the joint coupling relationship and the synergistic control structure. With the changes in the driving forces and external forces, the LMH finger is used to establish three conditional synergistic control (CSC) laws for the mutual transformation of adaptivity and dexterity. With a double-tendon-pulleyed winding mechanism and a PEF gradient, the LMH finger provides three single-joint independent motion modes and four multijoint synergistic motion modes in a simple differential control of double driving forces. To improve the antagonistic control ability of bending and extension and the enveloping ability, the crank–slider and crank–rocker mechanisms of the LMH finger provide a force synergy mechanism and a continuous contact surface for replaceable modules. Depending on the control conditions of driving forces, external forces, and PEFs, the LMH finger can approximately achieve the dexterity of human fingers in the pregrasping stage and adaptivity in the grasping stage. Finally, the CSC method and the design paradigm are successfully applied to a two-DoA and six-DoF underactuated two-fingered hand for symmetric and asymmetric dexterous manipulations, which verifies the improvement in the grasping adaptability and manipulative dexterity.

Design And Optimization Of A Tendon-Driven Robotic Hand

A Tendon-Driven Robotic Dexterous Hand Design for Grasping

Design and Control of a Tendon-Driven Robotic Finger Based on Grasping Task Analysis

Design of Humanoid Robotic Hand Based on Link Underactuation

Towards higher load capacity: innovative design of a robotic hand with soft jointed structure

A Tendon-Driven Dexterous Hand Design with Tactile Sensor Array for Grasping and Manipulation

Design of a Compact Anthropomorphic Robotic Hand with Hybrid Linkage and Direct Actuation.

CATCH-919 Hand: Design of a 9-actuator 19-DOF Anthropomorphic Robotic Hand

Optimal Control and Grasping for a Robotic Hand with a Non-linked Double Tendon Arrangement

A Novel Design of a Multi-Fingered Bionic Hand With Variable Stiffness for Robotic Grasp

Design of a Super Underactuated Dexterous Robotic Hand

Optimization Design for Dexterous-Hand of Mobile Robot

Mechanical Design and Analysis of a Novel Dexterous Hand Based on Grasping Manipulation.

The anthropomorphic design and experiments of HIT/DLR five-fingered dexterous hand

Adaptive and Dexterous Tendon-Driven Underactuated Finger Design with a Predefined Elastic Force Gradient

Kinematics and dynamics of a tendon-driven prosthetic finger

Design and Experimental Evaluation of a New Modular Underactuated Multi-Fingered Robot Hand

HIT Prosthetic Hand Based on Tendon-Driven Mechanism

Mechanism Design and Kinematic Analysis of a Robotic Modular Finger and Reconfigurable Hand

System Design and Kinematic Analysis of a Dexterous Hand with Humanoid Characteristics

Design and Control of a Coupling Mechanism-Based Prosthetic Hand