Abstract:A multifunctional boron‐doping graphene/lithium carbonate (BG/LCO) nanointerfacial interphase is designed on the surface of commercial LiFePO4 particles using a CO2 reduction method. This innovation first leverages the self‐catalytic properties of the BG/LCO layer to create a robust inorganic LiF‐rich CEI while simultaneously enhancing electron and Li+ conductivity and strengthening FeO bonding. Lithium iron phosphate (LFP) cathode is renowned for high thermal stability and safety, making them a popular choice for lithium‐ion batteries. Nevertheless, on one hand, the fast charge/discharge capability is fundamentally constrained by low electrical conductivity and anisotropic nature of sluggish lithium ion (Li+) diffusion. On the other hand, the interface and internal structural degradation occurs when subjected to high‐rate condition. Herein, a multifunctional boron‐doping graphene/lithium carbonate (BG/LCO) nanointerfacial layer on surface of commercial LiFePO4 particles is designed, in which the BG layer catalyzes the rapid reaction of Li2CO3‐LiPF6 for homogeneous and mechanically robust inorganic LiF‐rich structure across the cathode‐electrolyte interphase (CEI), forms a conductive network to significantly enhance both electron and Li+ transport, and strengthens the FeO bonding to minimize both Fe loss and the formation of Fe‐Li antisite defects. Correspondingly, the modified LFP cathode achieves a high capability of 113.2 mAh g−1 at 10 C and extraordinary cyclic stability with 88.0% capacity retention over 1000 cycles as compared to the pristine LFP cathode with a capacity of only 94.0 mAh g−1 and 64.6% capacity retention. It also exhibits great enhancements of 20.1% and 3.7% at higher‐rate condition (room temperature/15 C) and the low temperature condition (−10 °C/1 C), respectively.

Batteries: A New Strategy to Effectively Suppress the Initial Capacity Fading of Iron Oxides by Reacting with LiBH4 (Adv. Funct. Mater. 16/2017)

A New Strategy to Effectively Suppress the Initial Capacity Fading of Iron Oxides by Reacting with LiBH4

Batteries: Highly Stable Cycling of Amorphous Li2CO3-Coated α-Fe2O3 Nanocrystallines Prepared via a New Mechanochemical Strategy for Li-Ion Batteries (Adv. Funct. Mater. 3/2017)

Catalytic Strategies Enabled Rapid Formation of Homogeneous and Mechanically Robust Inorganic‐Rich Cathode Electrolyte Interface for High‐Rate and High‐Stability Lithium‐Ion Batteries

A Novel Strategy to Significantly Enhance the Initial Voltage and Suppress Voltage Fading of a Li- and Mn-rich Layered Oxide Cathode Material for Lithium-Ion Batteries

Improved Cycling Stability of LFP by W-Ti Co-Doping Strategy for Li-Ion Batteries

Enhancing the Capacity and Stability by CoFe2O4 Modified g-C3N4 Composite for Lithium-Oxygen Batteries

Imidazole‐Intercalated Cobalt Hydroxide Enabling the Li+ Desolvation/Diffusion Reaction and Flame Retardant Catalytic Dynamics for Lithium Ion Batteries

Suppress oxygen evolution of lithium-rich manganese-based cathode materials via an integrated strategy

Li–O2 Batteries: Interfacial Super‐Assembled Porous CeO2/C Frameworks Featuring Efficient and Sensitive Decomposing Li2O2 for Smart Li–O2 Batteries (Adv. Energy Mater. 40/2019)

Suppressing Voltage Fading of Li‐Rich Oxide Cathode via Building a Well‐Protected and Partially‐Protonated Surface by Polyacrylic Acid Binder for Cycle‐Stable Li‐Ion Batteries

A Novel Y7O6F9 Modified Li4Ti5O12 Composite with the Effect of Inhibiting Electrolyte Decomposition for Lithium Ion Batteries

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

A Novel Strategy to Suppress Capacity and Voltage Fading of Li‐ and Mn‐Rich Layered Oxide Cathode Material for Lithium‐Ion Batteries

Enhancing the Capacity and Stability by CoFe<sub>2</sub>O<sub>4</sub> Modified g-C<sub>3</sub>N<sub>4</sub> Composite for Lithium-Oxygen Batteries

Lattice Oxygen Redox Reversibility Modulation in Enhancing the Cycling Stability of Li‐Rich Cathode Materials

Mechanical Milling Assisted Synthesis and Electrochemical Performance of High Capacity LiFeBO3 for Lithium Batteries

Achieving High Stability and Capacity in Micron‐Sized Conversion‐Type Iron Fluoride Li‐Metal Batteries

Understanding Boron Chemistry as the Surface Modification and Electrolyte Additive for Co‐Free Lithium‐Rich Layered Oxide

Constructing a robust integrated surface structure for enhancing the performance of Li-rich Mn-based oxides cathodes

A Review of Capacity Fade Mechanism and Promotion Strategies for Lithium Iron Phosphate Batteries