Abstract:Crack sizes, geometrical configurations of specimens and structures, as well as loading conditions have significant effect on in-plane and out-of-plane constraint effects. Safety assessment with constraint effects can effectively improve the accuracy. There are prominent discrepancies between compressive fracture and tensile fracture. Most of engineering structures are usually under biaxial loading conditions, so that the influence of biaxial compressive loading on fracture analysis with constraint effects is worth paying attention. The size effect factor (relative crack length a/W, thickness to width ratio t/W and crack inclination angle β) and load factor (lateral pressure coefficient λ) of central cracked plate (CCP) specimens with I-II mixed mode crack on constraint effects under biaxial compressive loading have been investigated through theoretical analysis and finite element analysis. In-plane non-singular T-stress (T 11) and its components (T x, T y, and T xy), out-of-plane non-singular T-stress (T 33), out-of-plane constraint parameter T z and stress triaxiality factor h have been adopted to quantify constraint effects. It demonstrates that λ has remarkable influence on SIF, T 11 and T 33 under biaxial compressive loading. The effect of higher a/W (long cracks) on B 11 is more noticeable when I-II mixed mode crack is closer to pure mode II crack or pure mode I crack. The proportion of shear fracture increases under biaxial compression with λ. With the increase of β, B 33 decreases sharply and then increases rapidly with higher λ. T z can directly reflect stress states and adequately describe the loss of out-of-plane constraint. The stress state of crack tip is more likely to asymptotic plane-strain condition ahead of crack tip under compression. There are crucial differences in variation range and tendency of T z subjected to biaxial tensile and biaxial compressive loading. Moreover, T z is insensitive to λ. Stress triaxiality factor h can illustrate in-plane and out-of-plane constraint effects including size effect and load factor (sensitive to a/W, t/W, β and λ), especially can be adopted as a unified constraint parameter for long cracks under biaxial compressive loading. The in-plane T-stress components can be directly calculated by T 11 under biaxial compression. The empirical equations of K II and T 11 containing size effect and load factor simultaneously are effective and convenient for applications.

Investigation of the effects of confining pressure on SIFs and T-stress for CCBD specimens using the XFEM and the interaction integral method

Effect Of Confining Pressure On Stress Intensity Factors For Cracked Brazilian Disk

Investigation of Stress Intensity Factors for an Interface Crack in Multi-Interface Materials Using an Interaction Integral Method

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Direct Computation of 3-D Stress Intensity Factors of Straight and Curved Planar Cracks with the P-Version Finite Element Method and Contour Integral Method

Investigation of Mixed-Mode Stress Intensity Factors for Nonhomogeneous Materials Using an Interaction Integral Method

DBEM computation of T-stress and mixed-mode SIFs using interaction integral technique

An interaction integral method for 3D curved cracks in nonhomogeneous materials with complex interfaces

Effects of T-Stress on Fracture Behavior of Central-Cracked Stiffened Plate

Investigation on in-plane and out-of-plane constraint effects for plates with I-II mixed mode cracks under biaxial compressive loading

Geometry and material constraint effects on fracture resistance behavior of bi-material interfaces

Performance of Hexagonal CFST Members under Axial Compression and Bending

An interaction integral method coupled with special crack tip elements for evaluation of stress intensity factors

Determination of Fracture Parameters in Center Cracked Circular Discs of Concrete under Diametral Loading: A Numerical Analysis and Experimental Results

Behavior of large SCFST column with different confinement effects under pseudo-static loading

Analysis of mixed-mode Compact-Tension-Shear (CTS) specimens with slanted propagating cracks

Numerical Analysis of the Stress Intensity Factor for Two Kinds of Mixed-Mode Crack Specimens

Study on fracture behavior in stiff-thin-film-on-soft-substrate structures under biaxial stress state

Stress Intensity Factor Evaluations for a Curved Crack in Orthotropic Particulate Composites Using an Interaction Integral Method

The Interaction of a Mode II Crack with an Inhomogeneity Undergoing a Stress-Free Transformation Strain