Performance of Partial-Denitrification Process Providing Nitrite for Anammox in Sequencing Batch Reactor (SBR) and Upflow Sludge Blanket (USB) Reactor

Rui Du,Shenbin Cao,Meng Niu,Baikun Li,Shuying Wang,Yongzhen Peng
DOI: https://doi.org/10.1016/j.ibiod.2017.04.018
IF: 4.907
2017-01-01
International Biodeterioration & Biodegradation
Abstract:Partial-denitrification (nitrate (NO3--N) nitrite (NO2--N)) holds great potential in treating NO3--N contained wastewater, by combining with anammox process. In this study, performance of NO2--N production in partial-denitrification was investigated in two installations: sequencing batch reactor (SBR) and upflow sludge blanket (USB) reactor. Results indicated that partial-denitrification was established successfully in both of SBR and USB, with the NO2--N production rate (NPR) of 0.13-2.11 kg N m(-3) d(-1) and 0.90-13.03 kg N m(-3) d(-1), respectively. The NO3--N to NO2--N transformation ratio (NTR) was approximately 83.3% in SBR, while NTR of 51.0%-713% was obtained in USB. Sludge granulation was observed in both two reactors during the operation. In SBR, granular diameter of 1.5-2.0 mm was reached with sludge volume index (SVI) of 543 mL gSS(-1), and 2.0-3.0 mm in USB with SVI of 62.1 mL gSS(-1). Additionally, the ratio of COD to NO2--N (COD/NO2--N) and NO3--N to NOx--N percentage (NP) in partial-denitrification effluent demonstrated its suitability for subsequent anammox. While, partial-denitrification conducted in SBR was more suitable for low NO3--N wastewater (30 mg L-1), and USB was appropriate for high-strength sewage. Results obtained in this study provide a solid foundation for future applying partial-denitrification combined with anammox process in treating NO3--N contained wastewater. (C) 2017 Elsevier Ltd. All rights reserved.
What problem does this paper attempt to address?